Homelite Tiller Parts

Spark Plug

★★★★★

★★★★★

1 Review

This spark plug is used for lawn and garden equipment engines, such as trimmers, hedge trimmers, leaf blowers, cultivators, edgers, tillers and power brooms. The spark plug delivers electric current from an ignition system to an internal combustion engine, basically igniting the fuel in the engine. With use, spark plugs can become dirty and fouled, if this is the case then replace your spark plug to solve this issue. Repair tip: you will need to gap your spark plug. Follow instructions in the manual provided by the manufacturer for further guidance.

Bumper This bumper fits various gardening tools and is sold individually. The bumper secures the fuel tank and minimizes movement of tank. For installation instructions, refer to the manual provided by the manufacturer.

Carburetor Gasket

Primer Bulb (For Ruixing Carbs) This is an OEM primer bulb, and it is sold individually. Pressing the bulb removes the air out of the carburetor. Fuel is then forced from the fuel tank, which flows through the fuel line and into the carburetor. The extra fuel then goes back into the fuel tank via the fuel return line. Due to its constant contact with fuel and its rubber material, it can wear or crack over time, and will need a replacement.

Spring & Container

★★★★★

★★★★★

1 Review

This spring or container fits gardening tools such as a trimmer. The spring works to recoil a starter rope. If your spring has been worn out, it can lose tension and even break. If the spring breaks, the starter rope will not retract. To prevent this, it is best to replace the spring. The tools needed for this repair are: T25 Torx bit, spark plug wrench, clutch tool, and rope. For installation instructions refer to the diagram provided by the manufacturer.

Intake Gasket

Carburetor Gasket

Tine Assembly (D)

Piston Ring 30CC

Primer - Bulb