12070620-1-M-Whirlpool-W11086780-Worm Following Gear
Part Location Diagram of W11086780 Whirlpool Worm Following Gear
See part 10 in the diagram
12070620-1-S-Whirlpool-W11086780-Worm Following Gear 360 view
( Grid squares measure 1x1 inch )
12070620-1-S-Whirlpool-W11086780-Worm Following Gear 12070620-2-S-Whirlpool-W11086780-Worm Following Gear 12070620-3-S-Whirlpool-W11086780-Worm Following Gear 12070620-1-S-Whirlpool-W11086780-Worm Following Gear 360 view
Part Location Diagram of W11086780 Whirlpool Worm Following Gear

Worm Following Gear W11086780

★★★★★
★★★★★
3 Reviews

Rated by 12 customers 

?

Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

?
$18.28
In Stock
Fix Number:
FIX12070620
Manufacturer #:
W11086780
Manufactured by:
Whirlpool
Product Description
This is a genuine OEM worm following gear for your stand-up mixer. The gear is made of metal and is attached to the planetary shaft. This is an important part of the appliance as it helps to drive the beaters for your mixer. Over time, the teeth on the gear can become stripped or worn down, and it will need to be replaced. Signs that you may need to replace this gear are if the mixer is not spinning, or if it making excessive noise. Please be sure to unplug the mixer before beginning this repair.
Works with the following brands:
KitchenAid, Whirlpool
Works with the following products
Mixer
Fixes the following symptoms
Touchpad does not respond
Part Number Cross Reference
Part# W11086780 replaces these:
AP6048307, 9703543, 9706529, W10916068, WP9706529
9 Related Parts 2 Questions and Answers 12 Installation Instructions ★ 3 Customer Reviews Model Compatibility
Product Description Questions and Answers Related Parts Installation Instructions Customer Reviews Model Compatibility

Product Description

This is a genuine OEM worm following gear for your stand-up mixer. The gear is made of metal and is attached to the planetary shaft. This is an important part of the appliance as it helps to drive the beaters for your mixer. Over time, the teeth on the gear can become stripped or worn down, and it will need to be replaced. Signs that you may need to replace this gear are if the mixer is not spinning, or if it making excessive noise. Please be sure to unplug the mixer before beginning this repair.

  • Works with the following brands:
    KitchenAid, Whirlpool
  • Works with the following products:
    Mixer
  • Fixes the following symptoms:
    Touchpad does not respond
  • Part# W11086780 replaces these:
    AP6048307, 9703543, 9706529, W10916068, WP9706529

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

2 questions answered by our experts.
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
William
October 6, 2021
Is my model the same as the model that has a 5 at the end? For example "kp26m1xwh5" vs "kp26m1xwh" without the 5. Will parts be compatible between the two?
For model number KP26M1XWH
Fix.com logo
Hello William, Thank you for the question. The Internal part for KP26M1XWH5 and KP26M1XWH5 are the same. The 5 indicates Color of the appliance. We hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Duane
March 7, 2022
Model # KG25H7XOB 5QT S/N WR4452263. Is this the correct Worm Following Gear for our mixer? Manufacturer #W11086780. Thanks for your help.
For model number KG25H7X0B
Fix.com logo
Hello Duane, Thank you for contacting us. We have researched the model you have provided and have confirmed the part you are looking for is Fix Number: FIX12070620. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Hub Gear
★★★★★
★★★★★
(4)
$22.07
In Stock
Part Number: FIX12348886
This hub gear is a genuine OEM replacement part for your stand mixer. This kit includes both the beveled gear and attachment and is also referred to as a worm follower gear. This gear assists with the rotation of the pla...
Worm Gear
$48.07
In Stock
Part Number: FIX11747012
Sold individually.
Retaining Ring
$8.98
In Stock
Part Number: FIX11746917
Used on Stand Mixers.
Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Part Number: FIX1960673
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Produce Preserver Filter
$21.50
In Stock
Part Number: FIX3503014
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Part Number: FIX12345667
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Cooktop Cleaning Cream
$15.57
In Stock
Part Number: FIX12717774
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Cooktop Cleaner
$17.74
In Stock
Part Number: FIX3492527
Sold individually.
Affresh Cleaner
$19.09
In Stock
Part Number: FIX2367638
There are 6 tablets in each package and it is suggested to use every month. These keep the dishwasher fresh by dissolving and removing odor.
View More View Less
Hub Gear
$22.07
In Stock
Part Number: FIX12348886
Worm Gear
$48.07
In Stock
Part Number: FIX11747012
Retaining Ring
$8.98
In Stock
Part Number: FIX11746917
Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Part Number: FIX1960673
Produce Preserver Filter
$21.50
In Stock
Part Number: FIX3503014
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Part Number: FIX12345667
Cooktop Cleaning Cream
$15.57
In Stock
Part Number: FIX12717774
Cooktop Cleaner
$17.74
In Stock
Part Number: FIX3492527
Affresh Cleaner
$19.09
In Stock
Part Number: FIX2367638

