Shindaiwa Trimmer Hardware

Shindaiwa Appliance Parts

Popular Shindaiwa Trimmer Hardware

Fix Number
FIX8859978
Manufacturer Part Number
13211546730
This is a fuel line grommet, and it is used with various lawn and garden equipment. This part prevents leaking fuel and fumes. The grommet is placed in the fuel tank to seal the opening area where the fuel line and the fuel tank connect. A worn grommet is a safety hazard because it will cause fuel to leak from the tank. We recommend when replacing it to also replace the fuel line. Before starting this repair make sure to drain the fuel from the tank, and remove the spark plug.
Fuel Line Clip
$6.25
In Stock
Fix Number
FIX10053748
Manufacturer Part Number
V490001230
This is a clip for a variety of lawn and garden equipment. The clip is made of a durable metal, and is 6.5mm in diameter. This part is most commonly used to clamp tubes and hoses in place. The clip is sold individually.
Thumbscrew
$6.25
In Stock
Fix Number
FIX12089585
Manufacturer Part Number
V299000640
Nut
$6.25
In Stock
Fix Number
FIX8969875
Manufacturer Part Number
43302206460
This is a Genuine OEM replacement part, this item is sold individually. This nut is used on a variety of lawn and garden equipment. Use proper tools tighten or loosen this part. Make sure to tighten the nut, but do not over tighten it.
Eyelet
$6.25
In Stock
Fix Number
FIX9109517
Manufacturer Part Number
72005-92630
This part includes one OEM eyelet for a trimmer. Please note that your spool housing will have two of these eyelets, so please order the amount required. The eyelet is in the main housing for the spool. This housing is the part of the trimmer that is attached to the gear box. It accepts the line spool, and the eyelets are where the trimmer line passes through. The eyelets can become worn and will sometimes come loose and can get lost, requiring replacement. This is a very straightforward repair that should only take a few minutes.
Trimmer Nut
$6.25
In Stock
Fix Number
FIX9148697
Manufacturer Part Number
90050000005
This nut is used for a variety of handheld gardening tools. The nut has multiple applications depending on the tool you are using. Refer to the diagram provided by the manufacturer for installation instructions and nut location in a specific tool. This lock nut is used to resist loosening when threaded onto a bolt. *Please note: this part is sold individually. The measurements are: 5mm.
Screw
$6.25
In Stock
Fix Number
FIX9323037
Manufacturer Part Number
V804000060
It is an authentic OEM sourced item that is specially produced for use with Shindaiwa and Echo handheld lawn and garden equipment. This screw is generally used to secure the housing, please make sure to check appropriate diagrams for correct location and use of this hardware. One torx screw is included per order.
Clip
$6.25
In Stock
Fix Number
FIX9238696
Manufacturer Part Number
V490000500
This clip fits lawn and gardening tools. The clip secures the fuel filter to the fuel line on the unit. *Please note: the clip is sold separately. Refer to the manual provided by the manufacturer for further installation instructions.
Nut
$6.25
In Stock
Fix Number
FIX9150910
Manufacturer Part Number
90051300010
This is an original manufacturer approved replacement item commonly used on trimmers, brushcutters and edgers. The purpose of this nut is to secure cutter head assembly to the spindle/shaft of a trimmer. It is a metal nut which is sold individually. Please only use properly sized wrench when securing or removing this nut.
Screw
$6.25
Special Order
Fix Number
FIX9153138
Manufacturer Part Number
90023805016
This is a genuine OEM sourced replacement part designed for use with Echo blowers/trimmers. This is a standard hardware which has multiple applications based on your unit. Please refer to diagrams for proper application. This screw is made out of metal and it is sold individually. To remove or install this screw you would need a screwdriver.

Related Shindaiwa Trimmer Parts