OEM Snapper Pressure Washer Parts & Accessories

Nozzle, Soap

$16.02

Fix Number: FIX8911521
Manufacturer Part Number: 198841GS

This is an authentic replacement part manufactured for use with pressure washers. The nozzle is used to provide an even spray when using soap or a chemical cleaner. This black soap nozzle is available as an individual replacement part, please see model diagram for nozzle kits for a specific model pressure washers.

Chemical Injection Kit

$34.34

Fix Number: FIX8911045
Manufacturer Part Number: 192914GS

It is a high-quality item that is supplied by the original equipment for use with Briggs and Stratton, Troy-Bilt and Snapper pressure washers. The kit includes a fitting that allows a user to connect the hose that supplies the chemical cleaning solution. Unfortunately, over time components on your equipment may wear out or get damaged eventually requiring a replacement. Make sure to check the appropriate diagrams and the owners manual of your model for the correct installation of these parts. The kit includes one durable brass fittings, a metal ball, a spring and a rubber seal. To replace it, you will need a wrench set to remove the old fitting and secure the new one.

Kit, Outlet,anodized

$56.95

Fix Number: FIX9268969
Manufacturer Part Number: 190589GS

This is an original part from Briggs and Stratton, Troy-Bilt, and Snapper for use with Pressure Washers. The outlet tube kit includes the O-ring. The pressure hose connects to the outlet tube, which threads onto the pump. The tool that you will need to replace the outlet tube kit is a Wrench Set.

Garden Hose Filter

$6.42

Fix Number: FIX9181874
Manufacturer Part Number: B2384GS

This is a genuine OEM sourced replacement part that is intended to be used with pressure washers from Craftsman. The screen fits into the water inlet tube and is used to prevent debris from the hose from entering the pump assembly. This item is available as an individual replacement part.

Water Outlet Kit

$38.52

Fix Number: FIX8911836
Manufacturer Part Number: 201497GS

This is a genuine OEM replacement part sourced directly from Craftsman. This part is commonly used in pressure washers. This outlet tube is what connects the pump in the pressure washer to the hose. The outlet tube is made of aluminum, and the o-ring is made of rubber. The outlet tube is easy to install, one end threads onto the pump, the other onto the hose. You will need a wrench to ensure the replacement part is secure.

Fixes these symptoms

Leaks water
See more...

Pressure Washer Pump Assembly

$261.95

Fix Number: FIX9270371
Manufacturer Part Number: 207365GS

Pressure washer pump kit. If the pressure washer is leaking water, the pump may need to be rebuilt or replaced. If the pump is more than a few years old, and you use the pressure washer fairly often, replace the pump.

18oz 30w 4 Cycle Oil

$10.15

Fix Number: FIX8817222
Manufacturer Part Number: 100005

This bottle of oil can be used in over 150 different types of machinery. It is most commonly used for pressure washers and generators from manufacturers such as Briggs and Stratton and Troy-Bilt. This detergent oil is warranty approved and specially compounded for warm weather use. Please note: it is important to avoid over filling your engine with oil.

Engine Retaining Ring

$6.25

Fix Number: FIX11829825
Manufacturer Part Number: 703976

Fuel Valve With Bushing

$26.70

Fix Number: FIX8911051
Manufacturer Part Number: 192980GS

This fuel valve with bushing fits a variety of outdoor equipment and allows the fuel to smoothly flow into the gas engine. The bushing part is pressed into the hole provided in the fuel tank and the fuel valve is pressed through the bushing to reach the inside of the fuel tank. If your fuel valve is broken then it best to replace it. Refer to the manual provided by the manufacterer for more information on the part and installation instructions. Safety tip: remember to wear gloves and be cautious when removing fuel from the tank.

Fixes these symptoms

Will Not Start
See more...

Kit, Handle Fastening

$7.92

Fix Number: FIX9181264
Manufacturer Part Number: B2203GS

This is a genuine item that is supplied directly from the original equipment manufacturer for use with Troy-Bilt and Briggs and Stratton pressure washers. It is an identical replacement for a missing or a faulty handle fastening kit that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of these components. This high-quality kit is sold individually, keep in mind it includes two durable plastic grips and two bolts to secure them.

Snapper Pressure Washer Parts

Popular Snapper Pressure Washer Parts

Snapper Pressure Washer Appliance Types

Related Snapper Pressure Washer Parts

Popular Snapper Pressure Washer Models

Snapper Pressure Washer Parts

Start With Your Model Number

Popular Snapper Pressure Washer Parts

Snapper Pressure Washer Appliance Types

Related Snapper Pressure Washer Parts

Popular Snapper Pressure Washer Models