OEM Craftsman Paint Sprayer Parts & Accessories

Brush Holder Set

$78.54

Fix Number: FIX10097343
Manufacturer Part Number: 45025

This is a genuine OEM sourced replacement brush holder set which is specially designed for use with Ridgid pipe and bolt threading machines. The purpose of these items is to secure carbon brushes around the armature to ensure proper conductivity. These are high-quality component which are made of durable plastic with metal and they are sold in a pack of two., please note the carbon brushes are sold separately.

Asme Safety Valve

$33.09

Fix Number: FIX10053434
Manufacturer Part Number: V-215100AV

This ASME safety valve is constructed of high-qualty metal, and is made for use with many air compressor models. Fastened to the manifold, the safety valve diminishes air pressure when the pump is not shut off at the proper setting. This important component is sold individually. A screwdriver, adjustable wrench and a pair of pliers are often necessary for the removal and replacement. Please refer to the specific manual for additional repair information.

Filter Vt Hv Head

$10.28

Fix Number: FIX10053882
Manufacturer Part Number: VT013001AV

This is an authentic Craftsman replacement part, sourced from the original manufacturer for use with air compressors. The special filter is commonly used to prevent dust or debris from entering the cylinder head assembly. This filter is available as an individual replacement part, please see model diagram for associative parts.

GASKET

$6.51

Fix Number: FIX18997463
Manufacturer Part Number: SG5-0040

This is an authentic OEM part that has been sourced directly from DeVilbiss. This gasket helps seal the high pressure tank of paint. Over time the seal might wear down, or become less effective. It is important to replace the gasket when this happens so the paint sprayers tank remains pressurized. This will ensure the paint will flow through the gun and out of the nozzle at the appropriate rate, it helps maintain the appropriate paint to air ratio, and leads to an even coat of paint. This gasket is made of rubber, and it is sold individually.

Bearing Cap Gasket

$10.28

Fix Number: FIX10054427
Manufacturer Part Number: XA003200AV

This is an authentic part is sourced directly from the original equipment manufacturer. The bearing cap gasket is commonly found in Craftsman air compressors. The purpose of this component is to provide a tight seal between connected parts. Please check the appropriate diagrams of your model for the exact location and the correct application of this part. Note, one durable cap gasket is included.

Poly V Belt

$40.65

Fix Number: FIX10043214
Manufacturer Part Number: BT003100AV

This is an authentic OEM sourced item that is specially designed for use with Craftsman air compressors. It is an identical replacement for a missing or worn belt that drives the unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality item is made of durable rubber and is sold individually.

Handle

$128.28

★★★★★

1 Review

Fix Number: FIX10047005
Manufacturer Part Number: HL001801BH

This handle is an original replacement part supplied by the manufacturer. It is commonly used in Campbell Hausfeld air compressors. It is compatible with over 150 models. This handle is attached to the top of the tank (part AR040500CG). A screwdriver is needed to remove and replace the screws that secure this part.

Compression Connector Assembly

$36.25

Fix Number: FIX10050905
Manufacturer Part Number: ST018300AV

This is a genuine OEM part. The compression connector assembly is made by Campbell Hausfeld, and is compatible with many air compressor devices. The metal component secures the manifold to the compressor tank. This item is sold individually. A screwdriver and a pair of pliers are often helpful in making the replacement.

$7.31

Fix Number: FIX10097347
Manufacturer Part Number: 45050

It is a genuine item that is supplied by the original manufacturer for use with Ridgid self-opening die heads. This is a special pin that is utilized to secure the lock screw. Over time it may wear out or get damaged eventually requiring a replacement to ensure the correct repair procedure. Keep in mind this high-quality pin is made of durable metal and is sold as an individual item. Pliers might be needed to secure or remove this hardware.

Flapper Valv

$18.27

★★★★★

1 Review

Fix Number: FIX10053848
Manufacturer Part Number: VS001800AV

This is an authentic part that is supplied directly from the original equipment manufacturer for use with Craftsman Air Compressors. The exhaust flapper valve attaches on the valve plate under the cylinder head. The most common reasons for replacing the flapper valve is if there is poor performance, or the air leaks out of the intake air filter while the unit is running, damaged/sticking valves is a common issue when you have low compression, and can also cause the motor/engine to stall and too much pressure in the pump's crankcase. This part is sold individually. Here is a list of tools that are needed to install the flapper valve are a screwdriver, socket wrench, and a wrench.

Craftsman Paint Sprayer Parts

Popular Craftsman Paint Sprayer Parts

Craftsman Paint Sprayer Appliance Types

Related Craftsman Paint Sprayer Parts

Popular Craftsman Paint Sprayer Models

Craftsman Paint Sprayer Parts

Start With Your Model Number

Popular Craftsman Paint Sprayer Parts

Craftsman Paint Sprayer Appliance Types

Related Craftsman Paint Sprayer Parts

Popular Craftsman Paint Sprayer Models