Makita Sander Parts

Makita Appliance Parts

Popular Makita Sander Parts

Carbon Brush Set
$24.97
In Stock
Fix Number
FIX10156653
Manufacturer Part Number
CB340
Set of 2 Carbon Brushes with wire leads and brush springs attached. The set contains genuine Makita replacement parts, and comes packaged in a Makita retail box. rnThis brush set will fit the Makita tools listed at the bottom of the page. • Worn brushes frequently are the cause behind a motor running poorly. • Replacing brushes can fix a motor that’s operating intermittently. • New brushes can restore a motor’s electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.
Washer 10
$6.51
In Stock
Fix Number
FIX10144418
Manufacturer Part Number
253951-8
Genuine OEM Authorized replacement part designed for Makita Disc Sanders. This part is made out of Metal and it is Sold Individually. This Washer helps to secure the Plastic Pad to the Unit. You would need a Hex Key/Allen Wrench to remove the Screw that secures it.
Switch
$24.97
In Stock
Fix Number
FIX10153604
Manufacturer Part Number
651285-7
This is a Genuine Manufacturer Sourced replacement part used on Makita Sanders. This switch has a Plastic Body and Trigger. Switches are a commonly replaced part in power tools, handling on/off operations. Because switches use mechanical internals, they will degrade and wear out over time, eventually requiring replacement. To replace this switch you would need a Screwdriver. • First make sure the tools is not plugged in • Then you want to remove Screws used to hold two pieces of Housing Set together • Disconnect Wires from the old Switch and remove it from the Housing • Place the new Switch in the Housing and connect Wires to it • Reassembly the Housing
Carbon Brush Set
$14.06
In Stock
Fix Number
FIX10156669
Manufacturer Part Number
CB75
If your motor is running poorly, running intermittently, it is likely in need of new carbon brushes. This part includes a set of two carbon brushes with wire leads and brush springs attached. Changing the carbon brushes is part of your regular maintenance, so it is a good idea to have a few extra on hand. When replacing the carbon brushes, it is also advised to inspect the armature at the same time.
Switch
$22.15
In Stock
Fix Number
FIX10153639
Manufacturer Part Number
651527-9
This is a Rocker type switch that has internal terminals. This is a genuine Makita replacement part that is sold individually. rnrnSwitches are commonly replaced parts in tools. A switch handles on/off and variable speed operations. They also have a role in electric breaking; they can momentarily reverse electrical polarity. Because switches use mechanical internals, they will degrade and wear out over time, eventually needing replacement. Some common signs of a broken or failing switch are as follows:rn • The tool has completely stopped functioning - it will not start. rn • The tool operates intermittently, requiring multiple tries to turn on, until eventually it won't start at all.rn • The variable speed function and electric braking aren't working properly.
Brake Ring
$10.43
In Stock
Fix Number
FIX10151383
Manufacturer Part Number
424131-5
This brake ring is an authentic component. It is sourced directly from the original equipment manufacturer for use with Makita sanders. The brake ring fits on top of the sander pad. Over time it may wear out or get damaged eventually requiring a replacement. It is made of high-quality plastic and is sold as an individual component. Check the diagrams of your model for the exact location and the correct installation of this part. You will need a screwdriver to remove the sander pad in order to replace the brake ring.
Fix Number
FIX10140177
Manufacturer Part Number
158324-9
This is a genuine Makita replacement part, it is sold individually. It has a soft foam pad with a metal backing. It has six vacuum holes for use with the 166078-4 Dust bag. It is remove by unscrewing four 266020-6 Screws. The sandpaper is held by two clamps on the base assembly.
Hex Head Socket Bolt
$6.51
In Stock
Fix Number
FIX10145268
Manufacturer Part Number
265812-0
This is an authentic OEM approved replacement part designed for use with Makita sanders. The purpose of this bolt is to secure the sandpaper disc to the pad. It is made out of metal and it is sold individually. To install or remove this bolt you would need a hex key/allen wrench.
Cord Guard
$6.51
In Stock
Fix Number
FIX10153918
Manufacturer Part Number
682502-4
This is a cord guard, also known as a strain reliever, for your power tools. Power tool cords go through a lot of stress during usage, and this part is designed to remove some of that stress from the weakest point, which is where the cord meets the tool. Depending on how often you use your power tool, your cord guard will deteriorate. When this happens, you should replace it immediately. Keeping a strong power cord guard will help your tool live a longer life.

Installation Instructions

John from Hancock, MI
Did not come with grinding disc guard
While unit was unplugged I screwed clamp of guard around grinder. Read more...
Carbon Brush Set
$40.50
In Stock
Fix Number
FIX10156646
Manufacturer Part Number
CB204
This is a set of two OEM carbon brushes with wire leads and brush springs. To ensure your motor is running efficiently, it is important to continually inspect the carbon brushes, as they are a common wear part. If they are damaged this will greatly affect the performance of the motor. If burns or cracks are present, it is advised to inspect the armature as well.

Makita Sander Appliance Types

Popular Makita Sander Models