Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
Hub Gear W11192795
Works With Model KT2651XWW3!
$22.13
In Stock
- Fix Number:
- FIX12348886
- Manufacturer #:
- W11192795
- Manufactured by:
- Whirlpool
Works With Model KT2651XWW3!
- Product Description
- This hub gear is a genuine OEM replacement part for your stand mixer. This kit includes both the beveled gear and attachment and is also referred to as a worm follower gear. This gear assists with the rotation of the planetary assembly in the mixer. If the teeth of the gear have worn out, or nothing rotates when the mixer is turned on, you may need to replace the hub gear.
- Works with the following brands:
- KitchenAid, Whirlpool
- Works with the following products
- Mixer
- Fixes the following symptoms
- Touchpad does not respond
- Part# W11192795 replaces these:
- AP6286924, 115418-1, 4161404, 4161405, 4169868, 9703337, 9703338, W11044501, W11175144, WP9703337, WP9703338
Part Number Cross Reference
Product Description
This hub gear is a genuine OEM replacement part for your stand mixer. This kit includes both the beveled gear and attachment and is also referred to as a worm follower gear. This gear assists with the rotation of the planetary assembly in the mixer. If the teeth of the gear have worn out, or nothing rotates when the mixer is turned on, you may need to replace the hub gear.
-
Works with the following brands:KitchenAid, Whirlpool
-
Works with the following products:Mixer
-
Fixes the following symptoms:Touchpad does not respond
-
Part# W11192795 replaces these:AP6286924, 115418-1, 4161404, 4161405, 4169868, 9703337 ... Show more , 9703338, W11044501, W11175144, WP9703337, WP9703338 Show less
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts Additional or alternate parts to consider.
View More
View Less
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
mixer skipped while turning
followed instructional video the hardest part was removing the snap ring! once that was removed it was a piece of cake!
14 of 14 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The mixer would not spin.
Took the cover off of the transmission and replaced gears, pin and gasket and added new grease.
7 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The Bevel Gear had stripped several teeth off
1.Remove Mixer top (4 screws) 2.remove gear case cover (4 screws) 3. Remove old retaining ring 4. Lift old bevel gear from shaft. 5. Remove retaining pin from shaft and drop shaft out bottom 6. Remove ALL old grease making sure to get all metal pieces from old bevel gear. 7. inspect all gears for damage 8. replace shaft and retai
... Read more
ning pin 9. Place new bevel gear onto shaft and secure with retaining ring 10 Install new grease liberally 11. replace gear cover case and secure with 4 screws 12. Replace case top and secure with 4 screws
Read less
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noise and no motion
1 Open case and get to the gear assembly 2 remove snap ring and remove gear
3 remove pin and remove and replace gear
3 remove pin and remove and replace gear
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Accessory input port striped. Not driving attachment.
Problem found is plastic transmission cover cracked causing too much play between gears causing them to skip and strip. New replacement cover is cast metal. Great improvement. Remove trim ring (one screw). Remove top cover (4 screws). Remove plastic transmission cover (4 screws). Remove snap rin
... Read more
g that holds too beveled gear. Replace gear and re install snap ring. Replace gear in transmission (other beveled gear) I also replace bronze bushings at each end of the adjacent worm gear. Re pack all gears and transmission cover with fresh grease. Reinstall all gears and transmission cover. Ensure all components are properly seated and lined up. Re instal cover and trim ring. Easy fix. Less than an hour. Works as good as new. Replacement parts fit perfectly.
Read less
0 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bevel gear broke
Took it apart. Saw the broken gear. Got online and ordered the parts and completed the repair as soon as the parts came.
0 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
★
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
SAM L - December 5, 2022
Verified Purchase
Mixer Fixed!
I purchased a complete set of replacement gears for my Kitchen Aid mixer using the parts guide on the site. All parts arrived promptly, packaged well, and fit correctly. Repair was simple and straightforward, I recommend paying close attention to the assembly order during disassembly to assist in the reassembly. No lube available :(, so I ordered food grade grease from the "big A". All told, I am back and running, making bread and mixing dough just like before. Much, much, cheaper than a new mixer!! Thanks you Fix.com!!
Francis V - September 24, 2020
Verified Purchase
just what i needed.
i was making a batch of dough too big for my kitchen aid and blew out these two gears- they fit and worked properly, and the service was excellent. received my parts in a few days without any problems.
Indira A - June 13, 2020
Verified Purchase
works
After removing the old grease (contaminated with metal chunks and particles) replacing the gear and using new grease, it runs like new. I assume the gears were cut well because it is just as quiet as when it was new.
Paul S - April 29, 2020
Verified Purchase
Oh Gear
Perfect replacement part, the repair was easy to do and shipping was fairly fast. I got the part number from the damaged gear and found the part online. Will use fix.com again if I need a repair part. First time satisfied customer.
Model Compatibility
This part works with the following models:
Fix Number: FIX12348886
Manufacturer Part Number: W11192795
Manufacturer Part Number: W11192795
Brand
Model Number
Description
✖
Mail-In Recycling Rebate