Ridgid Pipe Tools Wheels and Rollers

Fix Number

FIX10095703

Manufacturer Part Number

33185

This Authentic Manufacturer Sourced replacement part is designed for use with Ridgid Tubing Cutters. It is precision-machined from high-grade steel and engineered for long life and maximum cutting accuracy. Designed to cut Aluminum and Copper. To replace this part you will need a Screwdriver. • Loosen the Screw that holds the Cutter Wheel • Remove the Old Cutter • Make sure the Cutter Body is clean • Place a New Cutter Wheel in place and secure it with a Screw.

Fix Number

FIX10095687

Manufacturer Part Number

33100

This is a genuine Ridgid replacement part used in compatible bolt threading machines. The thin cutter wheel attaches to the cutter frame and helps to make cuts in pipes. It is made out of metal and will require replacing if it breaks. This item is priced individually.

Fix Number

FIX10095690

Manufacturer Part Number

33125

It is an authentic OEM component which is made for Ridgid pipe and bolt threading machines. This special cutter wheel is designed to cut steel and ductile iron. A dull or a damaged cutter wheel will increase required force, produce poor results and increase the risk of injury. On a monthly basis (or more often if needed) lubricate all exposed moving parts (such as carriage rails, cutter wheels, cutter feed screw, jaw inserts and pivot points) with a light lubricating oil. Wipe any excess oil from exposed surfaces. It provides an identical replacement for a faulty or a missing component that was installed on a new unit. Note, this high-quality cutter is made of durable metal and is sold individually.

Fix Number

FIX10097210

Manufacturer Part Number

44185

It is a genuine component which is supplied by the original equipment manufacturer for Ridgid pipe and bolt threading machines. This special cutter wheel is designed to cut steel and ductile iron. A dull or a damaged cutter wheel will increase required force, produce poor results and increase the risk of injury. On a monthly basis (or more often if needed) lubricate all exposed moving parts (such as carriage rails, cutter wheels, cutter feed screw, jaw inserts and pivot points) with a light lubricating oil. Wipe any excess oil from exposed surfaces. It provides an identical replacement for a faulty or a missing component that was installed on a new unit. Note, this high-quality cutter is made of durable metal and is sold individually.

Fix Number

FIX10095688

Manufacturer Part Number

33105

Fix Number

FIX10095698

Manufacturer Part Number

33170

This is a genuine Ridgid replacement part that has been sourced from the original manufacturer to be used with internal tubing cutters. The metal cutter wheel attaches to the roller cage and is used to cut through the tubing. The cutter wheel is sold as an individual replacement part.

Fix Number

FIX10095699

Manufacturer Part Number

33175

The cutter wheel attaches to the spring and arbor. This is an OEM part sourced directly from the manufacturer and used in Ridgid copper cutting prep machines and tubing cutters. It is made of metal and is sold individually. A screwdriver and a set of pliers might be necessary during the installation of this item. Over time this part may break or become dull and will need to be replaced.

Fix Number

FIX10095697

Manufacturer Part Number

33165

The heavy duty cutter wheel attaches to the frame assembly and helps to make cuts in pipes. It is sold individually and is a genuine OEM sourced part which is specially designed for use with Ridgid tubing cutters. The cutter wheel is made out of metal and will require replacing if it breaks.

Fix Number

FIX10096142

Manufacturer Part Number

34785

Ridgid 34785 Replacement Package of 2 Rolls for the 1224 Threading Machine NPT 115V3-S Pipe Cutter (Capacity: 1" - 3")4-S Pipe Cutter (Capacity: 2" - 4")6-S Pipe Cutter (Capacity: 4" - 6").

Fix Number

FIX10104148

Manufacturer Part Number

93620

The drive roller goes between the clutch adjusting nut and the wave washer. It is a genuine Ridgid replacement part for use in drain cleaners. This item is made of metal and hard rubber and is available as an individual replacement. If this part becomes broken it will need to be replaced and may require a screwdriver during the installation.