Cub Cadet Trimmer Parts

Start With Your Model Number

Need help finding your model number?

Find Parts Fast

Guaranteed Fit

Repair Videos

Popular Cub Cadet Trimmer Parts

Left Hand Cutting Head Assembly

$31.09

In Stock

Add to cart

Fix Number

FIX16445065

Manufacturer Part Number

841-032392S

Fuel Tank Asm

$29.03

In Stock

Add to cart

Fix Number

FIX9118306

Manufacturer Part Number

753-06250

This is a genuine part that is supplied by the original manufacturer for use with Craftsman trimmers. The fuel tank stores the gasoline used to power the trimmer. This part is made of plastic and is sold individually. The fuel cap and fuel lines are all included in this kit. For this repair, you will need a screwdriver to remove any panels or covers, a pair of needle nose pliers, and a socket wrench to aid you.

Head Fixed Line Bt

$6.85

In Stock

Add to cart

Fix Number

FIX10009817

Manufacturer Part Number

753-08170

This authentic component is supplied directly from the original equipment manufacturer for use with MTD string trimmers. It is an identical replacement for a missing or a faulty glide cap that was installed on a new unit. The cap is secured on the bottom of the cutting head assembly, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this part. Keep in mind this high-quality item is made of durable plastic and is sold individually.

Trimmer Bump Head Knob

$18.38

In Stock

Add to cart

Fix Number

FIX9306452

Manufacturer Part Number

791-153066B

This bump knob assembly fits lawn and gardening tools, usually trimmers. This part bumps on the ground to advance the cutting line from the spool. With time and use, this part can wear out easily. It is recommended to order an extra knob assembly to always have on hand. Refer to the manual provided by the manufacturer for installation instructions and safety practices.

Fixes these symptoms

• Cutting line does not come out
• See more...

Fuel Tank Assembly

$18.85

In Stock

Add to cart

Fix Number

FIX9118299

Manufacturer Part Number

753-06183

This is an authentically sourced fuel tank assembly, including the fuel lines, fuel cap, fuel filter, and screws needed for assembly. This fuel tank assembly is for trimmers, and is where the fuel is filtered and stored for use with the engine. Due to its constant contact with fuel, especially if fuel has been left it in for extended periods of time, it may crack, in which case it should be replaced immediately. Leaking gas is very dangerous, so it is important that it get fixed quickly. Before beginning this repair, drain the gas from the tank before installing the new one.

Fixes these symptoms

• Will Not Start
• See more...

SPARK PLUG 4 CYCL

$10.49

On Order

Add to cart

Fix Number

FIX19298356

Manufacturer Part Number

794-00082

Clutch Asm Small

$33.95

In Stock

Add to cart

★★★★★

★★★★★

1 Review

Fix Number

FIX9303676

Manufacturer Part Number

753-05860

Genuine OEM replacement kit used on Gas Trimmers and Tillers. This part includes: Clutch Drum, Clutch, Clutch Washer and the Screw which has a left-handed thread. A centrifugal clutch is a part that uses centrifugal force to connect two concentric shafts, with the driving shaft nested inside the driven shaft. Today's centrifugal clutches will function even when they shouldn't, far beyond the point of when they need to be replaced. Keeping an eye on equipment performance will determine when the centrifugal clutch requires attention.

Fixes these symptoms

• Engine revs but trimmer head will not turn
• See more...

Installation Instructions

Gerald from CHATTANOOGA, TN

Quit driving head

Remove handle with trigger from shaft. Remove shaft from engine. Remove spark plug. Insert small rope into cylinder ( to stop shaft from turning. Remove small screw from end of clutch cover and remove cover. Unscrew clutch assembly ( note Direct on assembly). Assemble new clutch in reverse. Read more...

Fuel Tank Asm

$28.97

On Order

Add to cart

★★★★★

★★★★★

1 Review

Fix Number

FIX11812933

Manufacturer Part Number

753-06797

This is an authentic part that is supplied directly from the original equipment manufacturer for Craftsman trimmers. The fuel tank houses the fuel used to power the machine. This part is made of hard plastic and is sold individually. The fuel cap and fuel lines are included in the assembly. For installation you will need a screw driver to remove and shrouds and covers.

