OEM Cub Cadet Tiller Parts & Accessories

Tiller Forward Drive Belt

$29.05

Fix Number: FIX10035467
Manufacturer Part Number: 954-04090

Genuine Manufacturer Sourced replacement part used on Walk-Behind Push Mowers. This is the Belt which connects to the Transmission and allows mower to mower forward. This part is made out of Rubber and it is Sold Individually. Clean the pulleys off before installing the new belt to ensure top performance and longevity with your new belt. Inspect belts periodically and replace them when worn to maintain peak performance.

Watch the install video

Belt-v Rev Drv 3

$27.55

Fix Number: FIX10035469
Manufacturer Part Number: 954-04091

This is a Genuine OEM Sourced replacement part used on Walk-Behind Push Mowers and RotoTillers. This is the Belt which connects to the Transmission and allows mower to drive reverse. This part is made out of Rubber and it is Sold Individually. Clean the pulleys off before installing the new belt to ensure top performance and longevity with your new belt. Inspect belts periodically and replace them when worn to maintain peak performance. To replace this belt you would need a Wrench and a Screwdriver.

Washer-lock 5/16

$6.69

Fix Number: FIX9311087
Manufacturer Part Number: 936-0119

This lock washer is used to resist the loosening of bolted joints. Repair tip: It is difficult to install the lock washer in a tight place or when the bolt/screw is pointing down. This lock works with the following snowblowers: Lawn tractor, tiller, chipper, shredder, lawn mower, snow blower, leaf blower/vacuum, log splitter, edger, hedge trimmer, and engine. Refer to the manual provided by the manufacturer for repair instructions.

Cultivator Air Filter

$6.51

Fix Number: FIX9117898
Manufacturer Part Number: 753-05996

This filter is an authentic OEM replacement part sourced directly from the manufacturer. It is commonly used in MTD and Troy-Bilt tillers and cultivators. This part filters the air entering the carburetor. Without a proper air filter, the machine may stop running. It should be replaced if it is worn or clogged beyond cleaning. It is sold individually, and a screwdriver is needed to replace it.

Pin:cotter

$7.73

Fix Number: FIX9094228
Manufacturer Part Number: 714-04043

This is an authentic manufacturer sourced replacement cotter pin. It is a standard hardware commonly used on lawn and garden equipment, please refer to appropriate diagrams of your unit for correct location and use of this item. This metal cotter pin is sold individually.

Installation Instructions

Paul from LEBANON, PA

clevis pin had come out of rototiller tines and tine came off.

Step1. remove side cover of rototiller tines
Step2. clean off shaft and slide tine back into position.
Step3. Insert clevis pin through holes and clip in place with cotter pin.
Step4. Put side cover back in place and tighten wingnuts. Read more...

Bushing-.380 Id

$6.51

Fix Number: FIX9167515
Manufacturer Part Number: 941-0475

This is a plastic bushing for your lawn equipment. It fits onto the side of your fuel tank, and holds the fuel fittings so they do not touch sharp metal. This part is made of plastic, and will eventually wear out. When that happens, you must replace it. Before making this repair, we recommend letting your machine cool, and draining the gas tank.

Hold Down-cable

$6.51

Fix Number: FIX9167431
Manufacturer Part Number: 946-0605

This is a genuine replacement part manufactured for use with tillers and snow throwers. The cable barrel assembly is used to secure the clutch cable to the clutch control handle. This special cable barrel holder is sold individually.

Installation Instructions

BURTON from SAN ANTONIO, TX

Ends of control cables are attached with small plastic holder that easily breaks.

Remove small broken plastic cable barrel holder from handle bar mounted control lever with medium standard blade screw driver. Insert control cable barrel into the new replacement holder and re-install to the control lever using existing mounting screw. Order extra cable barrel holders and attach to tiller handle with wire or ty-rap so you have them handy for future use. Easy to replace but tiller is useless without it. Each holder has an "L" or "R" marked on them for reference and must be the same as replaced. Read more...

Spark Plug

$20.06

Fix Number: FIX9123562
Manufacturer Part Number: 759-3336

This is an original part from MTD. This high-quality item was designed for use in lawn tractors and is used to deliver the electric current from the ignition system to the internal combustion engine. Over time spark plugs will get dirty or fouled requiring replacement. Please make sure to check the appropriate diagrams of your model for the correct location and application of this hardware. One item is included per order.

Carriage Bolt 5/16-18 x 3/4" Lg.

$6.51

Fix Number: FIX9298671
Manufacturer Part Number: 710-0451

This carriage bolt fits a variety of tools and is sold individually. The square area under the head of the bolt is created to fit into a square hole in your tool. The hole makes sure to restrain the bolt and prevents it from turning when the nut is secured or tightened.

Installation Instructions

Ronald from SPEARFISH, SD

Replace sheave plate and side skid shoes on snowblower.

Remove eight bolts and two skid shoes and bottom sheave plate. Replace in reverse order.
Most important, get the correct OEM parts from FIX.com. Refer to product parts list in model instruction manual.
Do that first and you too can see how easy this repair is and save big bucks charged by retail repair shop! Read more...

Fuel Bowl O-Ring

$11.02

Fix Number: FIX17016670
Manufacturer Part Number: 951-11589A

This high-quality fuel bowl O-ring is a genuine replacement part supplied by the original equipment manufacturer for use with lawn and garden equipment. It is designed to create an airtight seal for the fuel bowl, helping to prevent leaks and maintain proper engine performance. Over time, the O-ring may shrink, crack, or degrade, requiring replacement to ensure continued reliability. Made from durable rubber, this part is sold individually and includes one O-ring per order.

Cub Cadet Tiller Parts

Popular Cub Cadet Tiller Parts

Installation Instructions

Installation Instructions

Installation Instructions

Cub Cadet Tiller Appliance Types

Related Cub Cadet Tiller Parts

Popular Cub Cadet Tiller Models

Cub Cadet Tiller Parts

Start With Your Model Number

Popular Cub Cadet Tiller Parts

Installation Instructions

Installation Instructions

Installation Instructions

Cub Cadet Tiller Appliance Types

Related Cub Cadet Tiller Parts

Popular Cub Cadet Tiller Models