OEM Craftsman Tiller Parts & Accessories

Nut-flglk 5/16-18

$6.51

Fix Number: FIX9092936
Manufacturer Part Number: 712-04063

This nut is fit for lawn and garden equipment and is used to resist loosening when properly threaded onto a bolt. The nut is sold individually. The diameter of the nut is 5/16 inches and the thread size is 18. Refer to the manual provided by the manufacturer for repair instructions.

Installation Instructions

Ronald from SPEARFISH, SD

Replace sheave plate and side skid shoes on snowblower.

Remove eight bolts and two skid shoes and bottom sheave plate. Replace in reverse order.
Most important, get the correct OEM parts from FIX.com. Refer to product parts list in model instruction manual.
Do that first and you too can see how easy this repair is and save big bucks charged by retail repair shop! Read more...

Clevis Pin

$7.52

Fix Number: FIX9009427
Manufacturer Part Number: 532132673

This is a genuine component which is specially designed for use with Poulan, Husqvarna, Weed Eater and Jonsered tillers. It is supplied directly from the original equipment manufacturer. This item provides a high-quality replacement for a missing or a faulty hardware that was installed on a new unit. The clevis pin is installed in order to protect your tiller. If the auger gets jammed or clogged, the pin is designed to snap at a certain point of pressure, so it will not damage any other part of the unit. Please make sure to refer to the appropriate diagrams of your model for the correct application of this part. Keep in mind this high-quality clevis pin is made of durable metal and is sold individually. Replacing it is a simple task that should only require pliers to remove the old and secure the new.

Belt, V

$18.65

Fix Number: FIX17016528
Manufacturer Part Number: 591372401

This genuine OEM replacement drive belt is designed for use with rotary lawn mowers and garden tillers, providing a reliable connection between the engine and the cutting or tilling mechanism. Made from high-quality, durable rubber, this belt is built to withstand regular outdoor use and is sold individually. Replacing the belt is a relatively simple task that requires only a screwdriver. To perform the repair, first disconnect the spark plug to ensure safety. Then, remove the belt cover to access the old belt. After removing the worn belt, install the new one in its place, secure the cover, and reconnect the spark plug. Always consult your equipment’s manual for model-specific guidance and safety precautions.

Watch the install video

Tiller Forward Drive Belt

$25.25

Fix Number: FIX10035467
Manufacturer Part Number: 954-04090

Genuine Manufacturer Sourced replacement part used on Walk-Behind Push Mowers. This is the Belt which connects to the Transmission and allows mower to mower forward. This part is made out of Rubber and it is Sold Individually. Clean the pulleys off before installing the new belt to ensure top performance and longevity with your new belt. Inspect belts periodically and replace them when worn to maintain peak performance.

Tiller Wheel Shaft Oil Seal

$15.83

Fix Number: FIX10027983
Manufacturer Part Number: 921-04031

SPARK PLUG 4 CYCL

$10.49

Fix Number: FIX19298356
Manufacturer Part Number: 794-00082

Watch the install video

Belt-v Rev Drv 3

$24.15

Fix Number: FIX10035469
Manufacturer Part Number: 954-04091

This is a Genuine OEM Sourced replacement part used on Walk-Behind Push Mowers and RotoTillers. This is the Belt which connects to the Transmission and allows mower to drive reverse. This part is made out of Rubber and it is Sold Individually. Clean the pulleys off before installing the new belt to ensure top performance and longevity with your new belt. Inspect belts periodically and replace them when worn to maintain peak performance. To replace this belt you would need a Wrench and a Screwdriver.

Fuel Tank Asm

$28.97

★★★★★

1 Review

Fix Number: FIX11812933
Manufacturer Part Number: 753-06797

This is an authentic part that is supplied directly from the original equipment manufacturer for Craftsman trimmers. The fuel tank houses the fuel used to power the machine. This part is made of hard plastic and is sold individually. The fuel cap and fuel lines are included in the assembly. For installation you will need a screw driver to remove and shrouds and covers.

Fixes these symptoms

Will Not Start
See more...

Watch the install video

Line, Fuel Return

$10.25

Fix Number: FIX9137685
Manufacturer Part Number: 791-181086

This is a fuel return line, and it is used with various outdoor lawn equipment. Fuel travels through the return line into the carburetor, and from the primer bulb/pump into the fuel system. The line returns the extra fuel back into the tank. This part will crack and become brittle over time. If your fuel line is leaking, you will need to replace it. Before you begin repair work on your equipment make sure you drain the fuel from the tank, and remove the spark plug.

Fixes these symptoms

Will Not Start
See more...

Fuel Bowl O-Ring

$9.98

Fix Number: FIX17016670
Manufacturer Part Number: 951-11589A

This high-quality fuel bowl O-ring is a genuine replacement part supplied by the original equipment manufacturer for use with lawn and garden equipment. It is designed to create an airtight seal for the fuel bowl, helping to prevent leaks and maintain proper engine performance. Over time, the O-ring may shrink, crack, or degrade, requiring replacement to ensure continued reliability. Made from durable rubber, this part is sold individually and includes one O-ring per order.

Craftsman Tiller Parts

Popular Craftsman Tiller Parts

Installation Instructions

Craftsman Tiller Appliance Types

Related Craftsman Tiller Parts

Popular Craftsman Tiller Models

Craftsman Tiller Parts

Start With Your Model Number

Popular Craftsman Tiller Parts

Installation Instructions

Craftsman Tiller Appliance Types

Related Craftsman Tiller Parts

Popular Craftsman Tiller Models