OEM DeWALT Trimmer Parts & Accessories

Brush Pair

$17.72

Fix Number: FIX10189222
Manufacturer Part Number: N381708

This is an authentic DeWalt replacement part that has been sourced from the original manufacturer to be used laminate trimmers. The brushes fit into the motor housing. The brushes are used to relay electricity from the switch to the motor's armature assembly. The brushes are sold as a pair.

Replacement Spool

$42.25

Fix Number: FIX11928779
Manufacturer Part Number: 90599025

This is a genuine OEM sourced part used on the DeWalt DCST990M1 (Type 1) 40V 15" String Trimmer. The plastic and metal replacement spool is fastened to the gearcase assembly at the base of the trimmer. This item houses and dispenses the cutting line for trimming grass. A screwdriver is needed for the installation, and the replacement spool is sold individually.

Carbon Brush With Wire Lead An

$6.51

Fix Number: FIX10170841
Manufacturer Part Number: 387558-01

Genuine DeWalt replacement part. rnIncludes 1 Carbon Brush with wire lead and terminal in rubber sheath attached.rnrn • Worn brushes are frequently the cause of a poorly running motor. • Replacing brushes can fix an intermittently operating motor. • New brushes can restore a motor's electric braking. Carbon motor brushes are one of the most commonly replaced power tool parts. The reason is that carbon brushes are wear items, meaning that through friction and use they will gradually wear away and eventually will need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, also check your armature for burns, cracks, or other damage which are indications of a larger motor problem needing attention.

Cam

$6.51

Fix Number: FIX12677597
Manufacturer Part Number: 753-08004

Clutch Asm Small

$37.28

★★★★★

1 Review

Fix Number: FIX9303676
Manufacturer Part Number: 753-05860

Genuine OEM replacement kit used on Gas Trimmers and Tillers. This part includes: Clutch Drum, Clutch, Clutch Washer and the Screw which has a left-handed thread. A centrifugal clutch is a part that uses centrifugal force to connect two concentric shafts, with the driving shaft nested inside the driven shaft. Today's centrifugal clutches will function even when they shouldn't, far beyond the point of when they need to be replaced. Keeping an eye on equipment performance will determine when the centrifugal clutch requires attention.

Fixes these symptoms

Engine revs but trimmer head will not turn
See more...

Installation Instructions

Gerald from CHATTANOOGA, TN

Quit driving head

Remove handle with trigger from shaft. Remove shaft from engine. Remove spark plug. Insert small rope into cylinder ( to stop shaft from turning. Remove small screw from end of clutch cover and remove cover. Unscrew clutch assembly ( note Direct on assembly). Assemble new clutch in reverse. Read more...

Ball Bearing

$6.61

★★★★★

1 Review

Fix Number: FIX10180918
Manufacturer Part Number: 605040-65

If your tool is making a squeaking or squealing sound, a worn bearing is a likely cause. Bearings are designed to lessen the friction between moving parts, so they are prone to deterioration over the life of your equipment. This part includes one OEM ball bearing which is sealed on both sides. Installation may vary depending on the model-type, but in general, this should be a quick and easy repair that can be easily done yourself.

Spark Plug

$11.59

Fix Number: FIX10009739
Manufacturer Part Number: 753-06847

This is a genuine OEM sourced part which is specially made for use with Craftsman handheld lawn and garden equipment. Its purpose is to deliver electric current from the ignition system to the combustion chamber. It will ignite the air fuel mixture by the spark. Unfortunately, over time a spark plug can wear out or it may get damaged eventually requiring a replacement to ensure peak performance. Keep in mind this high-quality spark plug is made of durable materials and is sold individually. Please make sure to refer to the owners manual of your model for the correct location and application of this component.

BRUSH ASSEMBLY

$13.35

Fix Number: FIX12508376
Manufacturer Part Number: N031636

This OEM part includes one carbon brush in metal housing. A worn or damaged brush will lead to motor issues and should ideally be replaced before this happens. It is a good idea to continue to inspect the brushes and replace as soon as they appear tarnished in any way. This is also an opportune time to inspect the armature for burns or cracks.

GEAR CASE COVER

$44.96

Fix Number: FIX12526038
Manufacturer Part Number: N531551

Carburetor Gasket

$6.51

Fix Number: FIX9119051
Manufacturer Part Number: 753-06253

This is an authentic Craftsman replacement part that has been sourced from the original manufacturer to be used with trimmers and blowers. The gasket is used to seal the connection between the carburetor and the air cleaner assembly. It is recommended to replace gaskets when servicing the motor to ensure proper seals when the parts are reassembled. This item is available as an individual replacement part.

DeWALT Trimmer Parts

Popular DeWALT Trimmer Parts

Installation Instructions

DeWALT Trimmer Appliance Types

Popular DeWALT Trimmer Models

DeWALT Trimmer Parts

Start With Your Model Number

Popular DeWALT Trimmer Parts

Installation Instructions

DeWALT Trimmer Appliance Types

Popular DeWALT Trimmer Models