Official Husqvarna Snow Blower Hardware

Lawn Mower Ring Clip

$6.51

Fix Number: FIX9143890
Manufacturer Part Number: 812000029

This manufacturer-approved ring clip is found in various lawn and garden equipment models. A ring clip is used as a fastener that secures components or assemblies onto a shaft or housing (such as part of a mower wheel or steering assembly). When it is installed, the part that is visible acts as a shoulder, holding the specific component or assembly together. This very small metal ring clip (approximately 1-inch by 1-inch) is sold individually.

Lawn Mower Mandrel Spacer Washer

$7.16

Fix Number: FIX9286886
Manufacturer Part Number: 532187690

This is an OEM lawn mower deck mandrel spacer washer, sold individually. It measures approximately 43/64-Inches in diameter, 1-1/8-Inches outer diameter, and 5/32-Inches thick (these measurements are approximate). In general, washers help to spread load, can provide insulation such as electrical, and can also help to prevent galvanic corrosion.

Lawn Mower Hardened Washer

$6.51

Fix Number: FIX9015920
Manufacturer Part Number: 532188967

This is a Genuine Manufacturer Approved replacement washer used on lawn and garden equipment. This part is made out of Metal and is Sold Individually. Washer helps to distribute the pressure evenly over the surface and provides a solid grip.

Lawn Mower Flangelock Hex Nut

$6.51

Fix Number: FIX9022497
Manufacturer Part Number: 532409149

This is a genuine hex flange locknut for a lawn mower. It attaches to the carriage bolt (sold separately), fastening the axle assembly braces in place. This part is sold individually, however most models require three. For this repair you will need a wrench set.

Carriage Bolt

$6.51

Fix Number: FIX16381841
Manufacturer Part Number: 596136401

Genuine Manufacturer Approved Carriage Bolt is a standard part that fits a variety of products. This part is sold individually and the Nut is not included. The square area under the head is designed to fit into a square hole in the workpiece. It is this square hole that restrains the bolt and keeps it from turning when the nut is tightened.

Washer 5/16 Std Flt

$6.51

Fix Number: FIX16381824
Manufacturer Part Number: 596134901

It is an authentic item that is supplied directly from the original equipment manufacturer for use with Husqvarna and Poulan lawn and garden equipment. A washer is generally utilized to provide a tight seal between connected parts, over time it may wear out or simply get lost eventually requiring a replacement. Please make sure to check the appropriate diagrams of your specific model for the correct location and application of this hardware. Keep in mind this durable metal washer is sold individually.

Nut Lock

$6.51

Fix Number: FIX16381792
Manufacturer Part Number: 596040501

This is a Manufacturer Approved replacement nut for lawn and garden equipment. This item is Metal an is Sold Individually. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt.

Hex Head Screw 3/8-24x1-3/8 Gr. 8

$6.51

Fix Number: FIX9026163
Manufacturer Part Number: 532851084

This is an OEM part sourced directly from Husqvarna. This grade 8 hex head screw is made of metal and measures approximately 3/8 - 24 x 1 ? 3/8. This screw is commonly used in lawn mowers, snow blowers, and tillers. The use depends on the equipment type, for instance in lawn mowers it can be used to hold the blade in place, in the assembly of snow blowers it can be used to hold pulleys in place. This is why we recommend you refer to model specific diagrams for appropriate uses and applications. This screw is sold individually, and you will need a wrench to successful install it.

Lawn Mower Handle Bolt

$8.70

Fix Number: FIX9014802
Manufacturer Part Number: 532191574

This manufacturer approved bolt is made for lawn and garden equipment. In conjunction with handle knob it helps to secure the upper and lower handles together. The way this bolt is designed, you will need no tools to replace it. The square area under the head is made to fit into a square hole of the handle. This opening restrains the bolt and keeps it from turning when the handle knob/nut is tightened. Includes one (1) bolt per order.

Lock Washer

$6.51

Fix Number: FIX16381888
Manufacturer Part Number: 596238701

This is a genuine OEM replacement part used on a variety of Lawn and Garden Equipment. This part is made out of Metal and it is Sold Individually. This steel washer has several applications based on your unit. Please refer to diagrams for proper application.

Husqvarna Snow Blower Hardware

Popular Husqvarna Snow Blower Hardware

Related Husqvarna Snow Blower Parts

Husqvarna Snow Blower Hardware

Start With Your Model Number

Popular Husqvarna Snow Blower Hardware

Related Husqvarna Snow Blower Parts