Milwaukee Hammer Drill Power Cords

Fix Number

FIX10131782

Manufacturer Part Number

44-76-0210

This cord protector is created to slide onto your cord and fit tightly at the end to protect the base of the cord from getting damaged. If the wires are exposed it can a be a safety hazard, so make sure to replace your cord protector if damaged. Refer to the manual provided by the manufacturer for further installation instructions.

Fix Number

FIX10134042

Manufacturer Part Number

48-76-4008

This Milwaukee Quik-Lok® cord is a genuine OEM replacement part, it is sold individually. This is a three wire grounded 8 foot cord for fast field replacement of a damaged cord. Made of premium grade Hi-Flex wire the cord is quickly removed and attached to Milwaukee tools with the Quik-Lok® cord feature. To change a damaged cord simply turn the collar at the top of the cord counter clockwise to loosen the nut and pull down on the cord to remove. To re-attach a new cord, line up the pins in the end of the tool with the pin receptacles in the end of the cord, push together and turn the collar clockwise to lock in place. The Cord has a 5-15P NEMA type plug.

★★★★★

★★★★★

1 Review

Fix Number

FIX10122719

Manufacturer Part Number

22-64-0665

This is an genuine OEM approved replacement part designed for use with Milwaukee Power Tools. This item is Sold Individually. Due to the use or other factors a cord can crack or get damaged otherwise. It is important to replace a damaged cord before continuing to use your equipment. It is made out of Rubber and Metal. This cord comes together with Protector/Grommet.

Fix Number

FIX10122789

Manufacturer Part Number

22-64-1832

This power cord is a genuine Milwaukee replacement part. It is used on a variety of their power tools. This cord plugs into a regular outlet delivering the power to the unit. If the cord is bent or damaged otherwise it is important to replace it immediately. Please note that the cord protector/sleeve is sold separately. Replacing power cord is a simple job that should only require a screwdriver. • Remove the housing • Disconnect the old cord wires • Pull out the cord through the sleeve • Remove old cord and secure new one in place • Reassemble test the tool

Fix Number

FIX10122697

Manufacturer Part Number

22-64-0405

This genuine OEM part is manufactured by Milwaukee. It is compatible with a variety of their handheld power tools. This one (1) piece set includes plug, cord, and cord protector. A cord protector prevents damage to the cord by reducing strain put on the point of connection between wires and machine. Replace this set when any component is damaged.

Fix Number

FIX10122861

Manufacturer Part Number

22-64-5316

This is an authentic manufacturer made replacement part which is specially designed for use with Milwaukee rotary hammers. When plugged in, the power cord transfers power to the unit. This part is made of flexible plastic and metal, it is also sold individually, however it dose include the strain relief already assembled. For installation, you will need a screwdriver to remove any covers or shrouds, and a pair of needle nose pliers to aid you.

Fix Number

FIX10122864

Manufacturer Part Number

22-64-5378

Fix Number

FIX10122707

Manufacturer Part Number

22-64-0515

This is an authentic replacement part manufactured for use with Bosch electric hammer drills. The two wire cord set is used to provide electricity to the tool's motor. This cordset is available as an individual replacement part, please see model diagram for associative parts.

Fix Number

FIX10122743

Manufacturer Part Number

22-64-0880

This is an authentic Milwaukee replacement part that is sourced from the original manufacturer for use with hammer drills. The three wire cord is covered in a durable sleeve and is used to transfer electricity from the outlet to the switch assembly. This item is available as an individual replacement part, please note the cord protector is available separately.

Fix Number

FIX10122675

Manufacturer Part Number

22-64-0216

This is an authentic Milwaukee replacement part that has been sourced from the original manufacturer to be used with hammer drills. This two wire cord is encased in a durable jacket and is used to relay electricity from the outlet to the switch. This item is available as an individual replacement part.