DeWALT Circular Saw Seals and Gaskets

Fix Number

FIX16676215

Manufacturer Part Number

050056-00

This is an authentic manufacturer sourced replacement part that is specially produced for use with Dewalt and Black and Decker power tools. The purpose of an o-ring is to provide and air-tight seal between two connected parts, over time it may deteriorate and crack eventually requiring replacement.It is made of durable rubber material and it is sold individually.

Fix Number

FIX10165241

Manufacturer Part Number

056122-00

Fix Number

FIX10180934

Manufacturer Part Number

605081-01

Fix Number

FIX10181409

Manufacturer Part Number

61145-00

This is an authentic DeWALT replacement part. The ring is designed by the manufacturer for use in power tools such as hammer drills, compressors, and saws. This part is made of flexible plastic, and is generally used to seal and cushion the connection between two components. It may be found in various locations in the machine, depending on model. Please be aware that there are different O-rings used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You may require a screwdriver and pliers when replacing this part. This item is sold individually.

Fix Number

FIX10184204

Manufacturer Part Number

701297-00

O-rings are designed to contain thousands of pounds of pressure by creating a seal between two or more parts. O-ring measurements are defined by the inside diameter and the thickness. There are many causes for O-Ring failure, such as pressure, friction, temperature or chemicals. The most common are: • <u>Extrusion and Nibbling</u> - O-ring has ragged, tattered edges. These are commonly caused by pressure spikes which shear off tiny "bites" from the o-ring, or caused by clearance gaps. • <u>Abrasion</u> - One or both sides of the o-ring appear rough and slightly flattened. Commonly caused by a contact surface that is too rough, contains grit or is too smooth to allow lubrication. • <u>Over Compression </u> - O-ring is flattened on both sides and may have a "ring" split along its length. Commonly caused by excessive pressure or heat. • <u>Heat Hardening</u> - O-ring has a pitted or cracked surface, and often is flattened on both sides. Caused by temperature exceeding o-ring capacity. • <u>Weather/Ozone Cracking</u> - O-ring is covered in small surface cracks. Caused by exposure to ozone, UV rays and air pollution. Excessive seal stretching causes similar cracking.

Fix Number

FIX12527657

Manufacturer Part Number

N521648

Fix Number

FIX12529239

Manufacturer Part Number

N361499

Fix Number

FIX10166176

Manufacturer Part Number

147194-00

Included in part number 145353-10

Fix Number

FIX10166395

Manufacturer Part Number

150181-00

Fix Number

FIX10169066

Manufacturer Part Number

323711-58