Lawn Tractor Switches

Fix Number

FIX9020864

Manufacturer Part Number

532193350

This ignition switch has been sourced directly from the original manufacturer and is sold individually (key sold separately). The ignition switch is also sometimes referred to as a starter switch and is enclosed in a plastic housing. A common sign that this part is malfunctioning is if the electric starter is not engaging. For this quick and easy repair, start by making sure the switch is in the off position and the key has been removed. Lift the hood up, locate the steering housing and press the tabs to disengage the old switch. Disconnect the wires and install your new OEM ignition switch.

Fix Number

FIX11824426

Manufacturer Part Number

582107601

This is a genuine OEM power take-off (PTO) switch for a ride-on lawn mower. This switch engages the electric clutch to spin the blades. This part includes one plastic PTO switch with a push-pull, snap mount and eight terminals. Mechanical switches, such as this one, will break down over time, and will need to be replaced. This is a quick and easy repair. Disconnect the spark plug before you begin. Disconnect the wires under the housing, remove the old switch by pressing the side tabs. Place the new PTO switch into position, reconnect the wires and spark plug, and test your equipment to make sure it is working.

Fix Number

FIX9286662

Manufacturer Part Number

532175566

This is an OEM sourced replacement ignition switch. It is commonly used on a variety of riding lawn mowers/tractors. Switch plays an important role because it allows user to easily start the mower using only a turn key. Because switches have mechanical internal parts, over time they will begin to fail requiring replacement. It has a plastic body and it is sold individually. Please note, the key is not included, it is sold separately. To replace this switch no tools will be needed. • Unplug the wires from an old switch • Remove the switch by squeezing tabs • Secure new switch in the opening • Reattach wires and test the new switch

Fix Number

FIX9013223

Manufacturer Part Number

532176138

It is a genuine manufacturer-approved part which is specially designed for Ryobi and Husqvarna riding lawn mowers and garden tractors. The purpose of the switch-interlock is to act as a safety feature which will shut the engine off when equipment is started or running in unsafe operating conditions. Unfortunately, over time parts will wear out and it may begin to fail eventually requiring a replacement. Refer to the owner\'s manual and the appropriate diagrams for your model for the correct location and installation of this component. Note, this high-quality plastic body interlock switch is sold individually. You will need a screwdriver to perform this repair.

Fix Number

FIX16413779

Manufacturer Part Number

725-04363

Fix Number

FIX8850978

Manufacturer Part Number

117-1197

This solenoid is an authentic manufacturer replacement part for use in lawn tractors. It sends the electrical current from the battery to the motor to allow the tractor to start and run. The solenoid will need to be replaced if it is damaged or experiencing electrical failure. Signs of a failed solenoid include difficulties cranking the engine, hearing clicking or no sound at all when turning the ignition key, and a starter that cannot stop running. Begin the repair by disconnecting the battery for your safety. Take a note/picture of how the wire connectors are routed before disconnecting them. Remove the bolts that secure the solenoid in place and pull the faulty part out. Position the new solenoid in its place and secure it with the mounting bolts. Use your notes to reconnect the wiring and battery.

Fix Number

FIX11824427

Manufacturer Part Number

582107604

This PTO switch is an authentic manufacturer-supplied part which is made for use with Husqvarna riding lawn mowers and garden tractors. When pressed, it engages the clutch to turn the blades. Over time it may begin to malfunction or get damaged eventually requiring a replacement to ensure your equipment operates properly. Make sure to refer to the appropriate diagrams and the owner's manual for the exact location and the correct repair procedure. One durable plastic body PTO switch is sold individually. The switch is secured in the housing by two tabs on each side of the component. Replacing it is a simple task that does not require any tools.

Fix Number

FIX9016175

Manufacturer Part Number

532401545

It is a genuine part which is supplied by the original manufacturer for use with Husqvarna and Poulan riding lawn mowers and garden tractors. This replacement switch is secured under the seat to act as a safety feature, the mower will only start if the user is properly seated and it will shut down the mower if the user falls out of the seat. Over time switches may develop either electrical or mechanical issues eventually failing and requiring a replacement. Please note this high-quality component is made of durable plastic and it is sold individually.

Fix Number

FIX9016734

Manufacturer Part Number

532421062

This is an authentic OEM part for use with Craftsman Lawn Tractors. The interlock switch disables the ignition system if it detects the lawn tractor is started or running in unsafe operating conditions. This part is sold individually. The most common reasons for replacing the clutch interlock switch are when the mower won't start or starts when the brake is not depressed. The tool needed to replace the seat switch plunger is a -+ inch socket.

Fix Number

FIX9163215

Manufacturer Part Number

925-04659

This replacement part is supplied directly from the original equipment manufacturer for use with garden tractors and riding lawnmowers. The ignition switch is used to start the mower\\\'s engine utilized the ignition key. Note, the key is sold separately. This high-quality component is available as an individual replacement part. To ensure the correct installation and application of the new component, refer to the owners manual and the diagrams of your model. Replacing the switch is a simple task that may only require a screwdriver, press the tabs on the side of the switch to pull out the old one and secure the new one.