Makita Hammer Drill Switches

Fix Number

FIX10153680

Manufacturer Part Number

651922-3

This replacement switch is specially made for use on Makita power tools. Switches are a commonly replaced item in power tools. They play a key role by controlling on/off function of a tool. Because switches use mechanical internals, they will degrade and wear out over time, eventually requiring replacement. To replace this switch you would need a screwdriver. • First make sure the tools is not plugged in • Remove housing screws • Disconnect wires from the old switch • Remove it from the housing • Place the new switch in the housing • Reconnect wires to it • Reassemble and test the unit

Fix Number

FIX11885064

Manufacturer Part Number

650747-2

This is a Genuine Manufacturer Sourced replacement part used on certain Makita Drills. This is a Plastic Switch with Wire Leads. Switch handles on/off function of the tool. They also have a role in electric breaking, they can momentarily reverse electrical polarity. Because switches use mechanical internals, they will degrade and wear out over time, eventually needing replacement.

Fix Number

FIX16391189

Manufacturer Part Number

651083-9

This replacement trigger switch is designed to restore smooth, reliable power control on cordless power tools by providing consistent on-off and variable-speed operation. Built for durability and a precise internal fit, it helps resolve issues such as intermittent power or non-responsive triggers. Ideal for replacing a worn or faulty switch, it restores dependable performance and safe, controlled tool operation.

Fix Number

FIX10153485

Manufacturer Part Number

650508-0

Genuine manufacturer approved replacement switch used on Makita rotary hammers. It is the part of the tool handling on/off operations. Since switches have moving mechanical parts, they will eventually wear out and will require a replacement. Switch has a plastic body and it is sold individually. To replace this switch you would need a screwdriver. • Remove screws used to hold two pieces of housing set together • Disconnect wires from the old switch and remove it from the housing • Place the new switch in the housing and connect wires to it • Reassemble the housing

Fix Number

FIX10153701

Manufacturer Part Number

651986-7

This Trigger switch has internal terminals, a locking mechanism and a forward/reverse lever for the switch. This authentic Makita replacement part is sold individually. rnrnSwitches are commonly replaced parts in power tools, handling all on/off and variable speed operations. They also have a role in electric breaking; they can momentarily reverse electrical polarity. Because switches use mechanical internals, they will degrade and wear out over time, eventually requiring replacement. Some common signs of a broken or failing switch are:rn • The tool will not start when you use the switch, or it requires multiple tries to turn on, until eventually it refuses to start at all.rn • The variable speed function and electric braking aren't working properly.

Fix Number

FIX16609657

Manufacturer Part Number

632J77-3

Fix Number

FIX10153494

Manufacturer Part Number

650524-2

SINGLE W/LOCK VAR/REV

Fix Number

FIX10153473

Manufacturer Part Number

650207-4

This is a genuine manufacturer-approved replacement switch which is commonly used on Makita hammer drills. It is the part of the tool handling on/off operations, since switches have moving mechanical parts, they will eventually wear out and may begin to fail require a replacement. Please note this high-quality switch has a durable plastic body and it is sold individually.

Fix Number

FIX10153630

Manufacturer Part Number

651470-2

This Toggle switch has 4 internal terminals. This authentic Makita replacement part is sold individually. Switches are commonly replaced parts in power tools, handling all on/off and variable speed operations. They also have a role in electric breaking; they can momentarily reverse electrical polarity. Because switches use mechanical internals, they will degrade and wear out over time, eventually requiring replacement. Some common signs of a broken or failing switch are: • The tool will not start when you use the switch, or it requires multiple tries to turn on, until eventually it refuses to start at all. • The variable speed function and electric braking aren't working properly.

Fix Number

FIX10153522

Manufacturer Part Number

650591-7

This is a genuine Makita replacement part that has been sourced from the original manufacturer to be used with rotary hammers. The switch fits into the housing assembly and is used to relay electricity from the power cord to the motor. This item is available as an individual replacement part.