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.0 / 5.0, 12 reviews.
  • 1
  • 2
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Bob from NORTH AUGUSTA, SC
Parts Used:
W11086780, WP9709511, WP9707223, WP9703438, W11192795, W11200218
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
The mixer would not spin.
Took the cover off of the transmission and replaced gears, pin and gasket and added new grease.
7 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
carol from whittaker, MI
Parts Used:
W11086780, WP9703680, W11192795
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
mixer skipped while turning
followed instructional video the hardest part was removing the snap ring! once that was removed it was a piece of cake!
7 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
michael from Bridgewater, NJ
Parts Used:
W11086780
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
The worm gear was skipping
I removed the 5 screws holding the cover. They were square but you can use a Phillips driver. Then I removed the cover on the transmission. All the gears have a place fairly easy to see where they all fit together. The only thing is there is a clip on the main shaft it will need to removed. If you don't have a clip spreader you'll need 2 screw drivers (flat ones). One to spread open the clip and one to slide up the clip take your time. There are two gears on top of each other. Remove the top gear set aside the bottom gear has a pin through the main shaft just pop it out set aside. Here is where the hammer comes in to play. Tap the shaft lightly while holding the mixer connector underneath. The gear is on the shaft snug. Now you'll have to remove the all the grease and replace with new grease. Install the new gear in reverse order. Then add the new grease. Take you time and clean the gasket on the transmission cover before you install it. Test before you install the cover. If all sounds good install the rest of the parts.
Read less
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dan from Forest Grove, OR
Parts Used:
WP9709231, W11086780, W11200218
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Damaged gears
Watched the video several times. Once I received the parts, I watched it again to see specific sections. Repair was easy when I knew what to expect. It would help if the video could be in sections, so you would not have to watch the entire beginning in order to see later instructions. Also found the parts manual on line and ordering of pa rts was very easy and processed correctly by your company. Really appreciated your help.
Read less
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Keith from HUTCHINSON, KS
Parts Used:
W11086780, WPW10170081, WPW10170080, WP9707223
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers
Mixer not turning
The reason I put very difficult and more than 2 hours is not because it is really difficult but because I still have not received the retaining pin from fix.com. We received the other three parts, but not the retaining pin, so I still can't complete the project. I emailed them to let them know 26 days ago, and they still have not responde d. You are not able to speak to anyone on the phone either. Extremely poor customer service!
Read less
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
lisa from SAINT HELENA, CA
Parts Used:
W11086780, WP9703680
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Stripped work gear- mixer wouldn't spin
Unplugged kitchen aide pro mixer
Used a square bit on drill to unscrew trim piece from mixer
Used same bit to remove top of mixer and again to expose the gears.
Used special pliers to remove the retaining ring.
Pulled off the top gear
Slid out a pin
Pulled off the worm gear
Replaced worm gear replaced pi n replaced top gear used pliers to replace retaining ring.
Reassembled the mixer with drill.
Read less
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
chris from PHILA, PA
Parts Used:
W11086780, WP9709511, WP9709231, WP9707223, WP9703680, W11192795
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Noise and no motion
1 Open case and get to the gear assembly 2 remove snap ring and remove gear
3 remove pin and remove and replace gear
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jim from Hudson Falls, NY
Parts Used:
W11086780
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
I stripped the worm gear by overloading the mixer with bread dough.
It is very easy to get the mixer housing apart by removing the screws. the gears and drive are easy to get at and see after the grease is removed. The drive assembly is held on the shaft with a snap ring that that must have a good set of snap ring pliers to remove. After removing the stripped gear it is just a mater of replacing it with the new one. It is easy to see what has to be done. I would like to thank this site for for the super fast service. Jim
Read less
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ken from Fallbrook, CA
Parts Used:
W11086780
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
Stripped gear
Steps: disassemble, clean, reassemble with new gear and new grease.

