Yard Man Lawn Mower Control Cables

Fix Number

FIX19305064

Manufacturer Part Number

946-04661A

This is an authentic 51-inch control cable for walk-behind lawn mowers. This part is made up of a metal wire cable with a Z-type bent end on either side, and a 37.5-inch rubberized outer cover. When the control handle is released, the control cable stops the blade. If the cable breaks, the brake will not release even after pressing the lever. To remove the old cable, cut off any cable ties, remove the cable end from the control bail, and remove the control cable from the engine (you may need pliers). Remove the cables from the openings on the handle, which can be twisted off by rotating the cable at a 90-degree angle.

Fix Number

FIX10033928

Manufacturer Part Number

946-04173E

This is an OEM deck engagement cable, sold as one part. This part is for a lawnmower and its purpose is to engage the mowers blade, allowing you to control your engine zone. It consists of a metal wire cable, a rubber cover and an extension spring on one end and a Z-bend on the other. The cable casing length is approximately 39-inches and the inner wire length is about 56-inches.

Fix Number

FIX16463572

Manufacturer Part Number

946-04728A

This is an authentic replacement part that is supplied by the original equipment manufacturer for use with walk-behind lawn mowers. The drive cable stops the engine when a user lets go of the operator presence handle. When the brake cable is damaged or broken, the mower becomes temporarily inoperable requiring a replacement cable. Please note this high-quality durable rubber insulated cable is sold individually.

★★★★★

★★★★★

1 Review

Fix Number

FIX9180334

Manufacturer Part Number

946-1130

This Genuine OEM control cable is designed to connect the control handle to the engine mechanism on compatible lawn mowers, enabling safe and responsive blade engagement. When the control handle is pressed, the cable activates the blade rotation; releasing the handle stops the blade, ensuring operator safety. This specific part features a 40-inch covered housing with a total cable length of 53 inches, including 13 inches of exposed cable. It is sold individually and includes all necessary components for straightforward replacement. Please note that part number 946-1137 features a fully covered cable with a length of 53 inches. To ensure proper fit and function, carefully compare your existing cable before ordering.

Fix Number

FIX16463810

Manufacturer Part Number

946-1113A

This control cable is specially designed for use with walk-behind lawn mowers. It is supplied by the original equipment manufacturer. The cable is utilized to engage the blade. This part is connected to the control handle, over time it may wear out or get damaged eventually requiring a replacement. Refer to the owners manual and the appropriate diagrams of your model for the exact location and the correct installation. One durable rubber insulated cable is included. You may need pliers and a screwdriver to disconnect the old part and attach the new one.

Fix Number

FIX9166741

Manufacturer Part Number

946-04655A

This drive cable is an original part from the MTD manufacturer. This part is constructed of metal and wiring encased in plastic. The drive cable is compatible with many lawn mower machines. This item fastens the control lever assembly to the mower transmission. When the drive lever is pulled upward, the mower transmission is engaged. This part is sold individually. A wrench is helpful in making the repair.

Fix Number

FIX16463795

Manufacturer Part Number

946-0957

This is an authentic replacement part sourced directly from the manufacturer. The mower cable is commonly found in Craftsman lawn mowers. This is a metal cable with a flexible plastic casing, and it is used to connect the handle controls with the mower engine. You may require a wrench when replacing this item. The mower cable is available as an individual replacement part.

Fix Number

FIX9311847

Manufacturer Part Number

946-1132

Genuine OEM replacement part, this item is sold individually. The Blade Control Cable is the cable that stops the blade when the control handle is released on Walk-Behind Mowers. This part has Z bend on both ends. If the cable is broken it will cause the brake to not release even when the lever is pressed.

Fix Number

FIX10033969

Manufacturer Part Number

946-04703A

This is a genuine replacement component which is supplied directly from the original equipment manufacturer for use with walk-behind lawn mowers. It is the cable that stops the blade when the control handle is released if the cable is broken it will cause the brake to not release even when the lever is pressed. Please note this high-quality rubber insulated metal cable is sold individually.

★★★★★

★★★★★

1 Review

Fix Number

FIX9167632

Manufacturer Part Number

946-04206A

This variable-speed drive engagement cable is designed to control forward motion on walk-behind lawn mowers by linking the operator control to the drive system. It allows smooth engagement and speed adjustment during operation, helping the mower respond consistently while mowing. Ideal for replacing a stretched, frayed, or broken cable, it restores reliable self-propelled control and easier handling during regular lawn care.