Campbell Hausfeld Compressor Hoses and Tubes

Fix Number

FIX10050927

Manufacturer Part Number

ST033001AV

This part includes one authentic compression nut for an air compressor. It is used to attach the copper tubing to certain components of a compressor. You will also need a compression sleeve (ferrule) to seal the tube completely. The compression nut is placed on the tubing first, followed by the ferrule, which is sold separately.

Fix Number

FIX17016285

Manufacturer Part Number

ST117802AV-S

1/4

Fix Number

FIX10051909

Manufacturer Part Number

TF060402AJ

Fix Number

FIX10051933

Manufacturer Part Number

TF069000AJ

It is a genuine replacement part that is supplied by the original manufacturer for use with Campbell Hausfeld air compressors. The discharge tube transfers air between the cylinder and the tank on an air compressor. Over years due to regular wear and vibrations the ends of the outlet tube may begin to crack and leak eventually requiring replacement. It is a complete assembly which includes a durable metal discharge tube with two nuts and one ferrules.

Fix Number

FIX17016284

Manufacturer Part Number

HF002401AV-S

This genuine OEM replacement nipple is designed for use in air compressors, serving as a critical connector between the pressure switch, the tank, and the regulator. A damaged or corroded nipple can lead to air leaks and inconsistent pressure, affecting overall performance. To check for leaks, apply soapy water to the fittings around the pressure switch and watch for bubbles. If replacement is necessary, the process typically involves disassembling the pressure switch. Begin by draining the tank using the valve at the bottom, then remove the coupler from the regulator and unthread the nipple. Access the wire connections by removing the pressure switch shroud, and carefully note the position of each wire before disconnecting them—starting with the motor wire, followed by the cord wires and ground wires. Remove the strain relief, pressure gauge, and the airline connecting the check valve to the switch. Finally, unthread the pressure switch from the tank nipple and remove the nipple itself. When reassembling, it is recommended to use thread tape to ensure a proper seal. This replacement part is sold individually.

Fix Number

FIX10053930

Manufacturer Part Number

VT043300AP

This is a genuine OEM replacement part used with many air compressors machines. the exhaust tube is constructed of metal, and secures the tank to the cylinder head. This item helps with releasing the pressure overflow from the tank. An adjustable wrench is needed for the repair. This item is sold individually.

Fix Number

FIX10047049

Manufacturer Part Number

HL018100AV

Fix Number

FIX10051911

Manufacturer Part Number

TF060403AV

This precisionmachined tube fitting provides a secure, leakresistant connection in compressedair systems and replaces worn or corroded fittings.

Fix Number

FIX10051072

Manufacturer Part Number

ST072318AV

Fix Number

FIX10051002

Manufacturer Part Number

ST070307AV