OEM Campbell Hausfeld Compressor Parts & Accessories

Svc Compressor Pump Cw 75 X 51Mm

$331.09

Fix Number: FIX17016290
Manufacturer Part Number: VT4923

Svc Compressor Pump Cw 75 X 51Mm

Regulator

$29.37

Fix Number: FIX16760404
Manufacturer Part Number: RE206202AV

This is a genuine Campbell Hausfeld replacement part designed for use with air compressors. It is used to regulate the air pressure in the compressor tank. It is also used to regulate the air pressure of the air exiting the tank. In some instances you will need to lower or higher the air pressure of the tank and the air coming from the tank. It is made out of metal with a plastic knob. This regulator is sold individually. To complete this repair you would need a set of wrenches.

Wheel 10 In. Black Hub

$48.68

Fix Number: FIX10054061
Manufacturer Part Number: WA004000AV

This is an authentic replacement part sourced directly from the manufacturer. The wheel is commonly found in Campbell Hausfeld air compressors. This part is made of high-quality plastic and rubber, and is placed on the sides of the tank to make the machine easier to relocate. You will require a wrench when replacing this item. The wheel is provided as an individual replacement part.

Belt

$49.38

Fix Number: FIX17016282
Manufacturer Part Number: BT021501AV

This is a genuine OEM approved replacement drive belt. It is supplied by original equipment manufacturer for use with Campbell Hausfeld air compressors. This is the belt that connects the pump and the electric motor. Over time these rubber belts tend to wear out and stretch eventually requiring replacement to maintain peak performance. Always make sure to clean the pulleys before installing the new belt, this will help to ensure longevity of the new belt. Includes one (1) belt per order. Replacing this belt is a very simple task that should only require a screwdriver. • Make sure to unplug the compressor and drain the tank • Remove the cover screws • Separate the cover from the unit • Remove the old belt • Clean the pulleys • Install the new belt • Secure the cover with the screws

Regulator

$28.87

Fix Number: FIX10050276
Manufacturer Part Number: RE206203AV

This is a genuine manufacturer sourced replacement regulator. It is specially designed for Campbell Hausfeld air compressors. This part adjusts the pressure of the air coming from the tank to the desired level. Please note, this only includes the metal regulator and the plastic knob. The valves, gauges and the pressure switch are all sold separately. To complete this repair you would need an a screwdriver, pliers and a set of wrenches. • First make sure to unplug the compressor • Drain the air from the tank • Disconnect all the valves and gauges from the regulator • Remove the old regulator • Secure the new regulator assembly • Reassemble and test the new regulator

Pres Ga 250psi Sd Mnt Nochlogo

$16.37

Fix Number: FIX10046152
Manufacturer Part Number: GA016306AV

The purpose of a gauge is to register the pressure readings inside the tank. This replacement gauge is sourced directly from original equipment manufacturer for use with Campbell Hausfeld air compressors. The dial reads 0-250 PSI. Please note this gauge has a durable metal body and it is sold individually. You should only need a wrench and a thread-sealing tape to complete this repair.

Air Filter Element

$18.10

Fix Number: FIX10053822
Manufacturer Part Number: VH901800AV

This is a genuine OEM sourced replacement part used on Campbell Hausfeld air compressors. Its purpose is to filter out dust and debris from contaminating the engine. This filter is made out of paper and metal. This item is sold individually. To replace this you would need a wrench to remove the air cleaner cover.

Watch the install video

Ferrule

$6.51

Fix Number: FIX10051151
Manufacturer Part Number: ST085200AV

Genuine Campbell Hausfeld replacement part, this item is sold individually. The Ferrule in this case is used on all of the compressors listed below. It is placed inside a Compression Nut of which is on a copper or aluminum tube and then attached to a component of the compressor. It aids in stopping air leaks.

Fixes these symptoms

Air leak
See more...

Pressure Switch

$94.96

★★★★★

1 Review

Fix Number: FIX10043982
Manufacturer Part Number: CW209300AV

This is an OEM pressure switch for an air compressor. The pressure switch detects the pressure in the tank and controls when the unit shuts on and off. This part will need to be replaced if your air compressor is not turning on and off at the specified pressures of your unit, if it leaks, or if the copper contacts inside are corroded or burnt. This condor style pressure switch consists of four ports, a 90-degree quick-lock unloader, an on and off lever, and is 100-135 PSI.

Pressure Switch

$65.48

Fix Number: FIX10044010
Manufacturer Part Number: CW218000AV

This is an authentic replacement part manufactured for use with Campbell Hausfeld pressure washers. The pressure switch is used to turn the pump on or off depending on the amount of air pressure within the tank. A faulty switch will likely prevent the pump from turning on when the pressure in the tank is low. This switch is available as an individual replacement part, please see model diagram for associative parts.

Campbell Hausfeld Compressor Parts

Popular Campbell Hausfeld Compressor Parts

Campbell Hausfeld Compressor Appliance Types

Related Campbell Hausfeld Compressor Parts

Popular Campbell Hausfeld Compressor Models

Campbell Hausfeld Compressor Parts

Start With Your Model Number

Popular Campbell Hausfeld Compressor Parts

Campbell Hausfeld Compressor Appliance Types

Related Campbell Hausfeld Compressor Parts

Popular Campbell Hausfeld Compressor Models