DeWALT Router Bearings

Fix Number

FIX10188435

Manufacturer Part Number

N110359

This authentic ball bearing is sold individually. It can be used in a variety of differently model types, such as miter saws, circular saws, table saws, and angle grinders. This ball bearing is sealed on both sides. Its job is to minimize friction between rotating parts. The armature rotates at a very fast rate, so after years of use, it is normal for the bearings to wear.

Fix Number

FIX10166095

Manufacturer Part Number

146555-01

Genuine Manufacturer Sourced replacement part used on a variety of equipment. This part is made out of Metal and is Sold Individually. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the tool and allows it to run smoothly. Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement. Included in part number 395843-00

Fix Number

FIX10186736

Manufacturer Part Number

A27537

This ball bearing is used on some compact routers made by DeWALT and Porter Cable. It is an authentic part made by original manufacturer. Ball bearings reduce friction between moving parts while helping secure them in position. These are replaced fairly often due to their high wear role. Sold individually.

Fix Number

FIX10169630

Manufacturer Part Number

330003-60

This is a bearing, and it is used in various power tools. It is meant to reduce tension between the moving parts within the tool. This bearing has a 1 inch outer diameter, less than 1/4-inch inner diameter, and green walls.

Fix Number

FIX16680866

Manufacturer Part Number

605040-06

This is replacement ball bearing is a commonly used item on a variety of power tools. Bearings are specially designed to allow connected parts to rotate smoothly. The way it is build it will minimize friction between the rotating parts. This is a sealed metal bearing generally used with an armature. Includes one (1) bearing per order. Steps to replace this bearing would be different from one model to another. However, general steps to complete this repair would be the same. You may need a screwdriver and pliers to finish this job. • Make sure the unit is unplugged • Remove the cover/housing • Disengage the brushes • Remove the armature • Remove the old bearing • Install the new bearing • Reassemble unit and test the equipment

Fix Number

FIX10180909

Manufacturer Part Number

605040-23

Included in part number 143835-02

Fix Number

FIX10186716

Manufacturer Part Number

A26125

It is a genuine manufacturer-supplied item that is made for use with DeWALT and Porter Cable compact routers. This is a special component which helps to secure the fan end bearing. Unfortunately, over time the material will wear out or it can get damaged eventually requiring a replacement. Refer to the appropriate diagrams for your model to ensure the correct repair procedure. Keep in mind it is made of durable material and is sold individually.

Fix Number

FIX11928494

Manufacturer Part Number

868132-03

It is a genuine replacement part that is supplied by the original manufacturer for use with Dewalt and Black and Decker routers. This bearing is used to support the armature while allowing it to rotate freely with minimal frictions. Symptoms of ailing armature bearings may include squealing, screeching, and rough performance eventually requiring replacement to maintain peak performance. Please note this high-quality metal bearing is sold individually.

Fix Number

FIX10185104

Manufacturer Part Number

868151-00

Fix Number

FIX10186717

Manufacturer Part Number

A26126SV