DeWALT Compressor Valves

DeWALT Appliance Parts

Popular DeWALT Compressor Valves

DRAIN VALVE
$7.91
In Stock
★★★★★
★★★★★
3 Reviews
Fix Number
FIX12508562
Manufacturer Part Number
N286039
This is a single OEM drain valve for an air compressor. A drain valve is a small device that is usually located at the bottom of the compressor air receiver. The drain valve can be opened or closed, and this allows water to exit the tank. Water builds up if air is left in the tank for an extended period of time, and if left for too long, it can start to rust out the inside of the tank and the drain valve can become clogged with rust or start to corrode. You should be draining the tank each time you use your air compressor to stop this from happening. This is a very quick and simple repair. Use a wrench to remove the old drain valve, and thread the new one into place by hand.
Fixes these symptoms
★★★★★
★★★★★
6 Reviews
Fix Number
FIX18993125
Manufacturer Part Number
N008792
This is an OEM regulator repair kit for air compressors. This kit contains all the parts and instructions needed to restore a broken regulator. It is normal for the inner parts of the regulator to wear and have to be repaired over time. Before beginning this repair make sure you release the pressure from the air tank.
Fixes these symptoms
VALVE PLATE ASSY
$23.10
In Stock
★★★★★
★★★★★
2 Reviews
Fix Number
FIX12517182
Manufacturer Part Number
N017592SV
This is a valve plate for your compressor or generator. This part controls the air flow into the pump. When the air is pumped by the piston, it passes through the valve plate and into the compressor tank. The most common sign of a damaged valve is if your pressure is not building up in the tank. The reeds on the valve plate are usually the first thing to wear out. If you notice visible damage on the reeds you will need to replace this part. This valve includes the plate, and the lower gasket. The head gasket is sold individually.
Fixes these symptoms
VALVE CHECK 1/2NPT X
$23.41
In Stock
Fix Number
FIX18990718
Manufacturer Part Number
A19712
This check valve is used to direct air from the cylinder to the tank, and to prevent air from going back into the pump. It is a genuine OEM part used on air compressors. It features threaded fittings to attach it to the tank, pump, and pressure switch. A faulty check valve can cause the pump to restart even with a full tank, that in turn can overload the motor. This brass part is sold individually, and the tubes are sold separately. Always make sure to drain the tank before beginning the repair.
Valve Check 1/2npt X
$11.79
In Stock
Fix Number
FIX16687642
Manufacturer Part Number
N541850
This is an OEM Authorized part designed for Air Compressors. It is a metal Valve which is sold Individually. Check valve lets pressurized air flow into the tank and prevents air from flowing back into the pump. When replacing this part make sure to unplug the air compressor and release the air from the tank.
★★★★★
★★★★★
1 Review
Fix Number
FIX10187370
Manufacturer Part Number
N030566
This replacement regulator/manifold assembly is specially designed for Dewalt air compressors. It is a genuine OEM sourced item, not an aftermarket imitation. The purpose of this part is to adjusts the pressure of the air coming from the tank to the desired level. This kit includes a metal regulator body, (2) gauges, a brass quick connect fitting and a plastic regulator knob. To complete this repair you will need set of wrenches, screwdrivers, pliers and a thread sealing tape.
Fix Number
FIX10187318
Manufacturer Part Number
N028208
This is a genuine manufacturer sourced replacement regulator/manifold for air compressors. This part adjusts the pressure of the air coming from the tank to the desired level. Includes regulator body, two (2) gauges, two (2) brass quick connect fittings and a regulator knob. Make sure to unplug the air compressor release all the air from the tank before installing this part.
VALVE SAFETY
$31.32
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX12517294
Manufacturer Part Number
A17987
This is an authentic part that is intended to be used with air compressors from Porter Cable, Black & Decker, and Bostitch. This safety valve attaches to the switch box or the manifold, and is used to release air from the tank if the pressure becomes too high inside the tank. If the safety valve goes off it will need to be replaced, because it can not be reused. The safety valve is sold individually.
Valve
$10.88
In Stock
Fix Number
FIX17000937
Manufacturer Part Number
D20114
This safety valve is a genuine replacement part manufactured for use with air compressors. If the compressor's pressure switch malfunctions, and does not turn the motor off when the amount of pressure is met, the safety valve will open to release the extra air pressure. The amount of pressure required to open the safety valve is set by tension of the spring inside the valve. The spring can wear out, and leave the valve open at a lower pressure than what is set to turn the switch off, and will not allow pressure to build inside the tank. This safety valve has a thread sealant pre-applied, so additional thread sealant is not required, the safety valve is sold individually.
Regulator Bonnet
$6.51
In Stock
Fix Number
FIX10188758
Manufacturer Part Number
N148120SV
This is a genuine manufacturer approved replacement regulator bonnet designed for use with air compressors. This is an important part of the regulator which helps to adjusts the pressure of the air coming from the tank to the desired level. It is made out of plastic and it is sold individually.

Related DeWALT Compressor Parts