I used paint thinner to clean up and wash the old grease, kerosene would also be acceptable. In my case I used a solvent tank with a pump, since I have one, but it would have worked with solvent in a pan and a solvent brush. Then I let the cleaned parts dry ov ernight, though compressed air may have worked just as well.
Read less
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
William from Aledo, TX
Parts Used:
W11086780
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
I could not find in instructions what grease should be used.
Followed instructions
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
★ Customer Reviews
Average Rating: (3 Reviews)
5.0
★★★★★
★★★★★
Filter By Rating:
  • 5★
    3
  • 4★
    0
  • 3★
    0
  • 2★
    0
  • 1★
    0
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Araceli L - February 3, 2023
Verified Purchase
Mixer gear
Got my mixer up and running like new. I probably didn’t need to, but I changed out the worm gear and bearings as well. Also repacked with fresh grease. Was actually fun!
★★★★★
★★★★★
Stephen G - March 22, 2022
Verified Purchase
Perfect fit
High quality steel gear fit right into my KitchenAid mixer gearbox.
★★★★★
★★★★★
Lisle B - July 2, 2021
Verified Purchase
Great Place
They shipped within 2hours of my order. Got it right. Breath of fresh air.

Model Compatibility

This part works with the following models:
Fix Number: FIX12070620
Manufacturer Part Number: W11086780
Brand
Model Number
Description
KitchenAid
4KB25G1XBU3
Mixer
KitchenAid
4KB25G1XBU5
Mixer
KitchenAid
4KB25G1XBY5
Mixer
KitchenAid
4KB25G1XCO5
Mixer
KitchenAid
4KB25G1XER3
Mixer
KitchenAid
4KB25G1XER5
Mixer
KitchenAid
4KB25G1XGA5
Mixer
KitchenAid
4KB25G1XMC5
Mixer
KitchenAid
4KB25G1XMY5
Mixer
KitchenAid
4KB25G1XOB3
Mixer
KitchenAid
4KB25G1XOB5
Mixer
KitchenAid
4KB25G1XTG3
Mixer
KitchenAid
4KB25G1XTG5
Mixer
KitchenAid
4KB25G1XWW3
Mixer
KitchenAid
4KB25G1XWW5
Mixer
KitchenAid
4KD2661XMC3
Mixer
KitchenAid
4KG25G0XMC4
Mixer
KitchenAid
4KG25G0XWH4
Mixer
KitchenAid
4KG25G7XER4
Mixer
KitchenAid
4KG25G7XOB4
Mixer
KitchenAid
4KG25G7XSL4
Mixer
KitchenAid
4KG25G7XWH4
Mixer
KitchenAid
4KG25H3XER5
Mixer
KitchenAid
4KG25H3XOB5
Mixer
KitchenAid
4KG25H3XSL5
Mixer
KitchenAid
4KG25H3XWH5
Mixer
KitchenAid
4KN15C1XER1
Mixer
KitchenAid
4KN15C1XMC1
Mixer
KitchenAid
4KN15C1XOB1
Mixer
KitchenAid
4KN15C1XWH1
Mixer
Worm Following Gear
$ 18.28
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.