Shop OEM Nailer Seals and Gaskets

O RING

$6.25

Fix Number: FIX12420389
Manufacturer Part Number: 180448

This is an OEM replacement O-ring for a nailer, sold individually. This O-ring is what seals the cylinder to the housing of the gun and creates separation between the upper and lower air chambers. Due to its rubber material, over time, it can wear. For this repair you will need to remove the cap, disassemble the head valve, remove the spring, and remove the old O-ring. Apply some lubrication to the new O-ring and place it on the valve.

Seal

$9.40

★★★★★

1 Review

Fix Number: FIX10071653
Manufacturer Part Number: BC0472

If you are experiencing air leaks coming from the firing valve of your nailer, you may be in need of a new seal. This rubber seal is sold individually and is sourced right from the original manufacturer. The firing valve seal can start to become brittle and crack, leading to air leaks and poor performance. To replace this part, you will need a hex key/Allen wrench and pliers.

O-RING

$6.55

★★★★★

1 Review

Fix Number: FIX18990553
Manufacturer Part Number: A00104

This is an O-ring for a nailer. It is sold individually and is made of a clear rubber material. This O-ring sits between the HD, valve piston and gasket head, which can be accessed by removing the housing cap. O-rings are designed to contain a large amount of pressure by creating a seal between parts. This part is prone to wear over time and will need to be replaced if damaged.

Seal

$6.25

Fix Number: FIX10071654
Manufacturer Part Number: BC0473

This replacement seal is a high quality OEM sourced item that is specially designed for Senco nailers. It is used to provide a tight seal between the cap assembly and the firing valve. Please note this part is made from durable hard rubber material and it is sold individually. Replacing this seal you will need a hex key which is also called an allen wrench.

SEAL RING

$6.25

Fix Number: FIX12489255
Manufacturer Part Number: P2320006600

This is a genuine replacement seal ring supplied directly from original equipment manufacturer. It is a commonly used item on Bostitch nailers. This plastic part fits over the piston to provide an air tight seal. Over time seals would deteriorate and crack allowing for air leaks. Please note this item is made out of rubber material and it is sold individually.

Seal

$6.25

Fix Number: FIX10074415
Manufacturer Part Number: LB0018

This is a genuine OEM seal for a nailer. It is located on the valve assembly and provides an air-tight seal. If you notice the sound of air leaking, it could be due to a damaged seal. Due to its rubber material, it is prone to wearing, and cracking, so will need to be replaced from time to time. This seal is sold individually.

SEAL

$15.50

Fix Number: FIX18987982
Manufacturer Part Number: 904689

This is a single head valve seal for a nailer. This part is installed in the top of the cylinder and creates a seal for the head valve. If air is leaking from the top of the nail gun, it could be due to a damaged head valve seal. To access this part, you will need to remove the top cap. Gaskets such as this should only be used once for a secure seal, so if you have removed this part, it will need to be replaced.

O-RING

$6.25

Fix Number: FIX18997335
Manufacturer Part Number: S06P001500

This is a Genuine Manufacturer Sourced replacement part designed for Nailers/Staplers. This O-Ring provides an Air-Tight Seal for the Valve Piston. Over time this O-Ring will shrink, become brittle and crack allowing for air leaks. At that time it should be replaced. It is made out of Rubber and it is Sold Individually. Replacing this item you would need Hex Key/Allen Wrench and Pliers to replace this item.

Watch the install video

Seal

$6.25

Fix Number: FIX10074423
Manufacturer Part Number: LB0030

Genuine Senco replacement part, this part is sold individually. The purpose of this part is to create a seal so air does not leak from the gun. When replacing this Seal it is advised to inspect all of the other Seals and O-Rings for wear.

Watch the install video

SEAL

$6.25

Fix Number: FIX12425943
Manufacturer Part Number: 180446

This is an authentic Craftsman replacement part that has been sourced from the original manufacturer to be used with pneumatic nailers and staplers. The seal is used to prevent leaks between the head valve and the end cap spacer. This item is available as an individual replacement part.

Nailer Seals and Gaskets

Popular Nailer Seals and Gaskets

Nailer Seal or Gasket Brands

Nailer Seals and Gaskets

Start With Your Model Number

Popular Nailer Seals and Gaskets

Nailer Seal or Gasket Brands