Campbell Hausfeld Compressor Belts

Fix Number

FIX17016282

Manufacturer Part Number

BT021501AV

This is a genuine OEM approved replacement drive belt. It is supplied by original equipment manufacturer for use with Campbell Hausfeld air compressors. This is the belt that connects the pump and the electric motor. Over time these rubber belts tend to wear out and stretch eventually requiring replacement to maintain peak performance. Always make sure to clean the pulleys before installing the new belt, this will help to ensure longevity of the new belt. Includes one (1) belt per order. Replacing this belt is a very simple task that should only require a screwdriver. • Make sure to unplug the compressor and drain the tank • Remove the cover screws • Separate the cover from the unit • Remove the old belt • Clean the pulleys • Install the new belt • Secure the cover with the screws

Fix Number

FIX10043214

Manufacturer Part Number

BT003100AV

This is an authentic OEM sourced item that is specially designed for use with Craftsman air compressors. It is an identical replacement for a missing or worn belt that drives the unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality item is made of durable rubber and is sold individually.

Fix Number

FIX11999882

Manufacturer Part Number

BT013101AV

This is an original Campbell Hausfeld replacement part manufactured for use with air compressors. This v-belt is driven by the electric motor, and drives the pulley on the pump. Belts can eventually wear out and break causing the pump to stop building pressure. The belt is sold individually.

Fix Number

FIX10242647

Manufacturer Part Number

BT013001AV

This replacement belt is an authentic OEM sourced item, not an aftermarket imitation. It is commonly used on Campbell Hausfeld air compressors. It is the main belt that drives the unit. Over time rubber belts tend to wear out and stretch requiring replacement. Please note, this item is sold individually. To complete this repair you will need a wrench. • Remove the belt cover • Take out the old belt • Secure the new belt • Reattach the housing

Fix Number

FIX10043225

Manufacturer Part Number

BT009701AV

This is an authentic Campbell Hausfeld replacement part that has been sourced from the original manufacturer to be used with air compressors. The belt attaches to the motor pulley and the pump\\\'s flywheel. This item allows the rotation of the motor\\\'s driveshaft to rotate the pumps crankshaft. This item is sold as an individual replacement part.

Fix Number

FIX10242648

Manufacturer Part Number

BT020601AV

This is a genuine part which is supplied directly by the original equipment manufacturer and is used with Campbell Hausfeld air compressors. The drive belt transfers power between the motor and the pump of the air compressor. This part is made of rubber and is sold individually. For installation, you will need a screwdriver, a pair of needle nose pliers, and a socket wrench to aid you in this repair.

Fix Number

FIX11999873

Manufacturer Part Number

BT008501AV

This is an authentic Campbell Hausfeld replacement part that has been sourced from the original manufacturer to be used with air compressors. The cogged belt is used to connect the motor's drive pulley and the pump assembly. This item is available as an individual replacement part.

Fix Number

FIX10043222

Manufacturer Part Number

BT005400AV

This is a genuine manufacturer-sourced replacement component which is supplied for use with Campbell Hausfeld air compressors. It is the main belt of the unit which is attached to the pump, over time it may wear out and stretch eventually requiring a replacement to maintain peak performance. Please note this high-quality belt is made of durable rubber material and it is sold individually.

Fix Number

FIX10043234

Manufacturer Part Number

BT023101AV

Fix Number

FIX10043221

Manufacturer Part Number

BT005000AV

This item is available as an individual replacement part. The belt goes around the pulley and is made of a durable material. A screwdriver might be necessary during the installation of this part. It will need to be replaced if it stretches or breaks. This genuine item is supplied by the original equipment manufacturer for use with Campbell Hausfeld compressors.