Whirlpool/Whirlpool_Thumb/0XW0IVKY.gif
See part 8 in the diagram
( Grid squares measure 1x1 inch )

Hub Gear

★★★★★
★★★★★
3 Reviews
$ 22.67   In Stock
Fix Number: FIX12348886
Manufacturer #: W11192795
Manufactured by: Whirlpool

Product Description

Includes both the attachment and beveled gear. This worm follower gear is for stand mixers. Worm follower gear meshes with the worm gear, causing the rotation of the planetary assembly where the accessories attached. Unplug the mixer before installing this part. Wear work gloves to protect your hands.

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.8 / 5.0, 6 reviews.
    Sort by:
    Sorry, we couldn't find any existing installation instruction that matched.
    mixer skipped while turning
    followed instructional video the hardest part was removing the snap ring! once that was removed it was a piece of cake!
    14 of 14 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    The mixer would not spin.
    Took the cover off of the transmission and replaced gears, pin and gasket and added new grease.
    6 of 6 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      Alan from Mercer, PA
    • Parts Used:
      WP9703680, W11192795
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      Less than 15 mins
    • Tools:
      Screw drivers
    The Bevel Gear had stripped several teeth off
    1.Remove Mixer top (4 screws) 2.remove gear case cover (4 screws) 3. Remove old retaining ring 4. Lift old bevel gear from shaft. 5. Remove retaining pin from shaft and drop shaft out bottom 6. Remove ALL old grease making sure to get all metal pieces from old bevel gear. 7. inspect all gears for damage 8. replace shaft and retaining pin 9. Place new bevel gear onto shaft and secure with retaining ring 10 Install new grease liberally 11. replace gear cover case and secure with 4 screws 12. Replace case top and secure with 4 screws
    2 of 3 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Noise and no motion
    1 Open case and get to the gear assembly 2 remove snap ring and remove gear
    3 remove pin and remove and replace gear
    1 person found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Accessory input port striped. Not driving attachment.
    Problem found is plastic transmission cover cracked causing too much play between gears causing them to skip and strip. New replacement cover is cast metal. Great improvement. Remove trim ring (one screw). Remove top cover (4 screws). Remove plastic transmission cover (4 screws). Remove snap ring that holds too beveled gear. Replace gear and re install snap ring. Replace gear in transmission (other beveled gear) I also replace bronze bushings at each end of the adjacent worm gear. Re pack all gears and transmission cover with fresh grease. Reinstall all gears and transmission cover. Ensure all components are properly seated and lined up. Re instal cover and trim ring. Easy fix. Less than an hour. Works as good as new. Replacement parts fit perfectly.
    0 of 2 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Bevel gear broke
    Took it apart. Saw the broken gear. Got online and ordered the parts and completed the repair as soon as the parts came.
    0 of 4 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
      Customer Reviews
      Average Rating: (3 Reviews)
      4.7
      ★★★★★
      ★★★★★
      Filter By Rating:
      • 5
        2
      • 4
        1
      • 3
        0
      • 2
        0
      • 1
        0
        Sort by:
        Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
          Model Compatibility
          This part works with the following models:
          Fix Number: FIX12348886
          Manufacturer Part Number: W11192795
          Brand
          Model Number
          Description
          KitchenAid
          4KB25G1XBU3
          Mixer
          KitchenAid
          4KB25G1XBU5
          Mixer
          KitchenAid
          4KB25G1XBY5
          Mixer
          KitchenAid
          4KB25G1XCO5
          Mixer
          KitchenAid
          4KB25G1XER3
          Mixer
          KitchenAid
          4KB25G1XER5
          Mixer
          KitchenAid
          4KB25G1XGA5
          Mixer
          KitchenAid
          4KB25G1XMC5
          Mixer
          KitchenAid
          4KB25G1XMY5
          Mixer
          KitchenAid
          4KB25G1XOB3
          Mixer
          KitchenAid
          4KB25G1XOB5
          Mixer
          KitchenAid
          4KB25G1XTG3
          Mixer
          KitchenAid
          4KB25G1XTG5
          Mixer
          KitchenAid
          4KB25G1XWW3
          Mixer
          KitchenAid
          4KB25G1XWW5
          Mixer
          KitchenAid
          4KD2661XMC3
          Mixer
          KitchenAid
          4KG25G0XMC4
          Mixer
          KitchenAid
          4KG25G0XWH4
          Mixer
          KitchenAid
          4KG25G7XER4
          Mixer
          KitchenAid
          4KG25G7XOB4
          Mixer
          KitchenAid
          4KG25G7XSL4
          Mixer
          KitchenAid
          4KG25G7XWH4
          Mixer
          KitchenAid
          4KG25H3XER5
          Mixer
          KitchenAid
          4KG25H3XOB5
          Mixer
          KitchenAid
          4KG25H3XSL5
          Mixer
          KitchenAid
          4KG25H3XWH5
          Mixer
          KitchenAid
          4KN15C1XER1
          Mixer
          KitchenAid
          4KN15C1XMC1
          Mixer
          KitchenAid
          4KN15C1XOB1
          Mixer
          KitchenAid
          4KN15C1XWH1
          Mixer