Lawn Boy Parts

Fix Number

FIX11804777

Manufacturer Part Number

131-4547-03

This is a genuine OEM replacement blade for use on Lawn Mowers. If the blade is too dull it will tear the grass instead of an even cut. A bent or damaged blade can cause serious damage or injuries. You can use this blade with the Recycler Cutting System to chop grass clippings into fine mulch particles and return them to the ground.

★★★★★

★★★★★

1 Review

Fix Number

FIX9056413

Manufacturer Part Number

66-7460

Genuine Toro replacement part, this item is sold individually. By pressing the 66-7460 Primer Bulb (a recommended 3-4 times), fuel will be forced from the float bowl into the throat of the carburetor; this will allow the engine of the snowthrower model numbers below to start.

★★★★★

★★★★★

1 Review

Fix Number

FIX9048394

Manufacturer Part Number

614426

This is an Original Manufacturer Sourced Stepped Washer used on a variety of Push Lawn Mowers. This is the Metal Washer that fits with Rear or Front Wheel Cover depending on the model. It helps secure the wheel on an Axle with a bolt.

Fix Number

FIX16666051

Manufacturer Part Number

144-4105

Fix Number

FIX9046634

Manufacturer Part Number

614650

Genuine Manufacturer Approved replacement part designed for use with some Lawn and Garden Equipment. This part is made out of Metal and it is Sold Individually. Bolt is 3/8-16 X 3-5/8. It is commonly used to keep the wheel in place. Wrench needed for installation.

Fix Number

FIX10036953

Manufacturer Part Number

98079-56846

This is a genuine OEM Honda replacement part. Spark plugs are used to take energy from the battery to create and electric spark that spark is used to ignite the air fuel mixture in your small engine. Spark plugs are commonly used in of a number of small engines such as lawn mowers generators snow blower trimmers augers etc. It is recommended that you inspect your spark plug while you are doing regular maintenance so you can clean and change the part when necessary. If you don?t replace it often enough you may have trouble starting the engine or it may run rough. To install this part you will need a spark plug socket.

★★★★★

★★★★★

2 Reviews

Fix Number

FIX12116618

Manufacturer Part Number

136-5923-05

This is a high-quality replacement for a damaged or a missing lower handle for the left side. To ensure the correct repair procedure, refer to the diagrams for your specific model. This handle-lower is made of durable metal and is sold as an individual item. Note, the hardware to secure it is sold separately. It is supplied by the original equipment manufacturer for Lawn Boy lawn mowers. Replacing this component is a simple task that should only require a wrench.

Fix Number

FIX9052921

Manufacturer Part Number

65-2720

This authentic component is an OEM part which is designed for use with Toro snowthrowers. It helps to secure a part on a shaft. This is an identical replacement for a damaged or a faulty hardware that was installed on a new unit. Keep in mind this high-quality ring-retaining is made of durable metal and is sold individually. Make sure to check the appropriate diagrams of your model for the exact location and the correct installation of this component. It is best to use snap-ring pliers to secure and remove it.

Fix Number

FIX9885938

Manufacturer Part Number

125-2466

This authentic OEM sourced replacement bolt is generally used on Toro lawn mowers. The purpose of this bolt is to secure the cutting blade to the blade driver assembly. This is a hex head bolt which is sold individually. It includes a metal washer. Please note you would need a wrench to replace this blade bolt.

★★★★★

★★★★★

1 Review

Fix Number

FIX9153010

Manufacturer Part Number

91-2258

This part includes one V-belt for a lawn mower. It measures approximately 35-inches long and 3/8-inches wide. This drive belt is part of the blade and transmission assembly. The belt can become worn and start to fray or crack over time and will require replacement. To ensure your new belt performs properly and last longer, clean the pulley before installation.