Milwaukee Angle Grinder Bearings

Fix Number

FIX10116846

Manufacturer Part Number

02-04-0845

This is a Genuine OEM Approved replacement part used on a variety of Milwaukee Power Tools. This Ball Bearing has multiple applications based on your tool. Ball Bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the tool and allows it to run smoothly. Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement. This part is made out of Metal and it is Sold Individually. To replace this Bearing you would need a Screwdriver and Pliers.

Fix Number

FIX10116859

Manufacturer Part Number

02-04-0910

This is an authentic part produced by the original manufacturer. It is compatible with Milwaukee power tools including grinders, sanders, and polishers. Ball bearings secure moving parts, allowing for free movement while reducing friction. They are high wear parts that may need regular replacement for optimal performance from tools. Sold individually.

★★★★★

★★★★★

2 Reviews

Fix Number

FIX10116783

Manufacturer Part Number

02-04-0033

This is a 605RS ball bearing commonly used in hand-held tools like grinders. It is located within the rotor assembly of the grinder, facilitating smoother rotation and reducing friction between the rotor and its housing. Without this ball bearing, the rotor would rub against its housing, leading to premature grinder wear and decreased efficiency. Signs that this ball bearing needs replacement include excessive noise, vibrations, heat, and difficulty in rotation during operation. To prevent further damage to your grinder or other internal components, it is crucial to replace the bearing when any of these signs appear. Replacing this ball bearing will require grease and various screwdrivers. Start by disconnecting the battery and removing the side handle. Next, unscrew and disconnect the screws securing the main grinder housing to access the interior. Carefully remove the rotor. Extract the old bearing by first removing its retaining ring and then using a punch if necessary. Apply grease to the new bearing and insert it into the housing. Reinstall the rotor along with its securing screws, and then reassemble the grinder housing, including the side handle.

Fix Number

FIX10116825

Manufacturer Part Number

02-04-0620

This is an authentic manufacturer approved replacement item. It is commonly used on Milwaukee angle grinders. This sealed metal bearing helps to secure armature while allowing it to spin freely. Includes one (1) bearing per order. To complete this repair you would need a screwdriver and pliers. • Remove the side handle • Remove the guard • Remove the handle • Separate the grinder • Disengage the brushes • Remove the fan • Remove the gear case • Remove the armature • Remove the pinion gear • Remove the front bearing • Install the new bearing • Reassemble unit and test it

Fix Number

FIX10116851

Manufacturer Part Number

02-04-0852

This bearing is an authentic part produced by the original manufacturer. It is compatible with a variety of Milwaukee handheld power tools. Ball bearings reduce friction between metal parts. They allow parts such as axles and shafts to rotate freely and steadily. Ball bearings are high wear components and are commonly replaced. Sold separately.

Fix Number

FIX10116960

Manufacturer Part Number

02-04-2110

It is an authentic item sourced directly from original equipment manufacturer. It is generally used on Milwaukee angle grinders. This bearing helps to support armature and allows it to spin freely. Over time because of pressure and heat ball bearings will wear out and need to be replaced. Please note this sealed metal bearing is sold individually. Replacing this ball bearing is a relatively easy task. You would need a screwdriver, pliers and a rubber mallet to complete this repair. • Make sure the tool is unplugged. • Remove the side handle. • Remove the guard. • Remove the handle. • Separate the grinder. • Disengage the brushes. • Remove the fan. • Remove the gear case. • Remove the armature. • Remove the pinion gear. • Remove the front bearing. • Install the new bearing. • Reassemble and test the unit.

Fix Number

FIX11876489

Manufacturer Part Number

02-04-1745

It is a genuine OEM sourced item that is designed for use with Milwaukee power tools. This special bearing allows spindle shaft to rotate freely with minimal friction, over time the rollers of the bearing may begin to wear out and fail eventually requiring replacement. It is a high-quality component which is made of durable steel and it is sold individually.

Fix Number

FIX10117081

Manufacturer Part Number

02-50-2423

This part is provided by the original manufacturer for Milwaukee power tools. The metal bearing is used to prevent friction between moving parts, and usually goes inside a gear. The item includes one needle bearing, and please be aware any associated parts are sold separately. Please refer to your models parts diagram for any additional parts.

Fix Number

FIX10116874

Manufacturer Part Number

02-04-1020

Inner diameter 3/8" Outer Diameter 1"

Fix Number

FIX10116860

Manufacturer Part Number

02-04-0911

This is a genuine ball bearing manufactured for Milwaukee. It is compatible with many types of power tools including Sawzalls, drills, rotary hammers, and grinders. Ball bearings are made to reduce friction between moving parts. They are a high wear part which may need to be replaced relatively frequently. This piece is sold individually.