OEM Porter Cable Generator Parts & Accessories

CLAMP FUEL .50

$6.51

Fix Number: FIX18992707
Manufacturer Part Number: GS-0227

This is an authentic Porter Cable replacement part that has been sourced from the original manufacturer to be used with air compressors from Porter Cable, DeVilbiss, and Black & Decker. The special clamp is used to secure the connections between fuel lines. This item is sold as an individual replacement part.

ISOLATOR VIBRATION 1

$12.19

Fix Number: FIX12521565
Manufacturer Part Number: GS-0033

This is a manufacturer approved isolator that is specially designed for use with electric generators. Its mounted between the motor and the frame to help minimize the vibrations caused by a running engine. One durable rubber isolator with a metal threaded shaft is included per order.

CAPACITOR

$34.43

Fix Number: FIX18992714
Manufacturer Part Number: GS-0748

This replacement part is specially designed for Porter Cable, DeWALT and DeVilbiss portable generators. The capacitor is a two-terminal electrical device used to store electrical energy in the form of an electric field. It provides leading current in AC circuits. In a DC circuit, the capacitor once charged with the applied voltage acts as an open switch. This is an identical replacement for a missing or a faulty component that was installed on a new unit. Please make sure to refer to the appropriate diagram of your model for the exact location and the correct repair procedure. Keep in mind this high-quality capacitor is sold individually.

BREAKER CIRCUIT 125/2

$23.30

Fix Number: FIX18991694
Manufacturer Part Number: D21508

The circuit breaker attaches to the washer. It is a genuine Porter Cable, DeWALT, and DeVilbiss replacement part for use in generators. This part is available individually and is made of metal and plastic. A set of pliers and a screwdriver might be helpful during the installation of this part. It will need to be replaced if it becomes broken or burnt out.

Button Snap .302 Dia

$6.51

Fix Number: FIX10186747
Manufacturer Part Number: D26863

This item is an original part from DeWALT, Porter Cable, DeVilbiss, Delta, and Bostitch for use in compressors. The button snap goes between the plug tube and the handle insert. You may need a set of pliers when replacing this item. Over time this part may break and will need to be replaced. It is made out of metal and is sold individually.

NUT .375-16 HEX WHIZ

$6.51

Fix Number: FIX18997472
Manufacturer Part Number: SSF-8111-ZN

Assembly Board Circuit I

$49.45

Fix Number: FIX18993231
Manufacturer Part Number: N080007

CAP FUEL TANK

$28.47

Fix Number: FIX18992708
Manufacturer Part Number: GS-0443

This high quality replacement cap is an authentic OEM sourced item that is designed for use with generators. It is designed to keep the fuel in the tank. This fuel cap is made from durable plastic and it is sold individually.

GROMMET, DRAIN COCK

$19.80

Fix Number: FIX18993263
Manufacturer Part Number: N103455

This part includes one drain grommet for a generator. The drain grommet is placed into the fuel tank of the unit to hold the fuel drain cock. It can be shut off to stop fuel from escaping or opened, allowing the fuel to make its way to the generator. This is a simple repair that does not require the use of tools.

TANK FUEL 7G SS

$280.00

Fix Number: FIX18997563
Manufacturer Part Number: Z-GS-0795

This genuine OEM fuel tank, also known as the gas tank, in your generator serves as the primary storage for the fuel that powers the engine to produce electricity. Typically positioned on the top of the frame assembly, this gas tank measures 22 inches in length and 18.5 inches in width, with mounting holes positioned 16 inches apart at the center and 3 inches apart from each end of the tank. To determine if the fuel tank needs replacement, inspect it for damage, corrosion, rust, or any signs of leaks. To replace the tank, start by removing the securing screws and disconnecting the gas line. Drain the remaining gas into a container. Remove the gas valve from the old tank and take out the tank. Install the new gas valve onto the new tank and securely place the new tank. After reconnecting the gas line and filling the tank with gas, conduct a thorough check to ensure there are no signs of leaks.

Porter Cable Generator Parts

Popular Porter Cable Generator Parts

Porter Cable Generator Appliance Types

Popular Porter Cable Generator Models

Porter Cable Generator Parts

Start With Your Model Number

Popular Porter Cable Generator Parts

Porter Cable Generator Appliance Types

Popular Porter Cable Generator Models