Makita Angle Grinder Caps and Lids

Makita Appliance Parts

Popular Makita Angle Grinder Caps and Lids

Cord Guard
$6.51
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX10153921
Manufacturer Part Number
682505-8
This cord guard or strain reliever prevents cord damage by covering the last portion of a cord before entering a tool. This provides extra support and rigidness. The cord fits garden and lawn equipment. With use, the cord guard can break down and your cord is left unprotected, in this case it is best to replace the guard. Refer to the diagram provided by the manufacturer for installation instructions.
Cord Guard
$6.51
In Stock
Fix Number
FIX10153918
Manufacturer Part Number
682502-4
This is a cord guard, also known as a strain reliever, for your power tools. Power tool cords go through a lot of stress during usage, and this part is designed to remove some of that stress from the weakest point, which is where the cord meets the tool. Depending on how often you use your power tool, your cord guard will deteriorate. When this happens, you should replace it immediately. Keeping a strong power cord guard will help your tool live a longer life.
Brush Holder Cap
$6.51
In Stock
Fix Number
FIX10153362
Manufacturer Part Number
643750-0
This is a Genuine OEM replacement part used on Makita Power Tools. This item is made out of Plastic and it is Sold Individually. The purpose of the Brush Cap is to retain the Brushes in the Brush Holders. This Brush Cap has external threads that thread into the housing of the tool. Be careful when removing and replacing these, they have a tendency to break.
Brush Holder Cap
$6.51
In Stock
Fix Number
FIX10153352
Manufacturer Part Number
643650-4
This is a brush holder cap for a variety of power tools. The cap contains the brush in the holder. It protects the motor brush on the motor brush holder by covering it. To remove the cap, you will need a slotted screwdriver. Do not press hard when removing this part, they break easily under pressure.
Brush Holder Cap
$6.51
In Stock
Fix Number
FIX10153356
Manufacturer Part Number
643700-5
This is a manufacturer sourced replacement part designed for use with Makita power tools. It helps to secure the brush in the housing. This screw-in cap is made of hard plastic and it is sold individually and measures 7-18 HM 1500. To replace it you would need a flat-head screwdriver.
Cord Guard 10
$6.51
In Stock
Fix Number
FIX10153941
Manufacturer Part Number
682573-1
Cord Guard 10
$10.36
In Stock
Fix Number
FIX10153934
Manufacturer Part Number
682560-0
It is a genuine manufacturer-sourced which is specially designed for Makita power tools. Power cords undergo a lot of stress, and these cord guards help to alleviate some of that stress at the weakest point, right where the cord enters the tool. Unfortunately, over time the material will wear out and may begin to fail eventually requiring a replacement. Keep in mind this high-quality item is made of durable rubber and is sold individually.
Cord Guard 8
$6.51
In Stock
Fix Number
FIX10153933
Manufacturer Part Number
682559-5
This cord protector is an OEM part designed for a variety of Makita power tools. It is attached where the power cord meets the tool. This part protects the cord from damage due to pulling, bending, or other strain. This rubber cord protector is sold individually. It does not include a replacement cord.
Cord Guard 10
$6.51
In Stock
Fix Number
FIX10153936
Manufacturer Part Number
682566-8
This is a genuine part which is supplied directly by the original equipment manufacturer and is used with Makita angle grinders. The cord protector fits through the opening in the housing where the power cord is wired, it will protect the base of the cord from getting bent or pinched. This part is made of rubber and is sold individually. For installation, you will need a screwdriver and a pair of needle nose pliers to aid you.
Toolless Wheel Guard
$47.77
Special Order
Fix Number
FIX16592626
Manufacturer Part Number
123542-8

Related Makita Angle Grinder Parts