OEM Yard Man Tiller Parts & Accessories

Tiller Forward Drive Belt

$25.25

Fix Number: FIX10035467
Manufacturer Part Number: 954-04090

Genuine Manufacturer Sourced replacement part used on Walk-Behind Push Mowers. This is the Belt which connects to the Transmission and allows mower to mower forward. This part is made out of Rubber and it is Sold Individually. Clean the pulleys off before installing the new belt to ensure top performance and longevity with your new belt. Inspect belts periodically and replace them when worn to maintain peak performance.

SPARK PLUG 4 CYCL

$10.49

Fix Number: FIX19298356
Manufacturer Part Number: 794-00082

Watch the install video

Belt-v Rev Drv 3

$24.15

Fix Number: FIX10035469
Manufacturer Part Number: 954-04091

This is a Genuine OEM Sourced replacement part used on Walk-Behind Push Mowers and RotoTillers. This is the Belt which connects to the Transmission and allows mower to drive reverse. This part is made out of Rubber and it is Sold Individually. Clean the pulleys off before installing the new belt to ensure top performance and longevity with your new belt. Inspect belts periodically and replace them when worn to maintain peak performance. To replace this belt you would need a Wrench and a Screwdriver.

Washer-lock 5/16

$6.55

Fix Number: FIX9311087
Manufacturer Part Number: 936-0119

This lock washer is used to resist the loosening of bolted joints. Repair tip: It is difficult to install the lock washer in a tight place or when the bolt/screw is pointing down. This lock works with the following snowblowers: Lawn tractor, tiller, chipper, shredder, lawn mower, snow blower, leaf blower/vacuum, log splitter, edger, hedge trimmer, and engine. Refer to the manual provided by the manufacturer for repair instructions.

Hold Down-cable

$6.51

Fix Number: FIX9167431
Manufacturer Part Number: 946-0605

This is a genuine replacement part manufactured for use with tillers and snow throwers. The cable barrel assembly is used to secure the clutch cable to the clutch control handle. This special cable barrel holder is sold individually.

Installation Instructions

BURTON from SAN ANTONIO, TX

Ends of control cables are attached with small plastic holder that easily breaks.

Remove small broken plastic cable barrel holder from handle bar mounted control lever with medium standard blade screw driver. Insert control cable barrel into the new replacement holder and re-install to the control lever using existing mounting screw. Order extra cable barrel holders and attach to tiller handle with wire or ty-rap so you have them handy for future use. Easy to replace but tiller is useless without it. Each holder has an "L" or "R" marked on them for reference and must be the same as replaced. Read more...

Watch the install video

Petrol Line Assembly

$22.99

★★★★★

1 Review

Fix Number: FIX9137021
Manufacturer Part Number: 791-682039

This fuel line filters the fuel in the tank as it pushes into the carburetor by the primer bulb. If your carburetor is not getting fuel, ports get clogged, or the fuel line is leaking, then replacing this part will solve these problems. It is important to replace it as soon as damage is noticed because clogging can result in your engine not starting. For this repair, you will need the following tools: torx/Phillips drivers, long screwdriver, long-nosed pliers, long screwdriver, cutters or scissors, and two-cycle engine oil. For this repair, first remove the retainer ring from the fuel line and insert it through gas cap opening. Next, thread the fuel line through the hole in the bottom of the fuel tank and pull the line through to firmly place it against the tank wall. For the last steps, put the retainer ring on the fuel line and press the ring firmly against the external side of the fuel tank wall. Lastly, attach it to correct line on the carburetor.

Fixes these symptoms

Will Not Start
See more...

Watch the install video

Line, Fuel Return

$10.25

Fix Number: FIX9137685
Manufacturer Part Number: 791-181086

This is a fuel return line, and it is used with various outdoor lawn equipment. Fuel travels through the return line into the carburetor, and from the primer bulb/pump into the fuel system. The line returns the extra fuel back into the tank. This part will crack and become brittle over time. If your fuel line is leaking, you will need to replace it. Before you begin repair work on your equipment make sure you drain the fuel from the tank, and remove the spark plug.

Fixes these symptoms

Will Not Start
See more...

Nut-flglk 5/16-18

$6.51

Fix Number: FIX9092936
Manufacturer Part Number: 712-04063

This nut is fit for lawn and garden equipment and is used to resist loosening when properly threaded onto a bolt. The nut is sold individually. The diameter of the nut is 5/16 inches and the thread size is 18. Refer to the manual provided by the manufacturer for repair instructions.

Installation Instructions

Ronald from SPEARFISH, SD

Replace sheave plate and side skid shoes on snowblower.

Remove eight bolts and two skid shoes and bottom sheave plate. Replace in reverse order.
Most important, get the correct OEM parts from FIX.com. Refer to product parts list in model instruction manual.
Do that first and you too can see how easy this repair is and save big bucks charged by retail repair shop! Read more...

Lawn Mower Ground Drive Belt

$30.75

★★★★★

1 Review

Fix Number: FIX9172714
Manufacturer Part Number: 954-04032B

This is a drive belt and it is used on various outdoor lawn equipment. This part is made of rubber and is sold individually. It measures to be 35.80 inches by 0.5 inches. This part drives the transmission, which propels the wheels on your machine. Pro tip, clean off the pulleys before installing this part for a longer lifespan. We recommend inspecting your belt periodically as they wear out quickly, depending on usage.

Bushing-.380 Id

$6.51

Fix Number: FIX9167515
Manufacturer Part Number: 941-0475

This is a plastic bushing for your lawn equipment. It fits onto the side of your fuel tank, and holds the fuel fittings so they do not touch sharp metal. This part is made of plastic, and will eventually wear out. When that happens, you must replace it. Before making this repair, we recommend letting your machine cool, and draining the gas tank.

Yard Man Tiller Parts

Popular Yard Man Tiller Parts

Installation Instructions

Installation Instructions

Yard Man Tiller Appliance Types

Related Yard Man Tiller Parts

Popular Yard Man Tiller Models

Yard Man Tiller Parts

Start With Your Model Number

Popular Yard Man Tiller Parts

Installation Instructions

Installation Instructions

Yard Man Tiller Appliance Types

Related Yard Man Tiller Parts

Popular Yard Man Tiller Models