OEM Ridgid Electric Drill Parts & Accessories

Relief Strain

$6.51

Fix Number: FIX10081942
Manufacturer Part Number: 551060001

Bearing Ball 608zz

$6.40

Fix Number: FIX11858686
Manufacturer Part Number: 680141022

Genuine Manufacturer Approved replacement part used on a variety of Power Tools. This Ball Bearing has multiple applications depending on your tool. This part is made out of Metal and it is Sold Individually. Ball Bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the tool and allows it to run smoothly. Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement. To replace this Bearing you would need a Screwdriver and a Set of Wrenches.

BRUSH ASSEMBLY

$6.51

Fix Number: FIX18693549
Manufacturer Part Number: 290255001

This replacement carbon brush is a genuine OEM sourced replacement part designed for use with a variety of power tools. This assembly includes one (1) carbon brush with a lead wire and a spring attached. Carbon brushes are a commonly replaced part on power tools. Due to normal use and friction brushes will gradually wear down and will require replacement. It is advised to replace both brushes at the same type. You would need a screwdriver to complete this job. • Make sure the unit is unplugged • First remove the brush caps • Take our old brushes and replace them with the new ones • Secure brush caps and test the tool

HANDLE AUXILIARY

$10.83

Fix Number: FIX18693987
Manufacturer Part Number: 305742001

This is an authentic Ridgid replacement part manufactured for a spade handle drill. The auxiliary handle is the front handle used for added leverage when operating the drill. The handle is threaded, so tools are not required to install. This auxiliary handle is sold as an individual replacement part.

CHUCK HT 1/2 5/8 -16 WEIDA

$17.55

Fix Number: FIX18698441
Manufacturer Part Number: 670799001

This is an authentic Ridgid replacement part manufactured for use with spade handle drills. The chuck is used to secure the drill bits. Chucks can wear down over time from normal use and may need to be replaced to continue using the drill. The chuck is sold individually, please note the retaining screw and chuck key are available separately.

ASSEMBLY BRUSH

$6.51

★★★★★

1 Review

Fix Number: FIX18693523
Manufacturer Part Number: 290069406

Genuine Ridgid replacement part, this item is sold individually. 2 of these Brushes are needed for a set. This Brush includes the Brush, Brush Holder, Brush Spring and plug in terminal. It is always best to replace both brushes, even if only one is worn. Worn brushes frequently are the cause behind a motor running poorly. Replacing brushes can fix a motor that's operating intermittently. New brushes can restore a motor's electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

Chuck Key Holder

$6.51

Fix Number: FIX10082022
Manufacturer Part Number: 560989001

This is an original replacement part manufactured for use with Ryobi hammer drills and 1/2" drills. The flexible chick key holder secures the chuck key for easy access to the key, and stores the key on the drill. The chuck key hold is available as an individual replacement part.

NOSEPIECE DRYWALL

$6.51

Fix Number: FIX18699243
Manufacturer Part Number: 690811008

This is an authentic HHHH replacement part, sourced from the original manufacturer for use with collated screwdrivers. The metal nose piece is used to actuate the screwdriver bit and is used with wood screws. The nose piece is available as an individual replacement part, please see model diagram for associative parts.

Chuck Key

$6.51

Fix Number: FIX10100371
Manufacturer Part Number: 672326001

This is an authentic replacement part manufactured for use with Ridgid spade handle drills and mud mixers. The chuck key is used to loosen and tighten the chuck when changing drill bits. This chuck key is available as an individual replacement part.

Bearing Ball 626z Od19xid6x6

$6.51

Fix Number: FIX12123518
Manufacturer Part Number: 681761001

This genuine OEM sourced replacement ball bearing is a standard item which has multiple uses on a variety of power tools. Please check diagrams for proper application of this item. The bearing is specially designed to reduce friction between rotating parts. Over time it will wear out, at this point it should be replaced. This is a sealed metal bearing and it is sold individually.

Ridgid Electric Drill Parts

Popular Ridgid Electric Drill Parts

Ridgid Electric Drill Appliance Types

Related Ridgid Electric Drill Parts

Popular Ridgid Electric Drill Models

Ridgid Electric Drill Parts

Start With Your Model Number

Popular Ridgid Electric Drill Parts

Ridgid Electric Drill Appliance Types

Related Ridgid Electric Drill Parts

Popular Ridgid Electric Drill Models