OEM Milwaukee Impact Driver Parts & Accessories

O-ring

$6.51

Fix Number: FIX11877651
Manufacturer Part Number: 34-40-1885

This O-ring is attached to the anvil and backs up the tension ring. The O-ring minimizes how much the tension ring can compress when a socket is installed. O-rings are common wear parts that tend to harden and deteriorate over time due to their rubber material. A sign that this O-ring needs to be replaced is if the socket is no longer being held properly on the anvil. This manufacturer-approved part is sold individually.

Anvil Spring

$6.51

Fix Number: FIX11877704
Manufacturer Part Number: 40-50-0012

This is an authentic replacement part manufactured for use with Milwaukee impact drivers. The special anvil spring provides compression for the anvil and fits around the front of the anvil. This anvil spring comes with the anvil assembly part number 42-06-0020, please note this anvil spring is sold as an individual replacement part.

Friction Ring

$6.51

Fix Number: FIX11878410
Manufacturer Part Number: 44-90-1050

This is a metal friction ring, sold individually and used in impact wrenches as part of the anvil assembly. It measures roughly 3/8-Inches. When the socket is installed, the ring is compressed, and the tension that is created is what holds the socket securely in place. Over the lifetime of the tool, the ring can compress too small, and it will no longer fit properly in the socket, and will need to be replaced. For this repair you will need a pick to pry off the friction ring, a pair of needle nose pliers, retaining ring pliers, and a small screwdriver.

Machined Jaw Kit (Set Of 3)

$27.45

Fix Number: FIX17017029
Manufacturer Part Number: 30-55-0035

Machined Jaw Kit (Set Of 3)

Retaining Ring - Ext

$6.51

Fix Number: FIX10127118
Manufacturer Part Number: 34-60-0725

This external retaining ring, also known as a snap ring or circlip, is supplied by the original manufacturer for use in impact drivers. It helps to secure the collar in the front housing assembly. It should be replaced if it is lost, damaged, or no longer able to remain securely attached. To replace the retaining ring, disassemble the front housing assembly and pull out the ring. Position the new ring in its place and reassemble the housing. Each retaining ring is sold individually.

Sleeve And Ball Assembly

$12.05

★★★★★

1 Review

Fix Number: FIX11878467
Manufacturer Part Number: 45-22-0035

This precisionmachined assembly stabilizes mechanical movements within power tools. It withstands heavy use and replaces worn components that cause wobbling or inconsistent motion.

Watch the install video

Carbon Brush Kit

$18.88

Fix Number: FIX10120878
Manufacturer Part Number: 14-46-2012

This is a manufacturer-approved brush card assembly. The brush card is an easy way to service the brushes on your power tool. The assembly includes the brushes, the brush springs, holders, and the wire leads that go to the motor. This is a simple repair that will require you to release the spring tension on the brush and then secure the brush card in the appropriate position.

Collet

$8.19

Fix Number: FIX10129511
Manufacturer Part Number: 42-77-0400

This is an authentically sourced collet for rotary tools. This collet is for using bits with 1/8-Inch arbors. Over time and heavy use, the collet will wear and will require replacing. You may need a collet nut wrench (sold separately) to remove the collet nut.

Friction Ring

$7.65

Fix Number: FIX11878417
Manufacturer Part Number: 44-90-4530

This item is designed for use with Milwaukee impact wrenches. It is an authentic component which is supplied by the original equipment manufacturer. The friction ring is secured on the anvil and it helps to secure a socket. Over time it may wear out, get damaged or lost eventually requiring a replacement to ensure your tool functions properly. One durable metal friction ring is included. Check the owner's manual and the diagrams of your model for the exact location and the correct application of this component. Replacing it is a simple task that should only require a screwdriver and pliers.

Ball Steel 3.5 Mm

$6.51

Fix Number: FIX10116744
Manufacturer Part Number: 02-02-0170

This is an authentic Milwaukee replacement part that has been sourced from the original manufacturer to be used with impact drivers, wrenches, and screwdrivers. The steel ball is used to reduce friction between the anvil and the impact assembly. The steel ball is priced as a single item.

Milwaukee Impact Driver Parts

Popular Milwaukee Impact Driver Parts

Milwaukee Impact Driver Appliance Types

Related Milwaukee Impact Driver Parts

Popular Milwaukee Impact Driver Models

Milwaukee Impact Driver Parts

Start With Your Model Number

Popular Milwaukee Impact Driver Parts

Milwaukee Impact Driver Appliance Types

Related Milwaukee Impact Driver Parts

Popular Milwaukee Impact Driver Models