Official Snapper Snow Blower Hardware

Snow Blower Shear Pin

$6.25

Fix Number: FIX9999468
Manufacturer Part Number: 703063

This is a genuine OEM sourced replacement shear pin designed for use with snow blowers/throwers. Shear pins are installed in order to protect your snowblower and it measures 1/4 X 1.750. If the auger gets jammed or clogged, shear bolt is designed to snap at a certain point of pressure, so it will not damage any other part of the unit. This pin is made out of metal and it is sold individually. Please note the cotter pin used to secure this pin is sold separately. In order to install or remove this pin you will need pliers.

Lawn Mower Nut

$8.00

Fix Number: FIX9999668
Manufacturer Part Number: 703409

This nut is mostly used in lawn tractors and snow blowers and is in different locations in the machine, depending on snowblower. It is made from metal and measures to 5/16 inches for the diameter and a thread count of 18. Tip: Remember there are different nuts used in the machine, be sure you are ordering the correct part. The tool needed for this repair is a wrench. *Please note: this part is sold individually. Refer to the diagram provided by the manufacturer for instructions.

Pin, 3/32 X 1.6

$6.25

Fix Number: FIX9999596
Manufacturer Part Number: 703300

This is a hair pin clip for your lawn equipment. You may also know it as a cotter pin. It is a multi-application part, depending on your unit, as well as the make and model. To correctly install the pin, refer to the diagrams provided with your equipment. It is made of metal, and can be used in various locations in the machine. You will need pliers to install this part.

Lawn Mower Flat Washer

$6.25

Fix Number: FIX9999890
Manufacturer Part Number: 703590

This is an authentic Murray replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers. The metal washer is used to provide spacing between the steering spindle and the front axle assembly. This item is sold individually, please note two washers may be needed.

Nut, 3/8-16 Hex Nyloc

$6.25

Fix Number: FIX9961948
Manufacturer Part Number: 5025394SM

This is a genuine manufacturer-sourced part which is specially designed for use with Murray, Snapper and Simplicity lawn and garden equipment. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt. This is standard hardware which may have multiple applications, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality nut is made of durable metal and is sold individually.

BOLT, 5/16-18 X 3/4-INCH,

$6.25

Fix Number: FIX18594580
Manufacturer Part Number: 5025145X6SM

Lawn Mower Washer

$6.25

Fix Number: FIX9999501
Manufacturer Part Number: 703128

This item has been sourced from the original manufacturer to be used with lawn tractors from Murray. The metal washer is used with different types of mowers and the application of the washer can vary based on the model of the machine. This washer is sold as an individual replacement part.

Lawn Mower Flat Washer

$6.25

Fix Number: FIX9081216
Manufacturer Part Number: 7010935SM

The metal flat washer is priced individually. It attaches to the cast iron axle along with the bolt and the bearing. A set of pliers, a screwdriver, and a wrench may be necessary during the installation of this item. This is an original part for Murray lawn tractors and Snapper rear engine rider mowers.

Nut, Cntr Lck, 3/8-16

$9.60

Fix Number: FIX10000167
Manufacturer Part Number: 703893

This is a genuine OEM sourced replacement part for Lawn and Garden equipment. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt. It will have different applications based on your equipment. Please refer to diagrams for proper use. This item is metal an is sold individually. You would need a wrench to tighten/loosen this nut.

Snow Blower Screw 1/4-20x1.75

$8.66

Fix Number: FIX9999460
Manufacturer Part Number: 703057

This is a genuine OEM sourced replacement hardware designed for use with snowblowers. Shear bolts are installed in order to protect your unit. If the auger gets jammed or clogged, shear bolt is designed to snap at a certain point of pressure, so it will not damage any other part of the unit. It is made from metal and it is sold individually. You will need a wrench to remove or install this bolt.

Snapper Snow Blower Hardware

Popular Snapper Snow Blower Hardware

Related Snapper Snow Blower Parts

Snapper Snow Blower Hardware

Start With Your Model Number

Popular Snapper Snow Blower Hardware

Related Snapper Snow Blower Parts