Trimmer Blades

Fix Number

FIX9129938

Manufacturer Part Number

781-0080-0637

This edger blade is an OEM part direct from Craftsman for edgers. This part connects to the drive shaft to edge and cut grass. It is recommended to review your models diagram to verify the parts compatibility. You will need a wrench to replace this part. This edger blade is made of metal and sold individually.

Fix Number

FIX11925341

Manufacturer Part Number

243801-00

This is a genuine replacement Blade for the Black and Decker Edgers shown below. This is a new style Blade for these edgers. If this is the first time you have used this new Blade, you will need to order two of the part number 243797-00 Washers for this new Blade. Or you can order part number EB-007AL 7 1/2" Blade (Includes 2 Washers).

Fix Number

FIX16352908

Manufacturer Part Number

530095086

This is a genuine Weed Eater replacement part, it is sold individually. This blade is used on all of the edgers shown below. Its dimensions are 8-3/8 inches long and 1-1/2 inches wide. This blade when in use will hit concrete, rocks and other debris, which will shorten the blade. It is advised to keep one blade on hand.

Fix Number

FIX16435402

Manufacturer Part Number

781-0748-0637

This is a genuine replacement part sourced directly from the manufacturer. The blade is found on Craftsman edgers. This part is made of metal, and is used to cut through turf to create a clean edge for lawns and flower beds. You will require a wrench when replacing this part. This item is sold individually.

Fix Number

FIX18787410

Manufacturer Part Number

638016003

This is a cut-off blade for the line of string that extends from compatible trimmer models. This blade rotates quickly during use of the trimmer to remove excess string from the trimmer line, ensuring that the string supplied through the trimmer head remains at an ideal length. Constructed from high-quality steel, this cut-off blade is a genuine OEM part sold individually, without any additional accessories or securing hardware. Due to its frequent use and sharp nature, it can naturally dull over time and with extended use. If you notice any damage, warping, bending, or signs of corrosion on the blade, it is advisable to replace it to maintain the proper cutting performance of your trimmer. Replacing this cut-off blade is a simple process. Locate it on the trimmer head, remove the existing mounting screws, and install the new cut-off blade, securing it in place with the same mounting screws. This replacement will help ensure that your trimmer cuts properly and efficiently.

Fix Number

FIX9066006

Manufacturer Part Number

69601552632

This is a genuine manufacturer sourced replacement part. It is specially designed for use with Shindaiwa and Echo trimmers/edgers. These blades are perfect for edging level ground around sidewalks and driveways. Includes two (2) metal blades per order. To replace it you would need a wrench to remove the blade nut.

★★★★★

★★★★★

1 Review

Fix Number

FIX18988370

Manufacturer Part Number

90559116

This item is an authentic Black and Decker replacement part that has been sourced from the original manufacturer to be used with trimmers. The metal blade attaches to the grass guard and is used to cut excess line to prevent damage to the guard. This item is priced as the blade only, please note the hardware is separate.

Fix Number

FIX18784372

Manufacturer Part Number

311826001

★★★★★

★★★★★

1 Review

Fix Number

FIX18784295

Manufacturer Part Number

311033001

This is an authentic OEM supplied part which is designed for use with Ryobi string trimmers. The guard is utilized to protect a user from the string and trimmings. It is an identical replacement for a damaged or a missing part that was included with a new unit. Make sure to refer to the owner's manual for your model to ensure the correct application. Note, this high-quality assembly includes a durable plastic guard with an attached blade and is sold as an individual item. A screwdriver will be needed to perform this repair.

★★★★★

★★★★★

4 Reviews

Fix Number

FIX18989021

Manufacturer Part Number

90597361-01

This is an OEM part sourced directly from the manufacturer. The blade & gear assembly is designed for use in a hedge trimmer from Black & Decker. This part is made of metal, and is used as the active cutting implement for the machine. You may require a screwdriver or wrench when replacing this part. This item is sold individually.