DeWALT Chop Saw Bearings

DeWALT Appliance Parts

Popular DeWALT Chop Saw Bearings

Bearing
$6.51
In Stock
Fix Number
FIX10188435
Manufacturer Part Number
N110359
This authentic ball bearing is sold individually. It can be used in a variety of differently model types, such as miter saws, circular saws, table saws, and angle grinders. This ball bearing is sealed on both sides. Its job is to minimize friction between rotating parts. The armature rotates at a very fast rate, so after years of use, it is normal for the bearings to wear.
Ball Bearing
$8.25
In Stock
Fix Number
FIX10180911
Manufacturer Part Number
605040-27
This part includes one OEM ball bearing. This ball bearing is sealed on both sides. They are designed to minimize friction between moving parts and evenly distribute weight. Bearings are a general wear part that require regular maintenance to keep your equipment running smoothly and efficiently.
Ball Bearing
$35.64
In Stock
Fix Number
FIX10166095
Manufacturer Part Number
146555-01
Genuine Manufacturer Sourced replacement part used on a variety of equipment. This part is made out of Metal and is Sold Individually. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the tool and allows it to run smoothly. Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement. Included in part number 395843-00
Ball Bearing
$20.28
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX10169632
Manufacturer Part Number
330003-64
This is a ball bearing for your power tools. It is used in a variety of machines for rotary motion. The bearings support your tools by lowering the friction, which allows easy rotation of moving parts. Depending on how often you use your tool the bearings are a commonly replaced part. This is because they will experience most of the pressure, heat, and vibrations.
Ball Bearing
$9.13
In Stock
Fix Number
FIX10180907
Manufacturer Part Number
605040-15
Genuine OEM sourced replacement part used on a variety of power tools. Ball bearings are used to reduce friction between rotating parts. Bearings experience constant wear when the tool is in operation, because of this they need to be periodically checked and replaced if needed. This part is made out of metal and it is sold individually. Included in part number 381004-00 spindle assembly.
Bearing Block
$8.88
In Stock
Fix Number
FIX10183730
Manufacturer Part Number
650728-00
This is an authentic replacement part assembled by original manufacturer. It is used in some DeWALT band saws. Bearing blocks hold bearings stable. This part is sold individually.
Bearing Cup
$6.51
In Stock
Fix Number
FIX10181303
Manufacturer Part Number
609970-00
This is an authentic OEM sourced component which is specially designed for use with DeWALT and Black and Decker grinders and saws. It provides an identical replacement for a missing or a faulty bearing cup that was installed on a new unit. The part helps to secure the bearing which is sold separately. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality part is made of durable material and is sold individually.
330003-60
$6.51
Special Order
Fix Number
FIX10169630
Manufacturer Part Number
330003-60
This is a bearing, and it is used in various power tools. It is meant to reduce tension between the moving parts within the tool. This bearing has a 1 inch outer diameter, less than 1/4-inch inner diameter, and green walls.
Ball Bearing
$6.51
In Stock
Fix Number
FIX16680878
Manufacturer Part Number
605040-31
Included in part number 450503-01, Inside diameter is 3/4" Outside Diameter is 1 1/2"
Bearing,ball
$26.55
In Stock
Fix Number
FIX10185039
Manufacturer Part Number
860154-00
This is an authentic replacement part that has been sourced from the original manufacturer to be used with radial arm saws from DeWalt and Black and Decker. The bearing is used to reduce friction between a rotating shaft and a fixed part assembly. This bearing is sold as an individual replacement part.

Related DeWALT Chop Saw Parts