OEM Ridgid Hammer Drill Parts & Accessories

Chuck

$28.34

Fix Number: FIX10083843
Manufacturer Part Number: 670769004

This is an authentic OEM supplied replacement part made for Ridgid hammer drill. Its purpose is to hold drill bits. This is a keyless chuck allowing for fast and easy exchange of bits without any tools. Includes one (1) chuck per order. Please note the chuck screw is sold separately. To complete this repair you would need a screwdriver. • Remove screw that holds chuck • Replace old chuck with a new one • Reassemble and test the unit

CHUCK HT 1/2 W/LOCK

$19.72

Fix Number: FIX18698824
Manufacturer Part Number: 680301011

This is a genuine OEM sourced part which is specially designed for use with Ridgid drills. This chuck is used to secure a drill bit. If your drill's bit retention is suffering, the rotation feels stiff, or the chuck has seized up entirely, a new chuck should fix the problem. This high-quality 1/2 inch chuck is made of durable materials and is sold as an individual item. Please note, the screw to secure the chuck is sold separately.

Bearing Ball 626z Od19xid6x6

$6.25

Fix Number: FIX12123518
Manufacturer Part Number: 681761001

This genuine OEM sourced replacement ball bearing is a standard item which has multiple uses on a variety of power tools. Please check diagrams for proper application of this item. The bearing is specially designed to reduce friction between rotating parts. Over time it will wear out, at this point it should be replaced. This is a sealed metal bearing and it is sold individually.

ASSEMBLY BRUSH

$6.25

★★★★★

1 Review

Fix Number: FIX18693523
Manufacturer Part Number: 290069406

Genuine Ridgid replacement part, this item is sold individually. 2 of these Brushes are needed for a set. This Brush includes the Brush, Brush Holder, Brush Spring and plug in terminal. It is always best to replace both brushes, even if only one is worn. Worn brushes frequently are the cause behind a motor running poorly. Replacing brushes can fix a motor that's operating intermittently. New brushes can restore a motor's electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

CHUCK

$45.96

Fix Number: FIX18698430
Manufacturer Part Number: 670754010

The chuck is made of metal. This is a genuine Ridgid replacement part used in compatible hammer drills. It is priced as an individual replacement part. A screwdriver might be required during the replacement of this item. It may become broken and will need to be replaced.

CHUCK KEY 1/2 WEI

$2.99

Fix Number: FIX18699198
Manufacturer Part Number: 690176004

It is an authentic manufacturer-sourced replacement chuck key which is specially designed for use with Ridgid and Ryobi hammer drills. The purpose of the part is to allow a user to tighten and loosen the jaws of the chuck. This item is made of durable metal and it is sold individually.

ASSEMBLY CARBON BRUSH

$3.70

Fix Number: FIX18693561
Manufacturer Part Number: 290680011

ASSEMBLY MOTOR SPARE PARTS

$55.33

Fix Number: FIX18692986
Manufacturer Part Number: 206387001

Hook Belt

$6.25

Fix Number: FIX16389569
Manufacturer Part Number: 636181001

This is a genuine OEM sourced replacement part designed for use with nailers/staplers. It allows you to secure your tool to your belt for easy access. It is made out of metal and it is sold individually. Please note the screw used to secure it to the housing is sold separately.

GEAR CHANGE BUTTON

$2.99

Fix Number: FIX18694282
Manufacturer Part Number: 341453001

This is an OEM part sourced directly from the manufacturer. The gear switch is commonly found in drill/drivers and hammer drills from Ridgid. This part is made of high-quality plastic, and is placed in the top of the housing assembly to allow the user to adjust the speed of the drill. You may require a screwdriver when replacing this item. The gear switch is available as an individual replacement part.

Ridgid Hammer Drill Parts

Popular Ridgid Hammer Drill Parts

Ridgid Hammer Drill Appliance Types

Related Ridgid Hammer Drill Parts

Popular Ridgid Hammer Drill Models

Ridgid Hammer Drill Parts

Start With Your Model Number

Popular Ridgid Hammer Drill Parts

Ridgid Hammer Drill Appliance Types

Related Ridgid Hammer Drill Parts

Popular Ridgid Hammer Drill Models