Official Senco Nailer Seals and Gaskets

Seal

$9.79

Fix Number: FIX10071653
Manufacturer Part Number: BC0472

If you are experiencing air leaks coming from the firing valve of your nailer, you may be in need of a new seal. This rubber seal is sold individually and is sourced right from the original manufacturer. The firing valve seal can start to become brittle and crack, leading to air leaks and poor performance. To replace this part, you will need a hex key/Allen wrench and pliers.

Seal

$6.51

Fix Number: FIX10071654
Manufacturer Part Number: BC0473

This replacement seal is a high quality OEM sourced item that is specially designed for Senco nailers. It is used to provide a tight seal between the cap assembly and the firing valve. Please note this part is made from durable hard rubber material and it is sold individually. Replacing this seal you will need a hex key which is also called an allen wrench.

Seal

$6.51

Fix Number: FIX10074415
Manufacturer Part Number: LB0018

This is a genuine OEM seal for a nailer. It is located on the valve assembly and provides an air-tight seal. If you notice the sound of air leaking, it could be due to a damaged seal. Due to its rubber material, it is prone to wearing, and cracking, so will need to be replaced from time to time. This seal is sold individually.

Watch the install video

Seal

$6.51

Fix Number: FIX10074423
Manufacturer Part Number: LB0030

Genuine Senco replacement part, this part is sold individually. The purpose of this part is to create a seal so air does not leak from the gun. When replacing this Seal it is advised to inspect all of the other Seals and O-Rings for wear.

Seal

$16.35

Fix Number: FIX10074734
Manufacturer Part Number: LB5046

This is a Genuine OEM replacement part for use with Senco Nailers/Staplers. This item is made out of Rubber Material and it is Sold Individually. The purpose of this part is to create a seal so air does not leak from the gun. When replacing this Seal it is advised to inspect all of the other Seals and O-Rings for wear. When replacing this item you would need an Allen Wrench Set and Pliers.

Seal

$6.51

Fix Number: FIX10074409
Manufacturer Part Number: LB0012

This is an Authentic OEM replacement part for use with Senco Nailers/Staplers. This item is made out of Rubber and it is Sold Individually. The purpose of this part is to create a seal so air does not leak from the gun. When replacing this Seal it is advised to inspect all of the other Seals and O-Rings for wear. When replacing this item you would need an Allen Wrench Set and Pliers.

Seal

$11.98

Fix Number: FIX10071864
Manufacturer Part Number: BF0203

This is a Genuine OEM replacement part for use with Senco Nailers. This item is made out of Rubber Material and it is Sold Individually. The purpose of this part is to create a seal so air does not leak from the gun. When replacing this Seal it is advised to inspect all of the other Seals and O-Rings for wear. When replacing this item you would need an Allen Wrench Set and a Screwdriver.

Seal

$26.19

Fix Number: FIX10074723
Manufacturer Part Number: LB5005

This is an authentic OEM replacement part that has been sourced directly from Senco. This firing valve seal is in the assembly of nailers, staplers, and electrics drills. This rubber seal fits into a grove on the cylinder and it helps create an air-tight seal. Due to friction over time this seal will wear down and break apart, at which point it is ineffective and needs to be replaced. This seal is sold individually.

Seal

$17.44

Fix Number: FIX10074715
Manufacturer Part Number: LB3505

This is a manufacturer sourced replacement part designed for use with Senco staplers. This is one of the seals for the valve. Over time it will shrink, become brittle and crack allowing for air leaks. At that time it should be replaced. It is made out of rubber material and it is sold individually. Replacing this item you would need hex key/allen wrench and pliers to replace this item.

Seal

$6.51

Fix Number: FIX10074437
Manufacturer Part Number: LB0057

This is a Genuine OEM replacement part for use with Senco Nailers/Staplers. This item is made out of Rubber Material and it is Sold Individually. The purpose of this part is to create a seal so air does not leak from the gun. When replacing this Seal it is advised to inspect all of the other Seals and O-Rings for wear. When replacing this item you would need an Allen Wrench Set and Pliers.

Senco Nailer Seals and Gaskets

Popular Senco Nailer Seals and Gaskets

Related Senco Nailer Parts

Senco Nailer Seals and Gaskets

Start With Your Model Number

Popular Senco Nailer Seals and Gaskets

Related Senco Nailer Parts