Official DeWALT Hammer Drill Bearings

Miter Saw Ball Bearing

$17.98

Fix Number: FIX10188573
Manufacturer Part Number: N127530

This Ball Bearing is sealed on both sides. It is a genuine replacement part and is sold individually. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the tool and allows it to run smoothly. Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement.

Fixes these symptoms

Grinding or squealing sound
See more...

Watch the install video

Bearing

$6.25

Fix Number: FIX10188435
Manufacturer Part Number: N110359

This authentic ball bearing is sold individually. It can be used in a variety of differently model types, such as miter saws, circular saws, table saws, and angle grinders. This ball bearing is sealed on both sides. Its job is to minimize friction between rotating parts. The armature rotates at a very fast rate, so after years of use, it is normal for the bearings to wear.

Watch the install video

Ball Bearing

$22.60

Fix Number: FIX16680871
Manufacturer Part Number: 605040-20

This Ball Bearing has metal shielding on both sides. This is a genuine Dewalt replacement part that is sold individually. • Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the tool and allows it to run smoothly. • Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement.

Watch the install video

Ball Bearing

$19.48

★★★★★

1 Review

Fix Number: FIX10169632
Manufacturer Part Number: 330003-64

This is a ball bearing for your power tools. It is used in a variety of machines for rotary motion. The bearings support your tools by lowering the friction, which allows easy rotation of moving parts. Depending on how often you use your tool the bearings are a commonly replaced part. This is because they will experience most of the pressure, heat, and vibrations.

Ball Bearing

$9.88

Fix Number: FIX11927722
Manufacturer Part Number: 605040-05

This is an OEM replacement part used on on a variety of electric power tools. This is a standard ball bearing which is has multiple applications based on your tool. Bearings are designed to reduce friction between two rotating parts. Since bearings experience constant wear from pressure, heat and friction, eventually they would need to be replaced. This is sealed metal bearing and it is sold individually.

NEEDLE BEARING

$6.25

Fix Number: FIX12396288
Manufacturer Part Number: 093128-00

Included in part number 611971-00

Bearing, Ball

$15.25

Fix Number: FIX10180910
Manufacturer Part Number: 605040-25

This is a Ball Bearing that has seals on both sides. This is a genuine DeWalt replacement part that is sold individually. rnrn • Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the tool and allows it to run smoothly. rn • Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement.

Watch the install video

330003-60

$6.25

Fix Number: FIX10169630
Manufacturer Part Number: 330003-60

This is a bearing, and it is used in various power tools. It is meant to reduce tension between the moving parts within the tool. This bearing has a 1 inch outer diameter, less than 1/4-inch inner diameter, and green walls.

Watch the install video

Ball Bearing

$22.63

Fix Number: FIX10180905
Manufacturer Part Number: 605040-02

This replacement item is commonly used on angle grinders and hammer drills. It is sourced from original equipment manufacturer. The purpose of a ball bearing is to reduce friction between two connected rotating parts. Bearings are constantly under heavy pressure. Over time they would wear out and would need to be replaced. This item is sold individually.

Bushing

$6.25

Fix Number: FIX10174060
Manufacturer Part Number: 487240-00

This is a genuine manufacturer-approved part which is specially designed for use with DeWALT demolition hammers. It is an identical replacement for a missing or a faulty bushing that was installed on a new unit. The purpose of this bushing is to secure the spring, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality component is made of durable material and is sold individually.

DeWALT Hammer Drill Bearings

Popular DeWALT Hammer Drill Bearings

Related DeWALT Hammer Drill Parts

DeWALT Hammer Drill Bearings

Start With Your Model Number

Popular DeWALT Hammer Drill Bearings

Related DeWALT Hammer Drill Parts