OEM Tanaka Trimmer Parts & Accessories

Gasket-Oil Tank

$5.95

Fix Number: FIX11846515
Manufacturer Part Number: 6699566

Spring-clutch

$5.95

Fix Number: FIX9992301
Manufacturer Part Number: 6689434

This is an authentic replacement part which is manufactured for use with Tanaka handheld outdoor power equipment. The clutch along with the clutch drum allow a machine to idle without moving the drive shaft. When the throttle is engaged the clutch expands into the clutch drum which turns the drive shaft. If the clutch spring fails the clutch will not engage the drum and driveshaft, so the engine will run, but the machine will not move. To ensure the correct repair procedure, check the diagrams for your model. Keep in mind this high-quality spring-clutch is made of durable metal and is sold as an individual item.

Insulator Set

$12.67

Fix Number: FIX9992522
Manufacturer Part Number: 6689924

This is a genuine Tanaka replacement part that has been sourced from the original manufacturer to be used with small engines. The insulator set is used to provide spacing between the carburetor and the engine's intake. This item is available as an individual replacement part.

Ball Bearing 6002ddwcmps2l

$16.35

Fix Number: FIX9984742
Manufacturer Part Number: 6002DD

This is a genuine replacement part sourced from the original manufacturer for use with power tools and small engines. Metal ball bearings are commonly used to reduce friction between a rotating shaft and a fixed part assembly. This bearing is compatible with several different types of equipment and its application can vary based on the model. The bearing is sold individually.

Fuel Pipe 3x5x190

$6.51

Fix Number: FIX9995297
Manufacturer Part Number: 6696160

This fuel line/pipe is a genuine manufacturer approved replacement part. It is commonly used with Tanaka gas powered engines. The fuel line is what delivers the fuel from the fuel tank into the carburetor. Over time it will deteriorate, become brittle and may crack. This item is made out of flexible plastic material and it is sold individually.

Fuel Line

$6.51

Fix Number: FIX11911591
Manufacturer Part Number: 6698716

This is an OEM fuel line and it is sold independently. The fuel line connects to the fuel filter, located inside the fuel tank. The fuel travels through the fuel line to the carburetor when the primer bulb is pushed (fuel tank grommet is sold separately). Due to its constant contact with fuel, it tends to deteriorate over time and will require replacement from time to time.

Clutch Spring

$6.51

Fix Number: FIX9990227
Manufacturer Part Number: 6684644

This authentic part is supplied by the original equipment manufacturer for use with Tanaka and Hitachi equipment. The spring is utilized to apply tension to the clutch mechanism. Unfortunately, over time it will wear out and it may begin to stretch eventually requiring a replacement. This high-quality spring is made of durable metal and is sold as an individual item. Check the diagrams for your model to ensure the proper repair procedure. A wrench set, a screwdriver, and pliers might be needed to replace this clutch spring.

Purge Bulb

$9.04

Fix Number: FIX8857246
Manufacturer Part Number: 12318139130

This is a genuine OEM replacement part, it is sold individually. By pressing the bulb, It will purge all of the air out of the carburetor. Then fuel will come up from the fuel tank through the fuel line then into the carburetor. Then the excess fuel will be forced back into the fuel tank through the fuel return line. At some time the primer will lose its elasticity or crack and need to be replaced. We have an article and video on How to Replace a Primer Bulb, in our Repair Center. That can be found on the front page of our site.

Installation Instructions

james from Irving, TX

Purge Bulb Replacement

it took 5 min to replace and it started up first pull. Good place to buy parts shipped and received 3 day later. Read more...

Chain-tank Cap

$6.40

Fix Number: FIX9990210
Manufacturer Part Number: 6684625

Hex. Bar Wrench 4mm

$6.51

Fix Number: FIX10033827
Manufacturer Part Number: 944458

This is a genuine OEM sourced replacement part which is specially designed for use with Hitachi and Tanaka power tools. It is an identical replacement for a missing or faulty hex bar wrench that was originally included with a new unit. Please note this high-quality component is made of durable metal and is sold individually.

Tanaka Trimmer Parts

Popular Tanaka Trimmer Parts

Installation Instructions

Tanaka Trimmer Appliance Types

Related Tanaka Trimmer Parts

Popular Tanaka Trimmer Models

Tanaka Trimmer Parts

Start With Your Model Number

Popular Tanaka Trimmer Parts

Installation Instructions

Tanaka Trimmer Appliance Types

Related Tanaka Trimmer Parts

Popular Tanaka Trimmer Models