Snapper Trimmer Hardware

Fix Number

FIX9999668

Manufacturer Part Number

703409

This nut is mostly used in lawn tractors and snow blowers and is in different locations in the machine, depending on snowblower. It is made from metal and measures to 5/16 inches for the diameter and a thread count of 18. Tip: Remember there are different nuts used in the machine, be sure you are ordering the correct part. The tool needed for this repair is a wrench. *Please note: this part is sold individually. Refer to the diagram provided by the manufacturer for instructions.

Fix Number

FIX9434260

Manufacturer Part Number

530015805

Fix Number

FIX9284979

Manufacturer Part Number

530015793

An authentic manufacturer sourced replacement part that is specially produced for use with handheld lawn and garden equipment. This flange nut is used to secure the edger blade to the spindle. Please note this hardware is sold individually.

Fix Number

FIX9999594

Manufacturer Part Number

703297

The retainer attaches to the idler arm support. This genuine item is supplied by the original equipment manufacturer for use with tractors and rear engine riders made by Snapper, Murray, and Simplicity. It is made out of metal and is sold individually. During the installation process, a wrench set might be needed to replace this part. Over time this part may break and will need to be replaced.

Fix Number

FIX9003473

Manufacturer Part Number

530015162

It is a genuine item that is supplied by the original equipment manufacturer for handheld lawn and garden equipment. The wrist pin retainer is an important component which helps to secure the piston pin. If the part is missing or is damaged, this will provide an identical replacement for the original component that was installed on a new unit. Note, this high-quality wrist pin retainer is made of durable metal and is sold as an individual item. Keep in mind, the pin is all sold separately. A screwdriver, a wrench set, and pliers will be needed to perform this repair. To ensure the correct replacement procedure, refer to the appropriate diagrams for your model.

Fix Number

FIX16404026

Manufacturer Part Number

703798

This is an original manufacturer supplied replacement bolt designed for use with Snapper lawn mowers. It is generally used to secure wheel brackets to the deck. It is designed with a square area under bolts head which allows it to stay in place while the lock nut (sold separately) is being tightened. Please note this bolt is sold individually.

Fix Number

FIX16352363

Manufacturer Part Number

530016386

This is a genuine OEM sourced replacement tapping screw which is specially designed for use with Paramount and Poulan lawn and garden equipment. It is a standard hardware which has multiple applications depending on the model of your unit, please make sure to refer to the appropriate diagrams for the correct location and application of this part. This high-quality hex socket head screw is made of durable metal and it is sold individually.

Fix Number

FIX9005737

Manufacturer Part Number

530015820

This is a genuine replacement part sourced from original manufacturer. It is designed for use with string trimmers. This bolt has multiple uses, however most commonly it is used to secure the auxiliary handle and the deflector shield of trimmers. Includes one (1) hex head bolt per order. Please note you would use a wrench to install or remove it.

Fix Number

FIX10000343

Manufacturer Part Number

704210

This metal carriage bolt is a genuine Craftsman replacement part. This item was designed for use with the snowblowers listed below and is used to safely secure the discharge chute. It is an identical replacement for a missing or damaged bolt that originally came with a new unit. Please make sure to check the appropriate diagram for your model for the correct location and application of this hardware. This item is sold individually.

Fix Number

FIX9999626

Manufacturer Part Number

703350

This is a washer for various lawn and garden equipment. It is a flat washer and requires a 5/16-inch bolt size. Washers are positioned under the head of a nut or bolt to strengthen the connection of two or more parts.