OEM Troy-Bilt Generator Parts & Accessories

Fuel Gauge Cap

$51.65

Fix Number: FIX9314364
Manufacturer Part Number: B4363GS

This is an authentic OEM sourced part which is designed for Briggs and Stratton and Snapper generators. It is an important part that keeps the fuel in the tank and the gauge shows a user the level of gas in the tank. Over time it may wear out or get damaged eventually requiring a replacement. Make sure to refer to the owners manual and the appropriate diagrams of your model for the correct application of this component. This high-quality cap is made of durable materials and is sold as an individual item. Replacing it is a simple task that does not require any tools, simply unscrew the old one and secure the new one.

Support-leg

$37.83

Fix Number: FIX9940365
Manufacturer Part Number: 312510GS

Keep a portable generator properly supported with this durable replacement leg. The leg helps stabilize the unit while the engine is running and reduces unwanted movement on a firm, level surface. Replacement may be needed when the original leg is damaged, loose, or no longer holds the frame evenly. The item is sold individually and can be installed with a basic wrench set. Review the equipment diagram before installation because mounting hardware may be listed separately. For safe service, shut down the generator, allow hot areas to cool, and place the unit on a solid surface before removing the old leg.

Washer, 5/16

$6.51

Fix Number: FIX9999626
Manufacturer Part Number: 703350

This is a washer for various lawn and garden equipment. It is a flat washer and requires a 5/16-inch bolt size. Washers are positioned under the head of a nut or bolt to strengthen the connection of two or more parts.

Assembly, Holder, Brush

$30.16

Fix Number: FIX9063496
Manufacturer Part Number: 66386GS

This is a brush holder assembly for your generator. Brushes conduct electric currents to provide power in the motor of your unit. The brush assembly is mounted into a bearing carrier, and is wired to connect the rotor to the stator. This assembly includes one plastic brush holder, and two carbon brushes. Lead wires and springs are attached.

Installation Instructions

William from South Prince George, VA

worn brushes

Removed end cover from generator, disconnected 2 wires from terminals, removed 2 bolts holding brush assembly. Reversed procedure with new part which was an exact fit. Encountered no problems. Read more...

18oz 30w 4 Cycle Oil

$9.58

Fix Number: FIX8817222
Manufacturer Part Number: 100005

This bottle of oil can be used in over 150 different types of machinery. It is most commonly used for pressure washers and generators from manufacturers such as Briggs and Stratton and Troy-Bilt. This detergent oil is warranty approved and specially compounded for warm weather use. Please note: it is important to avoid over filling your engine with oil.

Circuit Breaker

$144.29

Fix Number: FIX8911866
Manufacturer Part Number: 202031GS

This circuit breaker protects electrical systems by automatically cutting power during overloads or short circuits. It helps prevent damage to internal components and is replaced when power interruptions occur too frequently or reset fails.

Fuel Valve With Bushing

$24.05

Fix Number: FIX8911051
Manufacturer Part Number: 192980GS

This fuel valve with bushing fits a variety of outdoor equipment and allows the fuel to smoothly flow into the gas engine. The bushing part is pressed into the hole provided in the fuel tank and the fuel valve is pressed through the bushing to reach the inside of the fuel tank. If your fuel valve is broken then it best to replace it. Refer to the manual provided by the manufacterer for more information on the part and installation instructions. Safety tip: remember to wear gloves and be cautious when removing fuel from the tank.

Fixes these symptoms

Will Not Start
See more...

Voltage Regulator

$152.52

Fix Number: FIX9270265
Manufacturer Part Number: 205858GS

This authentic replacement part is specially designed for Briggs and Stratton generators. It is supplied from the original equipment manufacturer. This is an important component of the unit which regulates the voltage. Over time it may develop electrical or mechanical issues eventually requiring a replacement. This high-quality component is sold as an individual item. Make sure to refer to the owners manual and the diagrams of your model for the exact location and the correct application of this regulator. You will need a screwdriver and a wrench set to remove the housing in order to perform this repair.

Breaker, Circuit, 20a

$14.25

Fix Number: FIX9919917
Manufacturer Part Number: 209872GS

This part is an original part from Briggs & Stratton and Snapper for use in generators and welders. The circuit breaker goes inside the control box and helps to control electricity flow. A screwdriver, a set of pliers, a socket set, and a nutdriver may all be necessary during the installation of this part. Over time this part may wear out and will need to be replaced. This item is sold individually and is made of metal.

48oz 30 W 4 Cycle Oil

$30.29

Fix Number: FIX12606850
Manufacturer Part Number: 100028

Troy-Bilt Generator Parts

Popular Troy-Bilt Generator Parts

Installation Instructions

Troy-Bilt Generator Appliance Types

Popular Troy-Bilt Generator Models

Troy-Bilt Generator Parts

Start With Your Model Number

Popular Troy-Bilt Generator Parts

Installation Instructions

Troy-Bilt Generator Appliance Types

Popular Troy-Bilt Generator Models