Fixes these symptoms

• Will Not Start
• See more...

Trimmer Carburetor

$45.02

In Stock

Add to cart

Fix Number

FIX9119300

Manufacturer Part Number

753-06190

A carburetor basically consists of an open pipe through which the air passes into the inlet manifold of the engine. The pipe is in the form of a Venturi: it narrows in section and then widens again, causing the airflow to increase in speed in the narrowest part. Below the Venturi is a butterfly valve called the throttle valve ' a rotating disc that can be turned end-on to the airflow, so as to hardly restrict the flow at all, or can be rotated so that it (almost) completely blocks the flow of air. This valve controls the flow of air through the carburetor throat and thus the quantity of air/fuel mixture the system will deliver, thereby regulating engine power and speed. The throttle is connected, usually through a cable or a mechanical linkage of rods and joints. Fuel is introduced into the air stream through small holes at the narrowest part of the Venturi and at other places where pressure will be lowered when not running on full throttle.

Fixes these symptoms

• Engine stops after a few seconds or minutes
• Will Not Start
• See more...

Carburetor Gasket

$6.51

In Stock

Add to cart

Fix Number

FIX9119051

Manufacturer Part Number

753-06253

This is an authentic Craftsman replacement part that has been sourced from the original manufacturer to be used with trimmers and blowers. The gasket is used to seal the connection between the carburetor and the air cleaner assembly. It is recommended to replace gaskets when servicing the motor to ensure proper seals when the parts are reassembled. This item is available as an individual replacement part.

Cub Cadet Trimmer Appliance Types

• Trimmer Parts
• Cub Cadet Parts

Related Cub Cadet Trimmer Parts

• Cub Cadet Trimmer Caps and Lids
• Cub Cadet Trimmer Carburetors
• Cub Cadet Trimmer Control Cables
• Cub Cadet Trimmer Handles
• Cub Cadet Trimmer Hoses and Tubes
• Cub Cadet Trimmer Seals and Gaskets
• Cub Cadet Trimmer Springs and Shock Absorbers
• Cub Cadet Trimmer Wire Plugs and Connectors

Popular Cub Cadet Trimmer Models

• 100 ((25A-262J756)(2014)) St 25A-262J756 Wheeled String Trimmer
• 100 ((25A-262J710)(2014)) St 25A-262J710 Wheeled String Trimmer
• ST100 ((25A-262J710)(2015)) 25A-262J710 Wheeled String Trimmer
• ST100 ((25A-262J756)(2015)) 25A-262J756 Wheeled String Trimmer
• ST100 (2017) 25A-262J709 Wheeled String Trimmer
• BC490 (41BD490C912) Bc490 41bd490c912
• BC490 (2014) Cub Cadet String Trimmer Model BC490/2014 Parts
• BC490 ((41AD490C912)(2015)) 41AD490C912 Gas String Trimmer
• BC280 ((41ADZ28C912)(2015)) 41ADZ28C912 Gas String Trimmer
• BC280 (2014) Cub Cadet String Trimmer Model BC280/2014 Parts
• SS270 (2014) Cub Cadet String Trimmer Model SS270/2014 Parts
• SS270 ((41ADZ27C812)(2015)) 41ADZ27C812 Gas String Trimmer
• SS270 ((41ADZ27C912)(2015)) 41ADZ27C912 Gas String Trimmer
• SS470 ((41ADZ47C812)(2015)) 41ADZ47C812 Gas String Trimmer
• SS470 (2014) Cub Cadet String Trimmer Model SS470/2014 Parts
• SS470 ((41ADZ47C912)(2015)) 41ADZ47C912 Gas String Trimmer
• 604 ((248-604-100)(1988)) Edger
• 604 ((247-604-100)(1987)) Edger
• 604 ((249-600-100)(1989)) Edger
• 604 ((246-604-100)(1986)) Edger