Craftsman Compressor Valves

★★★★★

★★★★★

3 Reviews

Fix Number

FIX12508562

Manufacturer Part Number

N286039

This is a single OEM drain valve for an air compressor. A drain valve is a small device that is usually located at the bottom of the compressor air receiver. The drain valve can be opened or closed, and this allows water to exit the tank. Water builds up if air is left in the tank for an extended period of time, and if left for too long, it can start to rust out the inside of the tank and the drain valve can become clogged with rust or start to corrode. You should be draining the tank each time you use your air compressor to stop this from happening. This is a very quick and simple repair. Use a wrench to remove the old drain valve, and thread the new one into place by hand.

★★★★★

★★★★★

6 Reviews

Fix Number

FIX18993125

Manufacturer Part Number

N008792

This is an OEM regulator repair kit for air compressors. This kit contains all the parts and instructions needed to restore a broken regulator. It is normal for the inner parts of the regulator to wear and have to be repaired over time. Before beginning this repair make sure you release the pressure from the air tank.

★★★★★

★★★★★

2 Reviews

Fix Number

FIX12517182

Manufacturer Part Number

N017592SV

This is a valve plate for your compressor or generator. This part controls the air flow into the pump. When the air is pumped by the piston, it passes through the valve plate and into the compressor tank. The most common sign of a damaged valve is if your pressure is not building up in the tank. The reeds on the valve plate are usually the first thing to wear out. If you notice visible damage on the reeds you will need to replace this part. This valve includes the plate, and the lower gasket. The head gasket is sold individually.

Fix Number

FIX18990718

Manufacturer Part Number

A19712

This check valve is used to direct air from the cylinder to the tank, and to prevent air from going back into the pump. It is a genuine OEM part used on air compressors. It features threaded fittings to attach it to the tank, pump, and pressure switch. A faulty check valve can cause the pump to restart even with a full tank, that in turn can overload the motor. This brass part is sold individually, and the tubes are sold separately. Always make sure to drain the tank before beginning the repair.

Fix Number

FIX16687642

Manufacturer Part Number

N541850

This is an OEM Authorized part designed for Air Compressors. It is a metal Valve which is sold Individually. Check valve lets pressurized air flow into the tank and prevents air from flowing back into the pump. When replacing this part make sure to unplug the air compressor and release the air from the tank.

Fix Number

FIX12099359

Manufacturer Part Number

E100971

This is an original Craftsman replacement part manufactured for use with air compressors. The regulator is used to adjust the amount of pressure in the tank. This regulator is sold as an individual replacement part.

★★★★★

★★★★★

1 Review

Fix Number

FIX12517294

Manufacturer Part Number

A17987

This is an authentic part that is intended to be used with air compressors from Porter Cable, Black & Decker, and Bostitch. This safety valve attaches to the switch box or the manifold, and is used to release air from the tank if the pressure becomes too high inside the tank. If the safety valve goes off it will need to be replaced, because it can not be reused. The safety valve is sold individually.

Fix Number

FIX17000937

Manufacturer Part Number

D20114

This safety valve is a genuine replacement part manufactured for use with air compressors. If the compressor's pressure switch malfunctions, and does not turn the motor off when the amount of pressure is met, the safety valve will open to release the extra air pressure. The amount of pressure required to open the safety valve is set by tension of the spring inside the valve. The spring can wear out, and leave the valve open at a lower pressure than what is set to turn the switch off, and will not allow pressure to build inside the tank. This safety valve has a thread sealant pre-applied, so additional thread sealant is not required, the safety valve is sold individually.

★★★★★

★★★★★

1 Review

Fix Number

FIX12513335

Manufacturer Part Number

CAC-4296-1

This replacement regulator is a high quality item that is supplied from original equipment manufacturer for use with air compressors. It allows user to adjust the pressure of the air coming from the tank to the desired level. Make sure to unplug the air compressor release all the air from the tank before installing this part. Please note one durable metal three port regulator with a plastic knob is included per order.

Fix Number

FIX18990683

Manufacturer Part Number

A13369

This is a genuine manufacturer supplied pressure regulator for Porter Cable Air Compressors. This part adjusts the pressure of the air coming from the tank to the desired level. Includes Regulator Body, Two (2) Brass Quick Connect Fittings, One (1) Elbow Fitting, And a Regulator Knob. Make sure to unplug the air compressor release all the air from the tank before installing this part.