We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Vicki
July 11, 2022
The door handle has broken off in places. Screws are coming out and handle is loose. Can’t figure out how handle comes off ?
For model number MH7155XMSO
Hello Vicki, thank you for your question. You will need to remove the plastic lining around the inside of the door. There are retainer clips holding the liner in place and you will need to use a putty knife to remove it. Depending on the type of microwave you have, you may have to come in from the bottom or from the top to remove the lining. Gently slide the putty knife in between the lining and the frame and go around the frame and gently pry it loose. On the hinge side you will need to come in from the backside to pry the lining off. If after you remove the lining you only see 2 screws, unthread them to see if the handle will come off. If it does not come off, you will have to remove the inside door panel in the same way you removed the lining. Once removed, unthread the remaining 2 screws and remove the old handle. Install the new door handle and reinstall both the inner door panel and the lining. Restore power to the microwave and everything should now work for you. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Was this helpful?
Thank you for voting!
Related Parts Additional or alternate parts to consider.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Old door handle was broken and needed replacement.
1. There are three screws in the side of the door facing you. Open the door and remove them. 2. The really tricky part is removing the metal and grey plastic door frame. Once the three screws are removed, the metal/plastic door frame will separate from an inner, black plastic door. It may seem like the metal and grey plastic frame are sep
... Read morearate parts but they're not -- the metal/grey plastic door frame is a single piece (this was what was surprising to me). Very carefully pry the metal/grey plastic frame from the inner, black plastic door. Eventually the whole metal/grey plastic door frame assembly will pop away from the black plastic inner door. 3. Once you've removed the metal/grey plastic frame, the screws holding the handle are exposed and can simply be removed and the handle replaced. NOTE: Be very careful in tightening the screws holding the handle; tighten them too tightly and they can break the handle.
Take out three screws on inside edge of door, gently pry off outer skin and set aside glass and frame. I should be good at this because I've done it three times now. For some reason the new handles break off inside the screw holes. I am going to try JB Weld this time and use longer screws - going to measure the hole in handle for the long
... Read moreest screw possible. Maybe more threads in the handle and glue will keep it from breaking on the third replacement.
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.