OEM Black and Decker Cordless Drill Parts | Expert DIY Repair Help & Fast Shipping | Fix.com

Popular Black and Decker Cordless Drill Parts

Bit Clip – Part Number: 148354-03
$2.99
Bit Clip
Fix Number FIX10166263
Manufacturer Part Number 148354-03
Fixes these symptoms
No Symptoms for this part
Charger – Part Number: 90592363-01
$16.36
Charger
Fix Number FIX12004687
Manufacturer Part Number 90592363-01
Fixes these symptoms
No Symptoms for this part
Cord Protector – Part Number: 330005-01
$6.02
Cord Protector
Fix Number FIX10169655
Manufacturer Part Number 330005-01
This is a cord protector, but it is also called a strain relief, and it is used with multiple power tools. This part is made of firm rubber to protect the cords from being pulled out or exposed, which would be a safety hazard. Over time the strain relief can develop cracks and break into pieces. This part is black and 4 inches long. The smallest end has a diameter of 0.5 inches. When completing this repair tuck in all wires to avoid pinching.
Fixes these symptoms
No Symptoms for this part
Installation Instructions
John from Hancock, MI says,

Did not come with grinding disc guard
While unit was unplugged I screwed clamp of guard around grinder....read more

Ball Bearing (608D) – Part Number: 330003-04
$13.09
Ball Bearing (608D)
Fix Number FIX10169608
Manufacturer Part Number 330003-04
This ball bearing fits various gardening and lawn tools such as, electric drills, hammers, saws, and sander polishers. Ball bearings are used to reduce friction between rotating parts. This happens when the ball bearings take the load and spin to distribute the weight evenly without causing friction. The ball bearing function can reduce wearing and allows your tool to run smoothly. Replacing this part regularly is important for the function of your tool. Refer to the manual provided by the manufacturer for further installation instructions and guidance.
Fixes these symptoms
No Symptoms for this part
Bit – Part Number: 419581-01
$2.99
Bit
Fix Number FIX9952951
Manufacturer Part Number 419581-01
Fixes these symptoms
No Symptoms for this part
Brush Spring – Part Number: 445860-00
$3.99
Brush Spring
(1)
Fix Number FIX10173420
Manufacturer Part Number 445860-00
This is a brush spring and it is used in a variety of power tools. The spring applies force to the motor brush inside the motor. This will keep the brush tight along the armature. If the brush has worn down it will create heat, and the spring will lose tension. If this happens, both parts will have to be replaced.
Fixes these symptoms
No Symptoms for this part
Charger – Part Number: 90640340
$20.36
Charger
Fix Number FIX12164184
Manufacturer Part Number 90640340
Genuine Manufacturer Sourced replacement part used on some Black and Decker Power Tools. This item is sold individually. Purchasing a charger will be less expensive than buying a new tool. Please note that a weak or defective battery can damage the charger. Weak batteries are batteries with bad cells. These type of batteries will not hold a charge. It will send a message to the charger to keep charging. This will eventually cause the charger to overheat and potentially smoke.
Fixes these symptoms
No Symptoms for this part
Chuck Key – Part Number: 330034-00
$7.76
Chuck Key
Fix Number FIX10169757
Manufacturer Part Number 330034-00
Fixes these symptoms
No Symptoms for this part
12V Battery (Saber Type) – Part Number: PS130
$47.82
12V Battery (Saber Type)
Fix Number FIX10255457
Manufacturer Part Number PS130
Fixes these symptoms
No Symptoms for this part
Charger – Part Number: 90593304
$10.81
Charger
Fix Number FIX10254305
Manufacturer Part Number 90593304
Fixes these symptoms
No Symptoms for this part

Popular Black and Decker Cordless Drill Models