OEM Black and Decker Pressure Washer Parts & Accessories

SA TUBE, LSW321

$10.08

Fix Number: FIX18994050
Manufacturer Part Number: N504103

Foot

$55.21

Fix Number: FIX9963819
Manufacturer Part Number: 5140095-03

This is a genuine OEM replacement part that has been sourced directly from DeWalt. This rubber foot is mounted to the bottom of the frame of your pressure washer. Rubber feet reduce movement, vibration, and noise. They also help keep you pressure washer balanced. This replacement comes with one rubber foot, and one metal torx screw. You will need basic hand tools to install a replacement foot on your pressure washer.

Soap Injector Kit

$54.74

Fix Number: FIX9964107
Manufacturer Part Number: 5140117-47

This is an authentic OEM replacement part that has been sourced directly from DeWalt. This soap injector kit comes with everything you need to replace the injector on your pressure washer. This kit is designed for use with select DeWalt pressure washers, to ensure this part is compatible with your device please see the "Model Cross Reference List" below. The purpose of this kit is to inject soap into the stream of water. Over time, the spring can lose tension or the parts can wear down, at which point you will need a replacement. The kit consists of one durable metal injector body, the spring, and the ball. Kits are sold individually.

Fixes these symptoms

Leaks water
See more...

NUT .625 PAL PRESS W

$6.51

Fix Number: FIX18992628
Manufacturer Part Number: F464

It is a genuine item which is supplied by the original equipment manufacturer for use with DeVilbiss and Porter Cable pressure washers. This is an identical replacement for a missing or damaged hardware which was originally installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality component is sold individually.

Oil Seal Kit

$52.80

Fix Number: FIX9964110
Manufacturer Part Number: 5140117-50

Valve Kit

$55.12

Fix Number: FIX9964106
Manufacturer Part Number: 5140117-46

This part is sourced from DeWalt and is a manufacturer approved replacement part for DeWalt Pressure washers. For full compatibility, please see the "Model Cross Reference List" below. This valve kit contains a complete set of check valves (3 inner valves and 3 outer valves), as well as the rubber o-rings needed for installation. These valves fit in the pump and work together to pressurize the water. If your pressure washer is unable to build pressure or has low pressure, it may be time to replace the valves. These valves are made out of plastic and metal, and each valve is approximately 0.5" in length. These valves are also referred to as Check Valves. There are 6 valves in each kit, which is enough to replace all the valves on your pressure washer.

Fixes these symptoms

No or low pressure
See more...

Installation Instructions

Chance from HOUSTON, MN

Pressure washer would build minimal pressure.

Started by running water to the pressure washer and not running the motor. Started the motor and minimal pressure increase from wand but an increase. Removed the valves which were seated/stuck. Broke 4 of the 6 in order to get them out so really could not see if a spring was broke or damaged. Replaced all 6 valves and it now works great. The most difficult part of the job was removing the valves without damaging the brass. Read more...

Watch the install video

Pneumatic Wheel

$56.83

Fix Number: FIX12522442
Manufacturer Part Number: N003522

This item has been sourced from the original manufacturer to be used with pressure washers and air compressors from Porter Cable, DeWalt, DeVilbiss, Black & Decker, and Delta. The air-filled wheel attaches to the axle or frame and is used to easily move the machine. This item is sold as an individual replacement part.

Lance

$48.80

Fix Number: FIX9963876
Manufacturer Part Number: 5140095-94

The lance attaches to the gun. This is an authentic DeWALT replacement part that is sourced from the original manufacturer for use with pressure washers. This part is made of metal and sold individually. When replacing this item no tools should be needed. It may become bent or broken and will need to be replaced.

Valve Thermal Relief

$56.38

Fix Number: FIX9963872
Manufacturer Part Number: 5140095-85

This is a genuine OEM replacement part that has been sourced directly from DeWalt. The thermal relief valve helps you operate you pressure washer safely. This part regulates the amount of pressure in the line at any given time. When the pressure in the line builds to a certain level the relief valve is pushed open and allows excess pressure to escape, rather than allowing it to build-up in the line. This replacement part is a safety mechanism that helps prevent serious damage to you or your equipment. This thermal valve relief is made of metal, and the threads have sealant on them to ensure airtight connection. The thermal valve relief is sold individually. You will need basic hand tools for installation.

HOSE PULSE 3/8 12 22

$59.79

Fix Number: FIX18990705
Manufacturer Part Number: A16746

This part is an OEM from Porter Cable. The hose pulse 3/8 12 22 is constructed of metal and plastic parts, and has been designed for use in many pressure washers. This item is fastened onto the elbow 3/8, and is used to reduce the pulse pressure in the pump. This part is sold individually. A wrench is helpful in making the repair.

Black and Decker Pressure Washer Parts

Popular Black and Decker Pressure Washer Parts

Installation Instructions

Black and Decker Pressure Washer Appliance Types

Related Black and Decker Pressure Washer Parts

Popular Black and Decker Pressure Washer Models

Black and Decker Pressure Washer Parts

Start With Your Model Number

Popular Black and Decker Pressure Washer Parts

Installation Instructions

Black and Decker Pressure Washer Appliance Types

Related Black and Decker Pressure Washer Parts

Popular Black and Decker Pressure Washer Models