Generator Hardware

Fix Number

FIX18993263

Manufacturer Part Number

N103455

This part includes one drain grommet for a generator. The drain grommet is placed into the fuel tank of the unit to hold the fuel drain cock. It can be shut off to stop fuel from escaping or opened, allowing the fuel to make its way to the generator. This is a simple repair that does not require the use of tools.

Fix Number

FIX10021937

Manufacturer Part Number

90043-ZL8-000

This is a genuine component which is specially designed for use with Honda engines commonly installed on lawn and garden equipment. It is supplied directly from the original equipment manufacturer. This bolt-stud helps to mount the cover-fan and the pull-starter. Please make sure to refer to the appropriate diagrams of your model for the correct application of this hardware. Keep in mind this high-quality bolt-stud is made of durable metal and is sold individually. Replacing it is a simple task that should only require a wrench set to remove the old and secure the new.

Fix Number

FIX8925657

Manufacturer Part Number

222698S

This is a Genuine OEM replacement part used on a variety of Lawn and Garden equipment. The key helps to secure Flywheel in place. This is a Metal Key and it is Sold Individually. You would need Pliers to replace this item.

Fix Number

FIX9943619

Manufacturer Part Number

330019-13

Genuine OEM replacement part, this item is sold individually. This screw is used in various places in all of the tools listed below The most common use for this screw is to secure plastic housings together. It has a Torx T-20 head.

Fix Number

FIX10022425

Manufacturer Part Number

90201-ZM0-000

This is an authentically sourced 6mm hex flange nut for a small engine, sold independently. It is used to fasten the fan or starter housing to the main unit. To install this steel flange nut, you will need a wrench.

Fix Number

FIX9311087

Manufacturer Part Number

936-0119

If the shafts in the drive belt pulley assembly spin freely when they should remain locked together, this lock washer may need replacement. The silver metal washer maintains tension on the pulley shaft nut to help keep it secure, it measures 5/16 inches inside and 0.5 inches outside. Sold individually, you should confirm compatibility with your equipment before purchasing this washer.

Fix Number

FIX11897201

Manufacturer Part Number

95701-06010-00

Fix Number

FIX12517732

Manufacturer Part Number

D24721

This is an authentic OEM sourced part that is intended to be used with air compressors from Porter Cable, DeWalt, DeVilbiss, and Black & Decker. The isolators connect to the bottom of the frame of the feet of the tank and are used to support the compressor. These items also absorb vibration between the ground and the tank. The isolators are sold in a kit of three and the hardware is included.

Fix Number

FIX12466326

Manufacturer Part Number

91895680

This replacement screw is a genuine OEM sourced item commonly utilized on air compressors and pressure washers. It is a standard hardware which has multiple applications depending on the unit. Please make sure to check diagrams of your model for the correct location and used of this screw. This part is made from durable metal and it is sold individually. You will need a wrench to install or remove this hardware.

Fix Number

FIX10021484

Manufacturer Part Number

90004-ZL8-000

This bolt helps to secure muffler and carburetor to the short block. It is sourced from original equipment manufacturer for use with Honda small engines. Usually this bolt would need replacement if it is lost or has stripped threads. Please note this is a hex head bolt requiring a wrench for installation. It is sold individually.