Shindaiwa Timmer Parts

This is a primer pump or primer bulb, and it is used on various outdoor lawn equipment. This part has an outer diameter of 0.616 inches, it is dome shaped, and transparent. The primer pump gives the engine of your machine a faster start by pulling fuel into the carburetor. If your pump is malfunctioning your machine will not receive the fuel it needs to operate properly. If you notice the primer pump is leaking you must replace it, as it could become dangerous.

This nut is used for a variety of handheld gardening tools. The nut has multiple applications depending on the tool you are using. Refer to the diagram provided by the manufacturer for installation instructions and nut location in a specific tool. This lock nut is used to resist loosening when threaded onto a bolt. *Please note: this part is sold individually. The measurements are: 5mm.

This clip fits lawn and gardening tools. The clip secures the fuel filter to the fuel line on the unit. *Please note: the clip is sold separately. Refer to the manual provided by the manufacturer for further installation instructions.

This gasket fits lawn and garden equipment. It provides a seal for the gas cap. With use, the seal can wear off and become compressed. In this case, it is best to replace the gasket. *Please note: this part is sold individually. No tools needed are needed to replace this gasket, simply remove the old one and place a new gasket inside the fuel cap.

This is a breather for your lawn equipment. The breather allows air to enter the fuel tank, but will not let the fuel or emissions escape. It is essentially a valve for your tank. This part is connected to the fuel line, and is made of plastic. Eventually this part will wear, depending on your usage. When that happens, you should replace it to avoid fuel and fuel emissions from leaking out of your machine.