OEM Coleman Lighting Parts & Accessories

Globe

$23.95

Fix Number: FIX11999176
Manufacturer Part Number: 2000026613

This is a Genuine Manufacturer Sourced replacement part used on some Coleman Gas Lanterns. This part is made out of Clear Glass, and it is sold individually. The spare lantern globe can be installed safely and easily with no additional tools.

Leather Pump Cup

$9.35

Fix Number: FIX17016716
Manufacturer Part Number: 2165091

This genuine Coleman replacement part is designed for use with select lanterns and stoves. Made from high-quality leather, this pump cup fits securely at the end of the pump plunger, creating an airtight seal that’s essential for proper pressure buildup and reliable operation. Over time, leather pump cups can dry out, crack, or harden, which can reduce performance or prevent your equipment from functioning altogether. If you notice difficulty building pressure or visible wear on the cup, it’s time for a replacement. This part is sold individually and installs easily—no tools required. For best results, keep the leather lightly oiled to maintain flexibility and extend its lifespan.

Globe

$29.53

Fix Number: FIX10242138
Manufacturer Part Number: R5177B043C

This is a genuine Coleman replacement globe made for lantern models 5177 and 5178. This is a newer-style globe made of transparent glass. To decrease the chances of breaking this part, the manufacturer recommends using a hard or soft protective carry case when transporting or storing your lantern. This globe is sold individually. To Replace This Part: • Unscrew the Ball Nut (Part Number: 220-4411) located at the very top of the lantern; it should be possible to remove this part just by hand, without any tools • Lift the Ventilator Lid (Part Number: 5178-4801) to remove it • Lift the old globe to remove it; set the new globe into place • Replace the Ventilator Lid and Ball Nut

Neoprene Pump Cup

$9.34

Fix Number: FIX17016707
Manufacturer Part Number: 2161091

Neoprene Pump Cup

Generator

$23.40

Fix Number: FIX12093770
Manufacturer Part Number: 3000005090

This is an Original Manufacturer Sourced replacement part used on some Coleman Gas Lanterns. Generator includes new gas tip, spring, and tip cleaning wire. If the lantern lights for a few seconds then goes out and there is no sound of air passing through the generator, there is either no pressure in the fuel tank or the generator is clogged.

Generator

$28.09

Fix Number: FIX17016705
Manufacturer Part Number: 3000005404

This authentic replacement part is sourced directly from Coleman for use in gas lanterns. Generators vaporize fuel so it can mix with air. Included with this assembly is the cleaning rod, insulator, tube, nut, and spring; every part needed to replace the generator is included. When installing this part make sure the nut is completely tightened in order to prevent fuel leaks.

Pump Repair Kit

$28.09

Fix Number: FIX17016714
Manufacturer Part Number: 3000006400

This is a genuine OEM replacement part used with Coleman gas lanterns. This part is made for newer lanterns with a plastic pump cap, but it does include the parts to convert it to an older-style metal pump cap. This kit includes the parts for one repair. A pair of needle nose pliers and some lubrication oil will be needed for this fix.

Pump Cup & Clip

$7.60

Fix Number: FIX17016711
Manufacturer Part Number: 6391091

This genuine Coleman replacement part is designed for use with liquid fuel lanterns and is installed inside the generator pump. The assembly includes a neoprene rubber pump cup and a metal pump clip (also known as a pump nut). The pump cup forms a seal within the pump to prevent air leakage and maintain pressure, while the pump clip secures the cup in place on the plunger shaft, positioned closer to the interior of the lantern. Before installation, the pump cup should be coated with Pump Lube (part #200K2251) to ensure proper function. This replacement set includes one pump cup and one pump clip.

Watch the install video

Pump Plunger

$12.32

★★★★★

1 Review

Fix Number: FIX10240995
Manufacturer Part Number: 242J5201

This genuine OEM kit for your gas lantern includes the plunger, one spring clip, one metal cap, one spring, and one clip. The purpose of the pump plunger is to keep the lantern pressurized. To remove the pump from the lantern, you will need a small flat blade screwdriver to pry open the spring clip. Before installing the new pump, apply a small amount of motor oil to both the plunger and the shaft.

Valve Assy

$36.19

Fix Number: FIX10241039
Manufacturer Part Number: 288A6571

This genuine Coleman assembly designed for use with 2-Mantle Dual Fuel Lanterns. This part controls the release of the air fuel mixture into the burner, controlling the level of light released by the mantles. A screwdriver is used for this repair. Note that the Generator is sold separately as part # 3000000453. This Assembly Includes the Following Parts: • Valve Knob, Part Number: 288C1501 • Pack Nut, Part Number: 242B6161 • Pack Washer, Part Number: 1201B1101 • Valve Stem Packing, Part Number: 118D6201 • Valve Stem, Part Number: 288A6141 • Eccentric Block A, Part Number: 288C3041 • Valve Block, Part Number: 288B3031 • Valve Core, Part Number: 288-3651 • O Ring, Part Number: 288-1261 • Feed Tube Assy, Part Number: 288B5231

Coleman Lighting Parts

Popular Coleman Lighting Parts

Coleman Lighting Appliance Types

Popular Coleman Lighting Models

Coleman Lighting Parts

Start With Your Model Number

Popular Coleman Lighting Parts

Coleman Lighting Appliance Types

Popular Coleman Lighting Models