OEM Bolens Snow Blower Parts & Accessories

Lawn Mower Flanged Lock Nut

$6.51

Fix Number: FIX9095080
Manufacturer Part Number: 712-04065

This lock nut is used for lawn and garden equipment, and is sold individually. This nut resists loosening when it is correctly threaded onto a bolt in your tool. The measurements are: the diameter of the bolt hole is 3/8 inches and the thread count is 16. For instructions on where the lock nut is located in your tool refer to the manual provided by the manufacturer.

Fuel Bowl O-Ring

$11.02

Fix Number: FIX17016670
Manufacturer Part Number: 951-11589A

This high-quality fuel bowl O-ring is a genuine replacement part supplied by the original equipment manufacturer for use with lawn and garden equipment. It is designed to create an airtight seal for the fuel bowl, helping to prevent leaks and maintain proper engine performance. Over time, the O-ring may shrink, crack, or degrade, requiring replacement to ensure continued reliability. Made from durable rubber, this part is sold individually and includes one O-ring per order.

Carriage Bolt 5/16-18 x 3/4" Lg.

$6.51

Fix Number: FIX9298671
Manufacturer Part Number: 710-0451

This carriage bolt fits a variety of tools and is sold individually. The square area under the head of the bolt is created to fit into a square hole in your tool. The hole makes sure to restrain the bolt and prevents it from turning when the nut is secured or tightened.

Installation Instructions

Ronald from SPEARFISH, SD

Replace sheave plate and side skid shoes on snowblower.

Remove eight bolts and two skid shoes and bottom sheave plate. Replace in reverse order.
Most important, get the correct OEM parts from FIX.com. Refer to product parts list in model instruction manual.
Do that first and you too can see how easy this repair is and save big bucks charged by retail repair shop! Read more...

Clip-Hold Down (Nylon)

$17.97

Fix Number: FIX9903766
Manufacturer Part Number: 1724869099

Nut-flglk 5/16-18

$6.51

Fix Number: FIX9092936
Manufacturer Part Number: 712-04063

This nut is fit for lawn and garden equipment and is used to resist loosening when properly threaded onto a bolt. The nut is sold individually. The diameter of the nut is 5/16 inches and the thread size is 18. Refer to the manual provided by the manufacturer for repair instructions.

Installation Instructions

Ronald from SPEARFISH, SD

Replace sheave plate and side skid shoes on snowblower.

Remove eight bolts and two skid shoes and bottom sheave plate. Replace in reverse order.
Most important, get the correct OEM parts from FIX.com. Refer to product parts list in model instruction manual.
Do that first and you too can see how easy this repair is and save big bucks charged by retail repair shop! Read more...

Snow Blower Shave Plate (24 In)

$45.89

★★★★★

1 Review

Fix Number: FIX9306312
Manufacturer Part Number: 790-00120-0637

This is an authentic OEM sourced part which is specially manufactured for use with walk-behind snow throwers. The shave plate is used to scrape up the snow, please make sure to refer to the owners manual and the appropriate diagrams of your model for the correct location and application of this component. This high-quality shave plate is made of durable material and is sold individually. Keep in mind the hardware to secure it is sold separately.

Installation Instructions

Ronald from SPEARFISH, SD

Replace sheave plate and side skid shoes on snowblower.

Remove eight bolts and two skid shoes and bottom sheave plate. Replace in reverse order.
Most important, get the correct OEM parts from FIX.com. Refer to product parts list in model instruction manual.
Do that first and you too can see how easy this repair is and save big bucks charged by retail repair shop! Read more...

Pin-bow Tie Cotter

$6.51

Fix Number: FIX9096195
Manufacturer Part Number: 714-04040

This bow tie cotter pin fits snow blowers, as well as other gardening tools. The pin helps secure the auger to the shaft on a snow blower. Due to constant wear, this is a commonly replaced part. Tip: Extra pins are recommended. *Please note: this part is sold individually. For installation instructions, refer to the diagram provided by the manufacturer.

Fixes these symptoms

Auger will not turn
See more...

Installation Instructions

Laura from CANDLER, NC

The right side of the mowing deck was dragging the ground.

I identified the area and compared it to the opposite side which still had the cotter pin and place. The cotter pin on the right side had been lost in the mowing process. I used pliers to attach the new pin and all is well! Super glad to find a website that carries all parts for my dad's mower. He has dementia and can't remember where the manual is so I was glad to find fix.com. Read more...

Shear Pin, .25

$6.51

Fix Number: FIX9110822
Manufacturer Part Number: 738-04124A

Designed for use in MTD, Yard Machine, Troy-Bilt, Yard-Man, and Craftsman machines, this OEM approved Shear Pin fits a variety of models. For full compatibility, please see the "Model Cross Reference List" below. This is a shear pin for your lawn and garden equipment, most commonly your snow blower. It is designed to snap if your auger gets jammed or clogged, to protect your snow blower from further damage. Because this part is meant to snap at a certain point of pressure, it is a commonly replaced part in snow blowers. Consequently, we recommend keeping a spare on hand. This Shear Pin is approximately 1.75" long, and is sold individually.

Fixes these symptoms

Auger will not turn
See more...

Carburetor Gasket Plate

$6.51

★★★★★

1 Review

Fix Number: FIX17016727
Manufacturer Part Number: 751P11897B

This genuine carburetor gasket plate is an original replacement part sourced directly from the manufacturer for use in snowblowers by MTD, Yard Machines, Troy-Bilt, Yard Man, and Cub Cadet. Positioned between the carburetor and the choke control bracket, this component is essential for creating a secure, airtight seal that ensures proper engine performance. Made from a thin, durable material, the gasket plate may require replacement if it becomes damaged or worn. This item is sold individually and may require a socket set and pliers for installation. For best results, consult your equipment’s service manual and perform the repair with the engine off and cool.

Flange Bushing

$7.04

Fix Number: FIX16421956
Manufacturer Part Number: 741-0493C

This authentic manufacturer-supplied part is designed for Craftsman snowblowers. Flange bushings are used to provide support for components while allowing them to rotate with minimum friction. It is made of high-quality material and is sold individually. Make sure to check the diagrams for your model to ensure the correct replacement procedure. You may need a screwdriver and a wrench set to take apart and reassemble the equipment when performing this repair.

Bolens Snow Blower Parts

Popular Bolens Snow Blower Parts

Installation Instructions

Installation Instructions

Installation Instructions

Installation Instructions

Bolens Snow Blower Appliance Types

Related Bolens Snow Blower Parts

Popular Bolens Snow Blower Models

Bolens Snow Blower Parts

Start With Your Model Number

Popular Bolens Snow Blower Parts

Installation Instructions

Installation Instructions

Installation Instructions

Installation Instructions

Bolens Snow Blower Appliance Types

Related Bolens Snow Blower Parts

Popular Bolens Snow Blower Models