Leaf Blower / Vacuum Bearings

Fix Number

FIX9285698

Manufacturer Part Number

532110485

This is a single mandrel ball bearing for a mower. It is sold individually, however it is a good idea to have a couple of these on hand. This bearing is located on top of the shaft, which is part of the mandrel assembly. The mandrel assembly is bolted to the more deck. This bearing measures roughly 1-3/8-Inches inner diameter, 1.578-Inches outer diameter, and .475-Inches long.

Fix Number

FIX8887153

Manufacturer Part Number

1705897SM

This authentic replacement part is designed for use with Craftsman snowblowers. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This bearing helps to secure the arbor shaft, allowing it to rotate. Bearings experience constant wear from pressure, heat, vibration, and friction eventually requiring replacements. This high-quality component is made of durable metal and is sold individually. A wrench set will be needed to perform this repair.

Fix Number

FIX9270711

Manufacturer Part Number

2108202SM

This greased bearing is used on lawn and gardening tools and is sold individually. This part works to reduce friction between rotating parts. This happens when the balls receive the load and spin, which spreads the weight equally whilst the minimal contact area of the part reduces the friction. It is important to repeatedly check for bearings and replace them periodically as they experience constant wear when in operation from pressure, vibration, and heat. For this repair you will need a screwdriver and a set of wrenches. Remember to unplug or turn off power tool before starting this installation project.

Fix Number

FIX10141492

Manufacturer Part Number

210059-1

This authentic replacement part which is specially designed for use with Makita power tools. Ball bearings are used to reduce friction between rotating parts, over time components may begin to wear out and fail eventually requiring a replacement. Please note this high-quality ball bearing is made of durable metal and it is sold individually.

Fix Number

FIX8960493

Manufacturer Part Number

38-7820

This is a Genuine Manufacturer Approved replacement part used on Toro Snowthrowers. This Ball Bearing has multiple applications in the Snowthrowers. This part is made out of Metal and it is Sold Individually. Ball Bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the tool and allows it to run smoothly. Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement. To replace this Bearing you would need a Screwdriver and a Set of Wrenches.

Fix Number

FIX9167899

Manufacturer Part Number

941-0600

This is a genuine OEM sourced replacement part that is intended to be used with lawnmowers, snowthrowers, and tillers from Bolens, Ryobi, Yard Machines, MTD, Troy-Bilt, and Yard-Man. The sealed bearing is used to limit friction between a rotating shaft and a fixed part assembly. It is recommended to review your models illustrated part diagram to confirm the bearing\\\'s compatibility. This item is sold as an individual replacement part.

Fix Number

FIX18787122

Manufacturer Part Number

612854001

Fix Number

FIX9302372

Manufacturer Part Number

741-0487C

This is a flange bearing for your lawn and garden equipment. It is a bearing contained inside a housing unit that provides a strong and secure position, while still allowing the bearing within to rotate. It has an inner diameter of 0.6 inches. This part is most commonly used on a shaft to allow the shaft to spin inside the cylinder.

Fix Number

FIX9166183

Manufacturer Part Number

9403536201

This authentic replacement part is supplied directly from the original equipment manufacturer for use with Shindaiwa and Echo handheld lawn and garden equipment. Ball bearings are used to reduce friction between rotating parts, over time due to heat, pressure and vibration the components may wear out and begin to fail eventually requiring a replacement. For the correct location and application of the part make sure to check the appropriate diagrams of your model. Keep in mind this high-quality bearing is made of durable metal and is sold individually.

Fix Number

FIX9242597

Manufacturer Part Number

V555000010

t is an authentic replacement bearing that is supplied by the original equipment manufacturer for Shindaiwa and Echo lawn and garden equipment. Needle bearings are used to reduce friction between rotating parts. The rollers take the load and spin, distributing the weight evenly while the minimal contact area of the roller reduces friction. Symptoms of a failing bearing may include squealing, screeching, and an entirely new type of grinding noise. This high-quality component is made of durable metal and is sold as an individual part. Make sure to refer to the appropriate diagrams for your model to ensure the proper replacement procedure.